So, which version is needed to run the dme1737 on the asus board (Which I think doesnt have the SCH3114 Super I/O chip)? debian testing and unstable both have 2.10.4 at the moment, which is the same version as http://www.lm-sensors.org/wiki/Download. Will it be enough to install this version? By the way: Does anyone know of backports to etch? Juergen > -----Urspr?ngliche Nachricht----- > Von: Kushal Koolwal <kushalkoolwal at hotmail.com> > Gesendet: 28.08.07 00:56:24 > An: "Juergen. Bausa" <juergen.bausa at web.de> > CC: <lm-sensors at lm-sensors.org> > Betreff: RE: dme1737 module Hello, > > Actually I have tried the newest version of lm-sensors on Debian sid and dme1737 does not show any output for my SCH3114 Super I/O chip. > > I have also opened a ticket for the same last week. > > Here is the URL of the ticket: > http://www.lm-sensors.org/ticket/2243 > > Thanks > > Kushal Koolwal > > > Date: Mon, 27 Aug 2007 14:26:16 -0700 > > From: juergh at gmail.com > > To: Juergen.Bausa at web.de > > CC: lm-sensors at lm-sensors.org > > Subject: Re: dme1737 module > > > > Hi Juergen, > > > > > > > Juerg Haefliger <juergh <at> gmail.com> writes: > > > > > > > > > > > > I own a barebone made by asus which needs the dme1737 module for > > > > > lm-sensors to work correctly. Since it had been included in kernel > > > > > 2.6.23 and I am running 2.6.18 (from > > > > > debian etch) I was wondering if there is a stand alone version > > > > > of the module, that I could > > > > > compile for my kernel? Is there any way to use it with 2.6.18? > > > > > > > > Copy the file dme1737.c from the 2.6.23 kernel to a temp directory and > > > > create a Makefile in the same directory that contains the following > > > > lines: > > > > > > > > obj-m := dme1737.o > > > > all: > > > > make -C /lib/modules/`uname -r`/build M=$(PWD) modules > > > > > > > > Then run 'make' which will compile the module. You also need to have > > > > the kernel headers installed to be able to compile. > > > > Additionally, you will also need the latest 'lm-sensors' package > > > > (2.10.4 ) or the dme1737 will not be recognized. > > > > > > > > > > Thanks a lot, the module seems to work fine. I used the newest sensors-detect > > > and it found out the modules I have to use. However, the output of sensors > > > is quite short: > > > > > > jba at lisa:~$ sensors > > > k8temp-pci-00c3 > > > Adapter: PCI adapter > > > Core0 Temp: > > > -1?C > > > Core0 Temp: > > > +1?C > > > Core1 Temp: > > > +6?C > > > Core1 Temp: > > > +6?C > > > > > > dme1737-i2c-0-2e > > > Adapter: SMBus nForce2 adapter at 4c00 > > > > > > k8temp values are wrong, but that is another problem. But why doent > > > dme1737 display anything? Is it because of the older lm-sensors version in > > > debian (2.10.1-3). Or will it be sufficiant to update the config file? > > > If possible I would like to keep the etch version of lm-sensors. > > > > You need a newer lm-sensors. 2.10.1 doesn't know about the dme1737. > > Just updating the config file is not enough. > > > > ...juerg > > > > > > > Juergen > > > > > > > > > _______________________________________________ > > > lm-sensors mailing list > > > lm-sensors at lm-sensors.org > > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > > > > _______________________________________________ > > lm-sensors mailing list > > lm-sensors at lm-sensors.org > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > > > ----------------------------------------------------------------- > Get news, entertainment and everything you care about at Live.com. Check it out! _____________________________________________________________________ Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/?mc=100071&distributionid=000000000066
