All,
Here's a first shot at a config file for an Asus M2N-SLI Deluxe
motherboard. It may also work for other versions of the M2N-SLI; I
don't know.
Matt Roberds
-------------- next part --------------
# First cut at a minimal sensors3.conf for Asus M2N-SLI Deluxe motherboard
# Matt Roberds, 20 Feb 2008
chip "it8716-*"
# Voltages
label in0 "VCore"
label in1 "VDDR"
ignore in2 # 3.3 V?
label in3 "+5V" # VCC
label in4 "+12V"
label in5 "-12V"
label in6 "-5V"
label in7 "5VSB" # VCCH
label in8 "VBat"
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
compute in4 ((30/10)+1)*@ , @/((30/10)+1)
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
# in5 and in6 appear to be wrong (I get around -17 V and -9 V with these
# 'compute' lines), but I'm not sure how to adjust the 'compute' lines.
compute in5 (1+232/56)*@ - 4.096*232/56 , (@ + 4.096*232/56)/(1+232/56)
compute in6 (1+120/56)*@ - 4.096*120/56 , (@ + 4.096*120/56)/(1+120/56)
# Temperatures
# Not sure. temp1 always reads close to what k8temp reports for Core0.
# temp3 always reads approximate ambient temperature. temp2 is between
# temp1 and temp3.
# Fans
label fan1 "CPU Fan"
label fan2 "Chassis Fan 1"
label fan3 "Power Supply Fan"
chip "ADT7475-*"
# For some reason, ignoring vccp, remote1, and remote2 doesn't work. Is
# it because they have ALARM set?
# Voltages
ignore vccp
label vcc "+3.3V"
# Temperatures
# Not 100% sure. remote1 and 2 don't appear to be hooked up; local is
# on board the adt7475 chip itself.
ignore remote1
ignore remote2
# Fans
label fan1 "Chassis Fan 4"
label fan2 "Chassis Fan 2"
label fan3 "Chassis Fan 3"
ignore fan4
chip "k8temp-*"
label temp1 "Core0 Temp"
label temp3 "Core1 Temp"
