Hi Michal, On Feb 6, 2008 5:43 AM, Michal Medveck? <michal at medvecky.net> wrote: > Juerg Haefliger napsal(a): > > Can you unload the lm85 driver before running sensors-detect? > > > here it comes > > # sensors-detect revision $Revision$ > > This program will help you determine which kernel modules you need > to load to use lm_sensors most effectively. It is generally safe > and recommended to accept the default answers to all questions, > unless you know what you're doing. > > We can start with probing for (PCI) I2C or SMBus adapters. > Do you want to probe now? (YES/no): Probing for PCI bus adapters... > Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7 > > We will now try to load each adapter module in turn. > Module `i2c-i801' already loaded. > If you have undetectable or unsupported adapters, you can have them > scanned by manually loading the modules before running this script. > > We are now going to do the I2C/SMBus adapter probings. Some chips may > be double detected; we choose the one with the highest confidence > value in that case. > If you found that the adapter hung after probing a certain address, > you can specify that address to remain unprobed. > > Next adapter: SMBus I801 adapter at 3000 (i2c-0) > Do you want to scan it? (YES/no/selectively): Client found at address 0x2e > Probing for `Myson MTP008'... No > Probing for `National Semiconductor LM78'... No > Probing for `National Semiconductor LM78-J'... No > Probing for `National Semiconductor LM79'... No > Probing for `National Semiconductor LM80'... No > Probing for `National Semiconductor LM85 or LM96000'... No > Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... No > Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... No > Probing for `Analog Devices ADT7462'... No > Probing for `Analog Devices ADT7467 or ADT7468'... No > Probing for `Analog Devices ADT7470'... No > Probing for `Analog Devices ADT7473'... No > Probing for `Analog Devices ADT7475'... No > Probing for `Analog Devices ADT7476'... No > Probing for `Andigilog aSC7611'... No > Probing for `Andigilog aSC7621'... No > Probing for `National Semiconductor LM87'... No > Probing for `National Semiconductor LM93'... No > Probing for `Winbond W83781D'... No > Probing for `Winbond W83782D'... No > Probing for `Winbond W83792D'... No > Probing for `Winbond W83793R/G'... No > Probing for `Winbond W83791SD'... No > Probing for `Winbond W83627HF'... No > Probing for `Winbond W83627EHF'... No > Probing for `Winbond W83627DHG'... No > Probing for `Asus AS99127F (rev.1)'... No > Probing for `Asus AS99127F (rev.2)'... No > Probing for `Asus ASB100 Bach'... No > Probing for `Winbond W83L786NR/NG/R/G'... No > Probing for `Winbond W83L785TS-S'... No > Probing for `Analog Devices ADM9240'... No > Probing for `Dallas Semiconductor DS1780'... No > Probing for `National Semiconductor LM81'... No > Probing for `Analog Devices ADM1026'... No > Probing for `Analog Devices ADM1025'... No > Probing for `Analog Devices ADM1029'... No > Probing for `Analog Devices ADM1030'... No > Probing for `Analog Devices ADM1031'... No > Probing for `Analog Devices ADM1022'... No > Probing for `Texas Instruments THMC50'... No > Probing for `Analog Devices ADM1028'... No > Probing for `ITE IT8712F'... No > Probing for `SMSC DME1737'... No > Probing for `SMSC SCH5027D-NW'... Success! > (confidence 6, driver `dme1737') Works as advertised. The problem was that the lm85 driver was loaded prior to running sensors-detect. ...juerg > Probing for `Fintek F75373S/SG'... No > Probing for `Fintek F75375S/SP'... No > Probing for `Fintek F75387SG/RG'... No > Probing for `Analog Devices ADM1024'... No > Probing for `Winbond W83791D'... No > Client found at address 0x44 > Probing for `Maxim MAX6633/MAX6634/MAX6635'... No > Client found at address 0x50 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > (note: this is probably NOT a sensor chip!) > Client found at address 0x52 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > (note: this is probably NOT a sensor chip!) > > Some chips are also accessible through the ISA I/O ports. We have to > write to arbitrary I/O ports to probe them. This is usually safe though. > Yes, you do have ISA I/O ports even if you do not have any ISA slots! > Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No > Probing for `National Semiconductor LM78-J' at 0x290... No > Probing for `National Semiconductor LM79' at 0x290... No > Probing for `Winbond W83781D' at 0x290... No > Probing for `Winbond W83782D' at 0x290... No > Probing for `Silicon Integrated Systems SIS5595'... No > Probing for `VIA VT82C686 Integrated Sensors'... No > Probing for `VIA VT8231 Integrated Sensors'... No > Probing for `IPMI BMC KCS' at 0xca0... No > Probing for `IPMI BMC SMIC' at 0xca8... No > > Some Super I/O chips may also contain sensors. We have to write to > standard I/O ports to probe them. This is usually safe. > Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f > Trying family `National Semiconductor'... No > Trying family `SMSC'... Yes > Found `SMSC SCH5027D-NW Super IO' > (hardware monitoring capabilities accessible via SMBus only) > Probing for Super-I/O at 0x4e/0x4f > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... No > Trying family `ITE'... No > > Some CPUs or memory controllers may also contain embedded sensors. > Do you want to scan for them? (YES/no): AMD K8 thermal sensors... No > AMD K10 thermal sensors... No > Intel Core family thermal sensor... Success! > (driver `coretemp') > Intel AMB FB-DIMM thermal sensor... No > > Now follows a summary of the probes I have just done. > Just press ENTER to continue: > Driver `dme1737' (should be inserted): > Detects correctly: > * Bus `SMBus I801 adapter at 3000' > Busdriver `i2c-i801', I2C address 0x2e > Chip `SMSC SCH5027D-NW' (confidence: 6) > > Driver `coretemp' (should be inserted): > Detects correctly: > * Chip `Intel Core family thermal sensor' (confidence: 9) > > Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): To load everything that is needed, add this to one of the system > initialization scripts (e.g. /etc/rc.d/rc.local): > > #----cut here---- > # I2C adapter drivers > modprobe i2c-i801 > # Chip drivers > # Warning: the required module dme1737 is not currently installed > # on your system. For status of 2.6 kernel ports check > # http://www.lm-sensors.org/wiki/Devices. If driver is built > # into the kernel, or unavailable, comment out the following line. > modprobe dme1737 > # Warning: the required module coretemp is not currently installed > # on your system. For status of 2.6 kernel ports check > # http://www.lm-sensors.org/wiki/Devices. If driver is built > # into the kernel, or unavailable, comment out the following line. > modprobe coretemp > /usr/bin/sensors -s > #----cut here---- > > If you have some drivers built into your kernel, the list above will > contain too many modules. Skip the appropriate ones! You really > should try these commands right now to make sure everything is > working properly. Monitoring programs won't work until the needed > modules are loaded. > > >
