On Sun, 2008-03-09 at 20:08 +0100, Joakim Larsson wrote: ok, so I downloaded the Ubuntu Feisty 2.6.20 kernel source and compiled the modules and then just copied the driver from the 2.6.24 kernel source and recompiled it. Then I did make modules_install. The modules now loads successfully: $ sudo modprobe hwmon-vid $ sudo modprobe w83627ehf $ dmesg <snip> [ 127.521735] w83627ehf: Found W83627DHG chip at 0x290 <snip> However when I run sensors I got the following output: $ sudo sensors w83627dhg-isa-0290 Adapter: ISA adapter And no other output. I'll try to debug but any hint's appreciated! :-) BR Joakim > I downloaded the latest sensors-detect script from lm-sensors.org > > <snip> > > > > So I suspect that the latest sensors-detect script is doing something > > > wrong. > > > > I don't think so. sensors-detect tells that you have a W83627DHG and I > > believe it is true. However, > > http://www.lm-sensors.org/wiki/Devices > > says that support for this chip was only added in kernel 2.6.21, while > > you're apparently running 2.6.20. This explains why the w83627ehf > > driver says "no device found". > > Got it, I'll try to backport the 2.6.20 code as a module and see if it > loads. > > // joakim > > > _______________________________________________ > lm-sensors mailing list > lm-sensors at lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
