Hi all, I will take over maintenance of the w83791d driver. Thanks Charles for you work on it until now, I found it really useful! Also thanks for your help with finalizing the following patch. It takes into account an extra bit for the fan divisor of fans 1-3, enabling them to have fan divisors higher than 8. This also solves a bug where the reported fan speed is too high if the chip is initialized with a fan divisor larger than 8. Marc --- Update w83791d with fan bits in vbat mon register (7.48 of the datasheet). This change allows all fans to have a divisor of 128, and fixes a problem with incorrectly reported fan speeds. Signed-off-by: Marc Hulsman <m.hulsman at tudelft.nl> --- drivers/hwmon/w83791d.c | 26 ++++++++++++++++++++++---- Documentation/hwmon/w83791d | 6 +++--- 2 files changed, 25 insertions(+), 7 deletions(-) --- diff -uNrp linux-2.6.26-rc1-git6/drivers/hwmon/w83791d.c linux-2.6.26-rc1-git6-modified/drivers/hwmon/w83791d.c --- linux-2.6.26-rc1-git6/drivers/hwmon/w83791d.c 2008-05-03 20:59:44.000000000 +0200 +++ linux-2.6.26-rc1-git6-modified/drivers/hwmon/w83791d.c 2008-05-08 19:08:55.000000000 +0200 @@ -233,11 +233,9 @@ static u8 fan_to_reg(long rpm, int div) static u8 div_to_reg(int nr, long val) { int i; - int max; - /* first three fan's divisor max out at 8, rest max out at 128 */ - max = (nr < 3) ? 8 : 128; - val = SENSORS_LIMIT(val, 1, max) >> 1; + /* fan divisors max out at 128 */ + val = SENSORS_LIMIT(val, 1, 128) >> 1; for (i = 0; i < 7; i++) { if (val == 0) break; @@ -519,6 +517,7 @@ static ssize_t store_fan_div(struct devi unsigned long min; u8 tmp_fan_div; u8 fan_div_reg; + u8 vbat_reg; int indx = 0; u8 keep_mask = 0; u8 new_shift = 0; @@ -570,6 +569,16 @@ static ssize_t store_fan_div(struct devi w83791d_write(client, W83791D_REG_FAN_DIV[indx], fan_div_reg | tmp_fan_div); + /* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */ + if(nr < 3) { + keep_mask = ~(1 << (nr + 5)); + vbat_reg = w83791d_read(client, W83791D_REG_VBAT) + & keep_mask; + tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask; + w83791d_write(client, W83791D_REG_VBAT, + vbat_reg | tmp_fan_div); + } + /* Restore fan_min */ data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr])); w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); @@ -1245,6 +1254,7 @@ static struct w83791d_data *w83791d_upda struct w83791d_data *data = i2c_get_clientdata(client); int i, j; u8 reg_array_tmp[3]; + u8 vbat_reg; mutex_lock(&data->update_lock); @@ -1288,6 +1298,14 @@ static struct w83791d_data *w83791d_upda W83791D_REG_TEMP1[i]); } + /* The fan divisor for fans 0-2 get bit 2 from + bits 5-7 respectively of vbat register */ + vbat_reg = w83791d_read(client, W83791D_REG_VBAT); + for (i = 0; i < 3; i++) { + data->fan_div[i] |= ((vbat_reg & + (1 << (5 + i))) >> (3 + i)); + } + /* Update the rest of the temperature sensors */ for (i = 0; i < 2; i++) { for (j = 0; j < 3; j++) { diff -uNrp linux-2.6.26-rc1-git6/Documentation/hwmon/w83791d linux-2.6.26-rc1-git6-modified/Documentation/hwmon/w83791d --- linux-2.6.26-rc1-git6/Documentation/hwmon/w83791d 2008-05-03 20:59:44.000000000 +0200 +++ linux-2.6.26-rc1-git6-modified/Documentation/hwmon/w83791d 2008-05-08 18:52:46.000000000 +0200 @@ -22,6 +22,7 @@ Credits: Additional contributors: Sven Anders <anders at anduras.de> + Marc Hulsman <m.hulsman at tudelft.nl> Module Parameters ----------------- @@ -67,9 +68,8 @@ on until the temperature falls below the Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan -readings can be divided by a programmable divider (1, 2, 4, 8 for fan 1/2/3 -and 1, 2, 4, 8, 16, 32, 64 or 128 for fan 4/5) to give the readings more -range or accuracy. +readings can be divided by a programmable divider (1, 2, 4, 8, 16, +32, 64 or 128 for all fans) to give the readings more range or accuracy. Voltage sensors (also known as IN sensors) report their values in millivolts. An alarm is triggered if the voltage has crossed a programmable minimum