Thanks for a fast answer. I supposed every motherboard has these sensors. Am I wrong ? The BIOS isn't able to show any other information. Is there possibility, that I haven't got any sensors on my motherboard ? chipset Mobile Intel 945GM Express Chipset processor Core Duo T2300 model Toshiba Satellite m100-154 probably distributed only across Europe Peter -- ************************************************** * ICQ 74097173 tel. 312 244 018 * * Irix a.s. Petr Bartel servis * * Fingerprint kl??e * 8DB8 3AB2 6865 45F4 3E84 4980 CCED 20B1 CC6B B649 ************************************************** Mon, Oct 22, 2007 at 05:40:21PM CEST, juergh at gmail.com napsal(a): > Hi Petr, > > > On 10/22/07, Petr Bartel <bartel at irix.cz> wrote: > > Good afternoon, > > I can't get any data from sensors (CPU fan, voltage....). > > Can you advise to me, what will I do ? > > > > lspci -vvv > > > > 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- > > Latency: 0 > > Capabilities: <access denied> > > > > 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA]) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin A routed to IRQ 17 > > Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=512K] > > Region 1: I/O ports at 1800 [size=8] > > Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] > > Region 3: Memory at d0300000 (32-bit, non-prefetchable) [size=256K] > > Capabilities: <access denied> > > > > 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Region 0: Memory at d0280000 (32-bit, non-prefetchable) [size=512K] > > Capabilities: <access denied> > > > > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 22 > > Region 0: Memory at d0340000 (64-bit, non-prefetchable) [size=16K] > > Capabilities: <access denied> > > > > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > > I/O behind bridge: 0000f000-00000fff > > Memory behind bridge: fff00000-000fffff > > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > > Capabilities: <access denied> > > > > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > > I/O behind bridge: 0000f000-00000fff > > Memory behind bridge: d0100000-d01fffff > > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > > Capabilities: <access denied> > > > > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI]) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin A routed to IRQ 20 > > Region 4: I/O ports at 1820 [size=32] > > > > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI]) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin B routed to IRQ 18 > > Region 4: I/O ports at 1840 [size=32] > > > > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI]) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin C routed to IRQ 21 > > Region 4: I/O ports at 1860 [size=32] > > > > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI]) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin D routed to IRQ 17 > > Region 4: I/O ports at 1880 [size=32] > > > > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin A routed to IRQ 20 > > Region 0: Memory at d0544000 (32-bit, non-prefetchable) [size=1K] > > Capabilities: <access denied> > > > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Bus: primary=00, secondary=05, subordinate=09, sec-latency=64 > > I/O behind bridge: 00002000-00002fff > > Memory behind bridge: d0000000-d00fffff > > Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff > > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > > Capabilities: <access denied> > > > > 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Capabilities: <access denied> > > > > 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02) (prog-if 80 [Master]) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin B routed to IRQ 18 > > Region 0: I/O ports at 01f0 [size=8] > > Region 1: I/O ports at 03f4 [size=1] > > Region 2: I/O ports at 0170 [size=8] > > Region 3: I/O ports at 0374 [size=1] > > Region 4: I/O ports at 18b0 [size=16] > > Capabilities: <access denied> > > > > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Interrupt: pin B routed to IRQ 18 > > Region 4: I/O ports at 18c0 [size=32] > > > > 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) > > Subsystem: