On Tue, 06 May 2008 14:53:50 +0200, Romain Dolbeau wrote: > As I have posted the dmidecode for this board, I'll mention it for the > sake of completeness. > > I don't have any configuration for the C2SBE, as the on board W83627DHG > is seen on the ISA bus (not on i2c?) but doesn't display anything. Can you include what this "nothing" looks like exactly? If that's all zeroes, the chip is there but unused. If that's nothing at all, it suggests that your version of libsensors is too old. Support for the W83627DHG was added in lm-sensors 2.10.2. > Here's what dmesg has to say: > > w83627ehf: Found W83627DHG chip at 0x290 > w83627ehf w83627ehf.656: VID pins in output mode, CPU VID not available Some boards don't use the integrated monitoring features of the Super-I/O, if the manufacturer prefers to add a dedicated monitoring chip on the SMBus. sensors-detect should tell. If that's a recent board, you need a recent version of sensors-detect: http://www.lm-sensors.org/browser/lm-sensors/branches/lm-sensors-3.0.0/prog/detect/sensors-detect?format=txt -- Jean Delvare
