Hi Joseph, > Hello Everyone, > Forgive the beginner question, as I also have limited experience in Linux > as well. I have a VMware esx server running 2.4.21-47.0.1.ELvmnix kernel. I > cannot recompile this kernel and add driver support to it. I suspect from > reading so far that this prevents me from running lm-sensors? > > > > If not, can someone point me to some documentation that might help me get > started with this kernel version or suggest a alternative approach? I really > need to monitor a series of fan speeds on an Asus P5B-VM motherboard. > > > > Thank you, > jlc I believe what you want to do is possible. You will need to figure out if it really is possible to run a guest OS and grant it access to the non-virtualized hardware. Then you can compile a guest OS with hwmon support and monitor the fan speeds. That kind of question is something I cannot answer for you. I suggest you join the gentoo forums and ask there (http://forums.gentoo.org) because they are responsive and helpful. You will still need to be persistent and patient (and as clear as possible). If you know of another forum you would rather use, by all means go ahead. >From my understanding, VMware is very capable and should be able to pass through I/O accesses to the "raw hardware". The overhead will be significant, but hwmon is not latency or bandwidth limited, so you should be fine. Perhaps, when you find an answer, if you would post a summary here, that would be appreciated. Good luck, David
