Hi Oliver, You are writing to the wrong mailing list (i2c instead of lm-sensors) so I am redirecting. On Fri, 16 May 2008 14:59:21 +0200, Oliver Pinter wrote: > linux-2.6 - git HEAD on: 9662369 > lm-sensors: 1:3.0.1-5 > libsensors4: 1:3.0.1-5 > os: debian lenny > sernsor: w83627thf on asus p4c800 MB > > with 2.6.26-rcX kernel, reported false Battery values, > --------------------------------------> > VBat: +3.26 V (min = +0.02 V, max = +3.01 V) ALARM > <------------------------------------- There is nothing wrong here. +3.26V sounds possible and correct for the battery voltage. If you are worried about the min and max values: it is up to you to edit your sensors3.conf file to set them properly if the BIOS of your motherboard did not (apply the changes with "sensors -s"). The alarm will go away when you do. > lspci -xxx > 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus > Controller (rev 02) > 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 > 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 Completely irrelevant here, the Winbond W83627THF is an LPC chip, it doesn't have an I2C/SMBus interface, so the SMBus controller doesn't matter at all. -- Jean Delvare
