Hi
I have installed lm-sensors on a remote server as it has been crashing
every few days and the logs show no obvious OS / software issues.
I have got lm-sensors working I think ( after updating my kernel)
My questions are:
What is RD1 temp ?
Which is the true cpu temp ? Core1 from K8temp or CPU temp from dme1737.
I ran a kernel compiling loop to 'burn' the cpu a little and both rose
about 8?C.
But is either a true figure ? Why the 20? difference ?
Sorry I can't give exact info on motherboard model as I have no physical
access to the server. I will include some lspci output below.
(I have set some sensors to Ignore in sensors.conf as they showed 0)
Thanks for the software.
Lee
~# sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core1 Temp:
+42?C
dme1737-i2c-0-2e
Adapter: SMBus nForce2 adapter at 88c0
V3.3: +3.35 V (min = +0.00 V, max = +4.38 V)
V3.3stby: +3.31 V (min = +0.00 V, max = +4.38 V)
Vbat: +3.01 V (min = +0.00 V, max = +4.38 V)
RD1 Temp: +40?C (low = -127?C, high = +61?C)
Int Temp: +44?C (low = -127?C, high = +91?C)
CPU Temp: +60?C (low = -127?C, high = +86?C)
CPU_Fan: 1680 RPM (min = 0 RPM)
Fan3: 8557 RPM (min = 0 RPM)
ERROR: Can't get fan5 data!
ERROR: Can't get fan6 data!
CPU_PWM: 67 (enable = 2, freq = 25000 Hz)
Fan3_PWM: 67 (enable = 2, freq = 25000 Hz)
ERROR: Can't get pwm5 data!
ERROR: Can't get pwm6 data!
cpu0_vid: +1.350 V (VRM Version 2.4)
--------------------------------------------
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce 6150
LE] (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller
(rev f1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:14.0 Ethernet controller: nVidia Corporation MCP51 Ethernet
Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
------------------------------------------------
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
Subsystem: Fujitsu Siemens Computer GmbH Unknown device 10c6
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at 88c0 [size=64]
I/O ports at 8880 [size=64]
Capabilities: [44] Power Management version 2
