I am running Fedora 8 on a Gigabyte m56s-s3 board with an AMD X2 BE-2350. Running sensors gives me: # sensors k8temp-pci-00c3 Adapter: PCI adapter temp1: -9??C temp2: -20??C temp3: -18??C temp4: -14??C it8716-isa-0290 Adapter: ISA adapter VCore: +0.99 V (min = +0.00 V, max = +4.08 V) VDDR: +1.89 V (min = +0.00 V, max = +4.08 V) +3.3V: +3.30 V (min = +0.00 V, max = +4.08 V) +5V: +4.84 V (min = +0.00 V, max = +6.85 V) +12V: +11.97 V (min = +0.00 V, max = +16.32 V) in5: +3.18 V (min = +0.00 V, max = +4.08 V) in6: +0.10 V (min = +0.00 V, max = +4.08 V) 5VSB: +4.92 V (min = +0.00 V, max = +6.85 V) VBat: +3.07 V fan1: 805 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) temp1: +38??C (low = +127??C, high = +127??C) sensor = thermistor temp2: +35??C (low = +127??C, high = +127??C) sensor = thermistor temp3: +25??C (low = +127??C, high = +127??C) sensor = diode vid: +1.000 V (yes, throttled down) As you can see the k8temp info is slightly off-target. Is this a known issue? How could it be corrected? What are in5 and in6 on this board? What are temp2 and temp3? Thanks for your help. Kind regards, Udo