Intel Corporation Unknown device 1041 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 16 > > Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=4K] > > Capabilities: <access denied> > > > > 05:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 168, Cache Line Size: 128 bytes > > Interrupt: pin A routed to IRQ 17 > > Region 0: Memory at d0004000 (32-bit, non-prefetchable) [size=4K] > > Bus: primary=05, secondary=06, subordinate=09, sec-latency=176 > > Memory window 0: 50000000-53fff000 (prefetchable) > > Memory window 1: 54000000-57fff000 > > I/O window 0: 00002400-000024ff > > I/O window 1: 00002800-000028ff > > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ > > 16-bit legacy interface ports at 0001 > > > > 05:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI]) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes > > Interrupt: pin B routed to IRQ 16 > > Region 0: Memory at d0007000 (32-bit, non-prefetchable) [size=2K] > > Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=16K] > > Capabilities: <access denied> > > > > 05:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes > > Interrupt: pin C routed to IRQ 21 > > Region 0: Memory at d0005000 (32-bit, non-prefetchable) [size=4K] > > Capabilities: <access denied> > > > > 05:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller (prog-if 01) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes > > Interrupt: pin D routed to IRQ 18 > > Region 0: Memory at d0007800 (32-bit, non-prefetchable) [size=256] > > Capabilities: <access denied> > > > > 05:08.0 Ethernet controller: Intel Corporation PRO/100 VM Network Connection (rev 02) > > Subsystem: Toshiba America Info Systems Unknown device ff00 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 19 > > Region 0: Memory at d0006000 (32-bit, non-prefetchable) [size=4K] > > Region 1: I/O ports at 2000 [size=64] > > Capabilities: <access denied> > > > > > > sensors-detect > > > > # sensors-detect revision 4609 (2007-07-14 09:28:39 -0700) > > > > This program will help you determine which kernel modules you need > > to load to use lm_sensors most effectively. It is generally safe > > and recommended to accept the default answers to all questions, > > unless you know what you're doing. > > > > We can start with probing for (PCI) I2C or SMBus adapters. > > Do you want to probe now? (YES/no): Probing for PCI bus adapters... > > Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7 > > > > We will now try to load each adapter module in turn. > > Module `i2c-i801' already loaded. > > If you have undetectable or unsupported adapters, you can have them > > scanned by manually loading the modules before running this script. > > > > We are now going to do the I2C/SMBus adapter probings. Some chips may > > be double detected; we choose the one with the highest confidence > > value in that case. > > If you found that the adapter hung after probing a certain address, > > you can specify that address to remain unprobed. > > > > Next adapter: SMBus I801 adapter at 18c0 (i2c-0) > > Do you want to scan it? (YES/no/selectively): Client found at address 0x44 > > Probing for `Maxim MAX6633/MAX6634/MAX6635'... No > > Client found at address 0x50 > > Probing for `Analog Devices ADM1033'... No > > Probing for `Analog Devices ADM1034'... No > > Probing for `SPD EEPROM'... Yes > > (confidence 8, not a hardware monitoring chip) > > Probing for `EDID EEPROM'... No > > Client found at address 0x52 > > Probing for `Analog Devices ADM1033'... No > > Probing for `Analog Devices ADM1034'... No > > Probing for `SPD EEPROM'... Yes > > (confidence 8, not a hardware monitoring chip) > > Probing for `EDID EEPROM'... No > > > > Some chips are also accessible through the ISA I/O ports. We have to > > write to arbitrary I/O ports to probe them. This is usually safe though. > > Yes, you do have ISA I/O ports even if you do not have any ISA slots! > > Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No > > Probing for `National Semiconductor LM78-J' at 0x290... No > > Probing for `National Semiconductor LM79' at 0x290... No > > Probing for `Winbond W83781D' at 0x290... No > > Probing for `Winbond