Hi. I am Komang, university student.
I want to monitor the voltage and temperatur monitoring lm-sensor. I have
installed and configure sensor3.conf, and when i check the result by using
#sensors, the output like this :
root at relay:/home/relay# sensors
pc87366-isa-6620
Adapter: ISA adapter
VCORE: +0.00 V (min = +1.90 V, max = +2.10 V)
VCC: +0.00 V (min = +0.00 V, max = +0.00 V)
VPWR: +0.00 V (min = +5.93 V, max = +28.02 V)
+12V: +0.00 V (min = +11.02 V, max = +13.01 V)
-12V: -29.70 V (min = -13.04 V, max = -11.03 V)
GND: +0.00 V (min = +0.00 V, max = +0.00 V)
Vsb: +3.31 V (min = +3.00 V, max = +3.31 V)
Vdd: +6.03 V (min = +3.00 V, max = +3.59 V)
Vbat: +0.00 V (min = +2.40 V, max = +3.01 V)
AVdd: +6.03 V (min = +3.00 V, max = +3.59 V)
Temp: -128.0 C (low = +0.0 C, high = +70.0 C)
(crit = +85.0 C)
cpu0_vid: +0.000 V
There, we see that only partial data can be get from soekris 4801, even the
data that have been succesful gather is not correctly. Anyone can help?
I want to get all of the data by using lm-sensors.
Thanks.
-komang
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20080526/c52852d4/attachment.html
