I wrote: > Now that I booted from 2.6.22-rc5 to 2.6.23-rc2 I noticed that ksensors > displayed 1/16 of the actual speed of the CPU fan (correct is ca. 1400 > RPM under light load) and 0 for the case fan (correct is ca. 480 RPM > under light load). > > I reverted patch > hwmon/w83627ehf: No need to initialize fan_min > and the behaviour changed as follows: ksensors displays the correct CPU > fan speed when loaded for the first time after the w83627ehf was loaded, > then drops to 1/16th the next time it refreshes the display. (I > configured 30s update interval in ksensors.) But the case fan's speed > is now correctly displayed all the time. Ksensors' fan speed > multipliers are configured as 1. ... > Booting back into 2.6.22-rc5 (which seems identical with 2.6.22 as far > as w83627ehf is concerned) brings back the correct fan speeds. PS: The actual behavior under 2.6.22-rc5 is that the CPU fan speed is displayed correctly from the start, while the case fan speed is initially shown as 0 but jumps to the correct speed after ksensors' first display update. -- Stefan Richter -=====-=-=== =--- --=-= http://arcgraph.de/sr/