W83782D' at 0x290... No > > Probing for `Silicon Integrated Systems SIS5595'... No > > Probing for `VIA VT82C686 Integrated Sensors'... No > > Probing for `VIA VT8231 Integrated Sensors'... No > > Probing for `IPMI BMC KCS' at 0xca0... No > > Probing for `IPMI BMC SMIC' at 0xca8... No > > > > Some Super I/O chips may also contain sensors. We have to write to > > standard I/O ports to probe them. This is usually safe. > > Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f > > Trying family `National Semiconductor'... No > > Trying family `SMSC'... No > > Trying family `VIA/Winbond/Fintek'... No > > Trying family `ITE'... No > > Probing for Super-I/O at 0x4e/0x4f > > Trying family `National Semiconductor'... No > > Trying family `SMSC'... No > > Trying family `VIA/Winbond/Fintek'... No > > Trying family `ITE'... No > > > > Some CPUs or memory controllers may also contain embedded sensors. > > Do you want to scan for them? (YES/no): AMD K8 thermal sensors... No > > Intel Core family thermal sensor... Success! > > (driver `coretemp') > > Intel AMB FB-DIMM thermal sensor... No > > > > Now follows a summary of the probes I have just done. > > Just press ENTER to continue: > > Driver `coretemp' (should be inserted): > > Detects correctly: > > * Chip `Intel Core family thermal sensor' (confidence: 9) > > > > I will now generate the commands needed to load the required modules. > > Just press ENTER to continue: > > To make the sensors modules behave correctly, add these lines to > > /etc/modules: > > > > #----cut here---- > > # Chip drivers > > coretemp > > #----cut here---- > > > > Do you want to add these lines to /etc/modules automatically? (yes/NO) > > > > lsmod > > > > Module Size Used by > > i2c_dev 8196 0 > > i915 25216 2 > > drm 83348 3 i915 > > tun 11776 1 > > af_packet 23176 2 > > parport_pc 36260 0 > > ppdev 9732 0 > > parport 37448 2 parport_pc,ppdev > > ipv6 265188 14 > > dm_snapshot 18984 0 > > dm_mirror 24832 0 > > dm_mod 59200 2 dm_snapshot,dm_mirror > > coretemp 7808 0 > > tifm_sd 12168 0 > > ipw3945 198176 0 > > ieee80211 35656 1 ipw3945 > > ieee80211_crypt 6400 1 ieee80211 > > snd_hda_intel 277532 1 > > snd_pcm_oss 43680 0 > > snd_pcm 80388 2 snd_hda_intel,snd_pcm_oss > > snd_mixer_oss 17280 1 snd_pcm_oss > > snd_seq_dummy 4100 0 > > snd_seq_oss 33152 0 > > snd_seq_midi 8736 0 > > snd_rawmidi 24992 1 snd_seq_midi > > snd_seq_midi_event 7680 2 snd_seq_oss,snd_seq_midi > > joydev 10688 0 > > snd_seq 53072 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > > snd_timer 23940 2 snd_pcm,snd_seq > > snd_seq_device 8588 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > > sdhci 18444 0 > > shpchp 33812 0 > > rtc 13592 0 > > tifm_7xx1 8192 0 > > i2c_i801 9360 0 > > ehci_hcd 34700 0 > > uhci_hcd 25868 0 > > intel_agp 24724 1 > > mmc_core 29444 2 tifm_sd,sdhci > > tsdev 8768 0 > > ohci1394 32944 0 > > ieee1394 94264 1 ohci1394 > > tifm_core 10756 2 tifm_sd,tifm_7xx1 > > pci_hotplug 31776 1 shpchp > > e100 36620 0 > > mii 5760 1 e100 > > i2c_core 25600 2 i2c_dev,i2c_i801 > > evdev 10624 0 > > psmouse 39568 0 > > agpgart 34252 3 drm,intel_agp > > usbcore 142212 3 ehci_hcd,uhci_hcd > > snd 54628 11 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > > soundcore 8672 1 snd > > snd_page_alloc 10632 2 snd_hda_intel,snd_pcm > > unix 28976 88 > > > > sensors > > > > coretemp-isa-0000 > > Adapter: ISA adapter > > Core 0: +16?C (high = +100?C) > > > > coretemp-isa-0001 > > Adapter: ISA adapter > > Core 1: +16?C (high = +100?C) > > > > No others data :( > > What makes you think your machine can provide any other information > than the core temp? Does the BIOS show any temperature/voltage > information? What is the brand and model of your machine and > motherboard? > > ...juerg > > > > Thanks a lot for your support > > > > Your sincerely > > Petr Bartel > > > > _______________________________________________ > > lm-sensors mailing list > > lm-sensors at lm-sensors.org > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > > > > > ________ Information from NOD32 ________ > This message was checked by NOD32 Antivirus System for Linux Mail Servers. > part000.txt - is OK > http://www.eset.com
