On Wed, 05 Mar 2008 15:57:14 +0100, Stefan Sassenberg wrote: > Jean Delvare wrote: > > On Wed, 05 Mar 2008 11:31:30 +0100, Stefan Sassenberg wrote: > >> Jean Delvare wrote: > > > > I didn't notice at first but you wrote you were using lm-sensors 2.9.1. > > That's pretty old. In kernel 2.6.22 the w83627hf driver was converted > > from an i2c-isa driver to a platform driver (together with many other > > hwmon driver, as we were finally getting rid of i2c-isa.) Support for > > platform drivers was added to lm-sensors only in 2.10.0. So, no > > surprise it doesn't work for you. For a kernel >= 2.6.22, I would even > > recommend lm-sensors >= 2.10.3. > > > Very good. I could download deb packages of version 2.10.1. The next > version is 2.10.5 but there seem to be no lmsensors package of that > version for now. But now I get results: > > w83627thf-isa-0290 > Adapter: ISA adapter > VCore: +1.25 V (min = +0.70 V, max = +1.87 V) > +12V: +11.98 V (min = +6.51 V, max = +9.18 V) ALARM > +3.3V: +3.36 V (min = +0.26 V, max = +0.19 V) ALARM > +5V: +5.04 V (min = +2.72 V, max = +3.28 V) ALARM > -12V: -12.20 V (min = +3.27 V, max = -14.75 V) ALARM > V5SB: +5.05 V (min = +4.27 V, max = +1.61 V) ALARM > VBat: +3.22 V (min = +3.04 V, max = +3.92 V) > fan1: 0 RPM (min = 1035 RPM, div = 8) ALARM > CPU Fan: 0 RPM (min = 1171 RPM, div = 8) ALARM > fan3: 0 RPM (min = 3183 RPM, div = 8) ALARM > M/B Temp: -48?C (high = +29?C, hyst = +14?C) sensor = > thermistor > CPU Temp: +108.5?C (high = +120?C, hyst = +115?C) sensor = diode > > temp3: -48.0?C (high = +120?C, hyst = +115?C) sensor = > thermistor > alarms: Chassis intrusion detection ALARM > beep_enable: > Sound alarm enabled > > Thank you very much, Jean. My next problem are the strange values, but I > haven't read the manuals regarding that point yet. The voltages look rather good to me, but you should compare with what the BIOS says for confirmation. The limits are wrong but that's expected - set them in /etc/sensors.conf and run "sensors -s" to write them to the chip. No fan speeds, strange, unless you have no fans on that systems, or very very slow fans (in which case you should increase the fan_div values to 16 or even 32.) Are there fan speeds displayed in the BIOS? Temperatures look wrong, -48 typically means no sensor connected, +108.5?C is too high to be realistic unless your computer case is on fire ;) Try changing the thermal sensor types... although the BIOS should have set them up right. The lack of fan speeds and proper temperature readings might hint at an additional sensor chip on your board. If you can't get them out of the W83627THF, try running an up-to-date version of sensors-detect and see if it finds an extra chip on the SMBus. -- Jean Delvare
