Hi Keith, On 10/16/07, KEITH ROMBERG <k_romberg at msn.com> wrote: > Hey juerg, > > Here is the output you wanted. > > Thanks, > Keith > > ############################################################# > > sensors-detect output: > > # sensors-detect revision 4171 (2006-09-24 03:37:01 -0700) Ok that is *really* old! Try the latest SVN version. > This program will help you determine which kernel modules you need > to load to use lm_sensors most effectively. It is generally safe > and recommended to accept the default answers to all questions, > unless you know what you're doing. > > We can start with probing for (PCI) I2C or SMBus adapters. > Do you want to probe now? (YES/no): > Probing for PCI bus adapters... > Sorry, no known PCI bus adapters found. That's the reason you can't see the LMs. No SMBus adapter is found. > We will now try to load each adapter module in turn. > If you have undetectable or unsupported adapters, you can have them > scanned by manually loading the modules before running this script. > > We are now going to do the I2C/SMBus adapter probings. Some chips may > be double detected; we choose the one with the highest confidence > value in that case. > If you found that the adapter hung after probing a certain address, > you can specify that address to remain unprobed. > > Some chips are also accessible through the ISA I/O ports. We have to > write to arbitrary I/O ports to probe them. This is usually safe though. > Yes, you do have ISA I/O ports even if you do not have any ISA slots! > Do you want to scan the ISA I/O ports? (YES/no): > Probing for `National Semiconductor LM78' at 0x290... No > Probing for `National Semiconductor LM78-J' at 0x290... No > Probing for `National Semiconductor LM79' at 0x290... No > Probing for `Winbond W83781D' at 0x290... No > Probing for `Winbond W83782D' at 0x290... No > Probing for `Winbond W83627HF' at 0x290... No > Probing for `Silicon Integrated Systems SIS5595'... No > Probing for `VIA VT82C686 Integrated Sensors'... No > Probing for `VIA VT8231 Integrated Sensors'... No > Probing for `AMD K8 thermal sensors'... No > Probing for `IPMI BMC KCS' at 0xca0... No > Probing for `IPMI BMC SMIC' at 0xca8... No > > Some Super I/O chips may also contain sensors. We have to write to > standard I/O ports to probe them. This is usually safe. > Do you want to scan for Super I/O sensors? (YES/no): > Probing for Super-I/O at 0x2e/0x2f > Trying family `ITE'... Yes > Found unknown chip with ID 0x5d00 > Trying family `National Semiconductor'... No > Trying family `SMSC'... Yes > Found unknown chip with ID 0x5d00 > Trying family `VIA/Winbond/Fintek'... No > Probing for Super-I/O at 0x4e/0x4f > Trying family `ITE'... No > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... No Hmm... According to my information, device ID 5d is a LPC47b357 for which no datasheet is available. Speedfan however identifies it as a 47m967... I can ask SMSC for a datasheet if you care, maybe the chip is compatible to one that is already supported. > Sorry, no sensors were detected. > Either your sensors are not supported, or they are connected to an > I2C or SMBus adapter that is not supported. See doc/FAQ, > doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ > (FAQ #4.24.3) for further information. > If you find out what chips are on your board, check > http://www.lm-sensors.org/wiki/Devices for driver status. > > ############################################################ > > [root at scatha ~]# lspci -nn -vv > 00:00.0 0600: 8086:2531 (rev 04) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR+ > Latency: 0 > Region 0: Memory at c8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 2.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ > Rate=x4 > > 00:01.0 0604: 8086:2532 (rev 04) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: fea00000-febfffff > Prefetchable memory behind bridge: d0000000-efffffff > Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- > > 00:02.0 0604: 8086:2533 (rev 04) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 > Memory behind bridge: cf600000-cf6fffff > Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > 00:1e.0 0604: 8086:244e (rev 04) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 > I/O behind bridge: 00001000-00001fff > Memory behind bridge: cf700000-cfffffff > Prefetchable memory behind bridge: 50000000-501fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > 00:1f.0 0601: 8086:2440 (rev 04) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 00:1f.1 0101: 8086:244b (rev 04) (prog-if 80) > Subsystem: 0e11:0078 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) > [disabled] [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) > [disabled] [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) > [disabled] [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) > [disabled] [size=1] > Region 4: I/O ports at 3040 [size=16] > > 00:1f.2 0c03: 8086:2442 (rev 04) > Subsystem: 0e11:0078 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin D routed to IRQ 19 > Region 4: I/O ports at 3000 [size=32] Here's where the SMBus controller should show up (00:1f.3). It's hidden. You can try to unhide it with the unhide_ICH_SMBus script in the /prog/hotplug directory of the lm-sensors package and the run sensors-detect again. Be aware that there might be a reason why the BIOS is hiding it! So use at your own risk and with caution. ...juerg > 00:1f.4 0c03: 8086:2444 (rev 04) > Subsystem: 0e11:0078 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 23 > Region 4: I/O ports at 3020 [size=32] > > 01:00.0 0300: 1002:4153 > Subsystem: 1002:0402 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 255 (2000ns min), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] > Region 1: I/O ports at 2000 [size=256] > Region 2: Memory at fea00000 (32-bit, non-prefetchable) [size=64K] > [virtual] Expansion ROM at fea20000 [disabled] [size=128K] > Capabilities: [58] AGP version 2.0 > Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ > Rate=x4 > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.1 0380: 1002:4173 > Subsystem: 1002:0403 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 66 (2000ns min), Cache Line Size: 32 bytes > Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] > Region 1: Memory at feb00000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 02:1f.0 0604: 8086:1360 (rev 03) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 > Memory behind bridge: cf600000-cf6fffff > Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > 03:00.0 0800: 8086:1161 (rev 01) (prog-if 20) > Subsystem: 8086:1161 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Region 0: Memory at cf600000 (32-bit, non-prefetchable) [size=4K] > > 04:06.0 0401: 1274:1371 (rev 09) > Subsystem: 0e11:0025 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (3000ns min, 32000ns max) > Interrupt: pin A routed to IRQ 20 > Region 0: I/O ports at 1800 [size=64] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 04:07.0 0200: 8086:1229 (rev 08) > Subsystem: 0e11:3006 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at cf700000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at 1840 [size=64] > Region 2: Memory at cf800000 (32-bit, non-prefetchable) [size=1M] > [virtual] Expansion ROM at 50000000 [disabled] [size=1M] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 04:09.0 0200: 8086:100e (rev 02) > Subsystem: 8086:002e > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (63750ns min), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at cf900000 (32-bit, non-prefetchable) [size=128K] > Region 1: Memory at cfa00000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at 1880 [size=64] > [virtual] Expansion ROM at 50100000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device > Command: DPERE- ERO+ RBC=512 OST=1 > Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple > DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- > Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > > 04:0b.0 0c03: 1033:0035 (rev 43) (prog-if 10) > Subsystem: 14db:14db > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at cfb00000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 04:0b.1 0c03: 1033:0035 (rev 43) (prog-if 10) > Subsystem: 14db:14db > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 16 > Region 0: Memory at cfc00000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 04:0b.2 0c03: 1033:00e0 (rev 04) (prog-if 20) > Subsystem: 14db:00e0 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 128 bytes > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at cfd00000 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 04:0d.0 0100: 9005:00cf (rev 01) > Subsystem: 0e11:003a > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 22 > BIST result: 00 > Region 0: I/O ports at 1000 [disabled] [size=256] > Region 1: Memory at cfe00000 (64-bit, non-prefetchable) [size=4K] > [virtual] Expansion ROM at 50120000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 04:0d.1 0100: 9005:00cf (rev 01) > Subsystem: 0e11:003a > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 16 > BIST result: 00 > Region 0: I/O ports at 1400 [disabled] [size=256] > Region 1: Memory at cff00000 (64-bit, non-prefetchable) [size=4K] > [virtual] Expansion ROM at 50140000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > ############################################################ > > [root at scatha ~]# isadump -k 0x55 0x2e 0x2f 0xa > WARNING! Running this program can cause system crashes, data loss and worse! > I will probe address register 0x2e and data register 0x2f. > Probing bank 10 using bank register 0x07. > Continue? [Y/n] y > 0 1 2 3 4 5 6 7 8 9 a b c d e f > 00: 00 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 5d 00 38 00 04 11 2e 00 00 00 00 00 00 00 00 00 > 30: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 ff ff ff ff ff ff > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > > > >The LMs are dependent on the 82801BA. Maybe the SMBus is hidden on > >your machine (but then again it shows up under windows). The LPC47m967 > >is independent. > > > >Can you post the full output of sensors-detect and also run the > >following commands (as root): > >lspci -nn -vv > >isadump -k 0x55 0x2e 0x2f 0xa > > > >...juerg > > > > > > > > _______________________________________________ > lm-sensors mailing list > lm-sensors at lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors >
