Note that this machine is running a modified version of the FC7 2.6.22
kernel. One of the modifications involved making the ipmisensors module
run under Linux 2.6.22 (properly)!
[lm_sensors 2.10.3 before patch]
[root at noakes redhat]# sensors
bmc-isa-0000
Adapter: ISA adapter
CMOS Battery:
+3.08 V (min = +2.64 V, max = +0.00 V)
Fan 1: 3525 RPM (min = 675 RPM)
Fan 2A: 7650 RPM (min = 675 RPM)
Fan 2B: 5400 RPM (min = 675 RPM)
Fan 3A: 7650 RPM (min = 675 RPM)
Fan 3B: 5550 RPM (min = 675 RPM)
Fan 4A: 7425 RPM (min = 675 RPM)
Fan 4B: 5400 RPM (min = 675 RPM)
Fan 5A: 7575 RPM (min = 675 RPM)
Fan 5B: 5475 RPM (min = 675 RPM)
Temp: +3.9?C (high = +9?C, hyst = -13?C) *** WRONG ***
Temp: +45.0?C (high = +9?C, hyst = -13?C)
Planar Temp:
+33.0?C (high = +8?C, hyst = -13?C)
VRD 0 Temp:
+26.0?C (high = +7?C, hyst = -13?C)
VRD 1 Temp:
+28.0?C (high = +7?C, hyst = -13?C)
[After patch applied and RPM rebuilt]
[root at noakes redhat]# sensors
bmc-isa-0000
Adapter: ISA adapter
CMOS Battery:
+3.08 V (min = +2.64 V, max = +0.00 V)
Fan 1: 3525 RPM (min = 675 RPM)
Fan 2A: 7650 RPM (min = 675 RPM)
Fan 2B: 5400 RPM (min = 675 RPM)
Fan 3A: 7725 RPM (min = 675 RPM)
Fan 3B: 5550 RPM (min = 675 RPM)
Fan 4A: 7425 RPM (min = 675 RPM)
Fan 4B: 5475 RPM (min = 675 RPM)
Fan 5A: 7575 RPM (min = 675 RPM)
Fan 5B: 5475 RPM (min = 675 RPM)
Temp: +38.0?C (high = +9?C, hyst = -13?C)
Temp: +43.0?C (high = +9?C, hyst = -13?C)
Planar Temp:
+32.0?C (high = +8?C, hyst = -13?C)
VRD 0 Temp:
+26.0?C (high = +7?C, hyst = -13?C)
VRD 1 Temp:
+28.0?C (high = +7?C, hyst = -13?C)
and the output from ipmitool confirming that sensors is displaying the
correct values-
[root at noakes lm_sensors-2.10.3]# ipmitool -I open sdr elist
Temp | 01h | ok | 3.2 | 38 degrees C
Temp | 02h | ok | 3.3 | 42 degrees C
Planar Temp | 04h | ok | 7.1 | 32 degrees C
VRD 0 Temp | 05h | ok | 7.1 | 26 degrees C
VRD 1 Temp | 06h | ok | 7.1 | 27 degrees C
CMOS Battery | 10h | ok | 7.1 | 3.08 Volts
VCORE | 11h | ok | 3.2 | State Deasserted
VCORE | 12h | ok | 3.3 | State Deasserted
PROC VTT | 13h | ok | 7.1 | State Deasserted
1.5V PG | 14h | ok | 7.1 | State Deasserted
1.8V PG | 15h | ok | 7.1 | State Deasserted
Presence | 20h | ok | 3.2 | Present
Presence | 21h | ok | 3.3 | Present
Fan 1 | 30h | ok | 7.1 | 3525 RPM
Fan 2A | 31h | ok | 7.1 | 7650 RPM
Fan 2B | 32h | ok | 7.1 | 5400 RPM
Fan 3A | 33h | ok | 7.1 | 7725 RPM
Fan 3B | 34h | ok | 7.1 | 5550 RPM
Fan 4A | 35h | ok | 7.1 | 7425 RPM
Fan 4B | 36h | ok | 7.1 | 5475 RPM
Fan 5A | 37h | ok | 7.1 | 7500 RPM
Fan 5B | 38h | ok | 7.1 | 5475 RPM
Status | 40h | ok | 3.2 | Presence detected
Status | 41h | ok | 3.3 | Presence detected
VRM | 44h | ok | 3.2 | Presence detected
VRM | 45h | ok | 3.3 | Presence detected
OS Watchdog | 50h | ok | 7.1 |
SEL | 51h | ns | 7.1 | Disabled
Intrusion | 52h | ok | 7.1 |
Fan Redundancy | 54h | ok | 7.1 | Fully Redundant
ECC Corr Err | 01h | ok | 34.6 | Presence Detected, Configuration Error
ECC Uncorr Err | 02h | ok | 34.6 | Presence Detected, Configuration Error
I/O Channel Chk | 03h | ns | 34.6 | Disabled
PCI Parity Err | 04h | ok | 34.6 | EISA failsafe timeout, Bus
Correctable error
PCI System Err | 05h | ok | 34.6 | EISA failsafe timeout, Bus
Correctable error
SBE Log Disabled | 06h | ok | 34.6 |
Logging Disabled | 07h | ns | 34.6 | Disabled
Unknown | 08h | ns | 34.6 | Disabled
PROC Protocol | 0Ah | ns | 34.6 | Disabled
PROC Bus PERR | 0Bh | ns | 34.6 | Disabled
PROC Init Err | 0Ch | ns | 34.6 | Disabled
PROC Machine Chk | 0Dh | ns | 34.6 | Disabled
Memory Spared | 11h | ok | 34.6 | Fully Redundant
Memory Mirrored | 12h | ok | 34.6 | Fully Redundant
Memory RAID | 13h | ok | 34.6 | Fully Redundant
Memory Added | 14h | ok | 34.6 | Correctable ECC
Memory Removed | 15h | ok | 34.6 | Correctable ECC
PCIE Fatal Err | 18h | ns | 34.6 | Disabled
Chipset Err | 19h | ns | 34.6 | Disabled
Err Reg Pointer | 1Ah | ns | 34.6 | No Reading
The attached patch files fix this problem for the FC7 version of
lm_sensors 2.10.3 !
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lm_sensors-2.10.3-bmc-temp1-fixup.patch
Url: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20070806/f10bb101/attachment.pl
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lm_sensors.spec.patch
Url: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20070806/f10bb101/attachment-0001.pl
