Looks good - assuming the bit positions are correct, which I can't
fully verify without a datasheet - and compiles cleanly.
Acked-by: Juerg Haefliger <juergh at gmail.com>
> The new libsensors needs these individual alarm files.
>
> Signed-off-by: Jean Delvare <khali at linux-fr.org>
> ---
> Anyone with an SMSC LPC47M1xx-compatible chip that could test this
> patch? Hartmut maybe?
>
> drivers/hwmon/smsc47m1.c | 25 ++++++++++++++++++++++---
> 1 file changed, 22 insertions(+), 3 deletions(-)
>
> --- linux-2.6.24-rc6.orig/drivers/hwmon/smsc47m1.c 2007-12-26
> 14:39:06.000000000 +0100
> +++ linux-2.6.24-rc6/drivers/hwmon/smsc47m1.c 2008-01-01
> 12:40:11.000000000 +0100
> @@ -198,6 +198,14 @@ static ssize_t get_fan_div(struct device
> return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
> }
>
> +static ssize_t get_fan_alarm(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + int bitnr = to_sensor_dev_attr(devattr)->index;
> + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
> + return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
> +}
> +
> static ssize_t get_pwm(struct device *dev, struct device_attribute
> *devattr, char *buf)
> {
> @@ -347,6 +355,8 @@ static SENSOR_DEVICE_ATTR(fan##offset##_
> get_fan_min, set_fan_min, offset - 1); \
> static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
> get_fan_div, set_fan_div, offset - 1); \
> +static SENSOR_DEVICE_ATTR(fan##offset##_alarm, S_IRUGO, get_fan_alarm, \
> + NULL, offset - 1); \
> static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
> get_pwm, set_pwm, offset - 1); \
> static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
> @@ -374,12 +384,15 @@ static struct attribute *smsc47m1_attrib
> &sensor_dev_attr_fan1_input.dev_attr.attr,
> &sensor_dev_attr_fan1_min.dev_attr.attr,
> &sensor_dev_attr_fan1_div.dev_attr.attr,
> + &sensor_dev_attr_fan1_alarm.dev_attr.attr,
> &sensor_dev_attr_fan2_input.dev_attr.attr,
> &sensor_dev_attr_fan2_min.dev_attr.attr,
> &sensor_dev_attr_fan2_div.dev_attr.attr,
> + &sensor_dev_attr_fan2_alarm.dev_attr.attr,
> &sensor_dev_attr_fan3_input.dev_attr.attr,
> &sensor_dev_attr_fan3_min.dev_attr.attr,
> &sensor_dev_attr_fan3_div.dev_attr.attr,
> + &sensor_dev_attr_fan3_alarm.dev_attr.attr,
>
> &sensor_dev_attr_pwm1.dev_attr.attr,
> &sensor_dev_attr_pwm1_enable.dev_attr.attr,
> @@ -533,7 +546,9 @@ static int __devinit smsc47m1_probe(stru
> || (err = device_create_file(dev,
> &sensor_dev_attr_fan1_min.dev_attr))
> || (err = device_create_file(dev,
> - &sensor_dev_attr_fan1_div.dev_attr)))
> + &sensor_dev_attr_fan1_div.dev_attr))
> + || (err = device_create_file(dev,
> + &sensor_dev_attr_fan1_alarm.dev_attr)))
> goto error_remove_files;
> } else
> dev_dbg(dev, "Fan 1 not enabled by hardware, skipping\n");
> @@ -544,7 +559,9 @@ static int __devinit smsc47m1_probe(stru
> || (err = device_create_file(dev,
> &sensor_dev_attr_fan2_min.dev_attr))
> || (err = device_create_file(dev,
> - &sensor_dev_attr_fan2_div.dev_attr)))
> + &sensor_dev_attr_fan2_div.dev_attr))
> + || (err = device_create_file(dev,
> + &sensor_dev_attr_fan2_alarm.dev_attr)))
> goto error_remove_files;
> } else
> dev_dbg(dev, "Fan 2 not enabled by hardware, skipping\n");
> @@ -555,7 +572,9 @@ static int __devinit smsc47m1_probe(stru
> || (err = device_create_file(dev,
> &sensor_dev_attr_fan3_min.dev_attr))
> || (err = device_create_file(dev,
> - &sensor_dev_attr_fan3_div.dev_attr)))
> + &sensor_dev_attr_fan3_div.dev_attr))
> + || (err = device_create_file(dev,
> + &sensor_dev_attr_fan3_alarm.dev_attr)))
> goto error_remove_files;
> } else if (data->type == smsc47m2)
> dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n");
>
>
> --
> Jean Delvare
>
