Hi I have an aopen XC cube EZ18 with an nforce2 based motherboard I am trying to get lm-sensors working, but am not getting the correct readings I have attached outputs of lspci -v, lspci -n, sensors-detect, dmidecode smartbatt and pca9540 don't seem to exist in my kernel sources (linux-2.6.22-gentoo-r8) w83627hf and max6650 do load without errors when I run sensors, I get what I have pasted below Note how no fan speeds are detected and temps are way too low (my ambient is about 28 C) In my bios, all speeds/temps seem to be picked up OK Regards Chris --------------------------------- w83627hf-isa-0290 Adapter: ISA adapter VCore 1: +1.55 V (min = +0.00 V, max = +4.08 V) VCore 2: +1.58 V (min = +0.00 V, max = +4.08 V) +3.3V: +3.31 V (min = +2.82 V, max = +3.79 V) +5V: +4.97 V (min = +0.08 V, max = +1.80 V) ALARM +12V: +11.86 V (min = +0.79 V, max = +8.33 V) ALARM -12V: -11.87 V (min = -4.14 V, max = -13.59 V) ALARM -5V: -5.05 V (min = +2.19 V, max = -2.43 V) ALARM V5SB: +5.46 V (min = +0.48 V, max = +0.38 V) ALARM VBat: +3.18 V (min = +0.13 V, max = +3.65 V) fan1: 0 RPM (min = 42187 RPM, div = 2) ALARM fan2: 0 RPM (min = 4856 RPM, div = 2) ALARM fan3: 0 RPM (min = 9926 RPM, div = 2) ALARM temp1: +17 C (high = +99 C, hyst = +11 C) sensor = thermistor temp2: +18.5 C (high = +70 C, hyst = +65 C) sensor = thermistor temp3: +19.0 C (high = +80 C, hyst = +80 C) sensor = thermistor vid: +0.000 V (VRM Version 9.0) alarms: beep_enable: Sound alarm disabled max6650-i2c-5-1b Adapter: NVIDIA i2c adapter fan1: configured 59531 RPM, actual 0 RPM. fan2: 0 RPM fan3: 0 RPM fan4: 0 RPM max6650-i2c-5-1f Adapter: NVIDIA i2c adapter fan1: configured 59531 RPM, actual 0 RPM. fan2: 0 RPM fan3: 0 RPM fan4: 0 RPM max6650-i2c-5-48 Adapter: NVIDIA i2c adapter fan1: configured 59531 RPM, actual 0 RPM. fan2: 0 RPM fan3: 0 RPM fan4: 0 RPM max6650-i2c-5-4b Adapter: NVIDIA i2c adapter fan1: configured 59531 RPM, actual 0 RPM. fan2: 0 RPM fan3: 0 RPM fan4: 0 RPM --------------------------------------- ---------------------+------------------------------------------------------- Chris Picton | PGP Key ID: 9D28A988 (wwwkeys.pgp.net) Technical Director | PGP Key Fingerprint: Tangent Systems | 2B46 29EA D530 79EC D9EA 3ED0 229D 6DD6 9D28 A988 011 447 8096 | chrisp at tangent.co.za | http://www.tangent.co.za/keys/chrisp.asc ---------------------+------------------------------------------------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: dmidecode.txt.bz2 Type: application/x-bzip Size: 2751 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20071119/23f5c39b/attachment.bin -------------- next part -------------- A non-text attachment was scrubbed... Name: lspcin.txt.bz2 Type: application/x-bzip Size: 219 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20071119/23f5c39b/attachment-0001.bin -------------- next part -------------- A non-text attachment was scrubbed... Name: lspciv.txt.bz2 Type: application/x-bzip Size: 1420 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20071119/23f5c39b/attachment-0002.bin -------------- next part -------------- A non-text attachment was scrubbed... Name: sensors-detect.txt.bz2 Type: application/x-bzip Size: 4141 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20071119/23f5c39b/attachment-0003.bin -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20071119/23f5c39b/attachment-0004.bin