Hi. I just downloaded and installed lm-sensors 3.0.0. I get some error messages in sensor3 output. kernel 2.6.21.6 modules: k8temp, it87 This the output (at the end of errors you see the temperature data): stefano at macondo:~$ sensors3 Error: Line 272: Parse error in chip name Error: Line 277: Label statement before first chip statement Error: Line 278: Label statement before first chip statement Error: Line 279: Label statement before first chip statement Error: Line 280: Label statement before first chip statement Error: Line 281: Label statement before first chip statement Error: Line 282: Label statement before first chip statement Error: Line 283: Label statement before first chip statement Error: Line 316: Compute statement before first chip statement Error: Line 317: Compute statement before first chip statement Error: Line 318: Compute statement before first chip statement Error: Line 319: Compute statement before first chip statement Error: Line 323: Set statement before first chip statement Error: Line 324: Set statement before first chip statement Error: Line 325: Set statement before first chip statement Error: Line 326: Set statement before first chip statement Error: Line 327: Set statement before first chip statement Error: Line 328: Set statement before first chip statement Error: Line 329: Set statement before first chip statement Error: Line 330: Set statement before first chip statement Error: Line 331: Set statement before first chip statement Error: Line 332: Set statement before first chip statement Error: Line 333: Set statement before first chip statement Error: Line 334: Set statement before first chip statement Error: Line 335: Set statement before first chip statement Error: Line 336: Set statement before first chip statement Error: Line 1039: Parse error in chip name Error: Line 1060: Parse error in chip name Error: Line 1070: Parse error in chip name Error: Line 1080: Parse error in chip name Error: Line 1090: Parse error in chip name k8temp-pci-00c3 Adapter: PCI adapter temp1: +31.0?C temp3: +31.0?C it8716-isa-0290 Adapter: ISA adapter in0: +1.12 V (min = +0.00 V, max = +4.08 V) in1: +1.86 V (min = +0.00 V, max = +4.08 V) in2: +3.36 V (min = +0.00 V, max = +4.08 V) in3: +2.93 V (min = +0.00 V, max = +4.08 V) in4: +2.98 V (min = +0.00 V, max = +4.08 V) in5: +3.23 V (min = +0.00 V, max = +4.08 V) in6: +1.12 V (min = +0.00 V, max = +4.08 V) in7: +2.96 V (min = +0.00 V, max = +4.08 V) in8: +3.04 V fan1: 1577 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) temp1: +37.0?C (low = +127.0?C, high = +127.0?C) sensor = transistor temp2: +32.0?C (low = +127.0?C, high = +127.0?C) sensor = transistor temp3: +28.0?C (low = +127.0?C, high = +127.0?C) sensor = thermal diode cpu0_vid: +1.100 V Also, sensor-detect suggests 'sensor' instead of 'sensor3'. # sleep 2 # optional /usr/local/bin/sensors -s # recommended #----cut here---- Thanks. Stefano
