Hi Roger,
On Mon, 11 Jun 2007 22:51:05 +0100, Roger Lucas wrote:
> Attached is the vt8231 patch against the latest stable kernel (2.6.21.5).
>
> It works on my VIA Epia motherboard under the 2.6.16.20 kernel. It
> has the release resource problem mentioned in the earlier mail but this
> should be resolved with your patch (although I haven't updated to the
> latest kernel and applied your patch to explicitly test this).
Excellent work, it was almost perfect! I simply updated the dependencies
in Kconfig, fixed one use of s_bridge before it was defined, and fixed
indentation at places to make the patch smaller. Here is the version I
came up with. Mark, please apply. Roger, please test again just in case
- but I changed so little from your patch that I could hardly have
broken anything.
* * * * *
From: Roger Lucas <roger at planbit.co.uk>
Subject: hwmon/vt8231: Convert to a platform driver
Convert the vt8231 driver from the nonsensical i2c-isa hack to a
regular platform driver.
Signed-off-by: Roger Lucas <roger at planbit.co.uk>
Signed-off-by: Jean Delvare <khali at linux-fr.org>
---
drivers/hwmon/Kconfig | 3
drivers/hwmon/vt8231.c | 317 ++++++++++++++++++++++++++----------------------
2 files changed, 174 insertions(+), 146 deletions(-)
--- linux-2.6.22-rc4.orig/drivers/hwmon/vt8231.c 2007-04-26 18:29:52.000000000 +0200
+++ linux-2.6.22-rc4/drivers/hwmon/vt8231.c 2007-06-12 20:47:28.000000000 +0200
@@ -29,8 +29,7 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
@@ -42,10 +41,7 @@ static int force_addr;
module_param(force_addr, int, 0);
MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors");
-/* Device address
- Note that we can't determine the ISA address until we have initialized
- our module */
-static unsigned short isa_address;
+static struct platform_device *pdev;
#define VT8231_EXTENT 0x80
#define VT8231_BASE_REG 0x70
@@ -148,7 +144,9 @@ static inline u8 FAN_TO_REG(long rpm, in
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : 1310720 / ((val) * (div)))
struct vt8231_data {
- struct i2c_client client;
+ unsigned short addr;
+ const char *name;
+
struct mutex update_lock;
struct class_device *class_dev;
char valid; /* !=0 if following fields are valid */
@@ -168,20 +166,20 @@ struct vt8231_data {
};
static struct pci_dev *s_bridge;
-static int vt8231_detect(struct i2c_adapter *adapter);
-static int vt8231_detach_client(struct i2c_client *client);
+static int vt8231_probe(struct platform_device *pdev);
+static int vt8231_remove(struct platform_device *pdev);
static struct vt8231_data *vt8231_update_device(struct device *dev);
-static void vt8231_init_client(struct i2c_client *client);
+static void vt8231_init_device(struct vt8231_data *data);
-static inline int vt8231_read_value(struct i2c_client *client, u8 reg)
+static inline int vt8231_read_value(struct vt8231_data *data, u8 reg)
{
- return inb_p(client->addr + reg);
+ return inb_p(data->addr + reg);
}
-static inline void vt8231_write_value(struct i2c_client *client, u8 reg,
+static inline void vt8231_write_value(struct vt8231_data *data, u8 reg,
u8 value)
{
- outb_p(value, client->addr + reg);
+ outb_p(value, data->addr + reg);
}
/* following are the sysfs callback functions */
@@ -220,13 +218,12 @@ static ssize_t set_in_min(struct device
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
- vt8231_write_value(client, regvoltmin[nr], data->in_min[nr]);
+ vt8231_write_value(data, regvoltmin[nr], data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -236,13 +233,12 @@ static ssize_t set_in_max(struct device
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
- vt8231_write_value(client, regvoltmax[nr], data->in_max[nr]);
+ vt8231_write_value(data, regvoltmax[nr], data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -278,14 +274,13 @@ static ssize_t show_in5_max(struct devic
static ssize_t set_in5_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
0, 255);
- vt8231_write_value(client, regvoltmin[5], data->in_min[5]);
+ vt8231_write_value(data, regvoltmin[5], data->in_min[5]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -293,14 +288,13 @@ static ssize_t set_in5_min(struct device
static ssize_t set_in5_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
0, 255);
- vt8231_write_value(client, regvoltmax[5], data->in_max[5]);
+ vt8231_write_value(data, regvoltmax[5], data->in_max[5]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -348,26 +342,24 @@ static ssize_t show_temp0_min(struct dev
static ssize_t set_temp0_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_max[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
- vt8231_write_value(client, regtempmax[0], data->temp_max[0]);
+ vt8231_write_value(data, regtempmax[0], data->temp_max[0]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp0_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_min[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
- vt8231_write_value(client, regtempmin[0], data->temp_min[0]);
+ vt8231_write_value(data, regtempmin[0], data->temp_min[0]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -404,13 +396,12 @@ static ssize_t set_temp_max(struct devic
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_max[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
- vt8231_write_value(client, regtempmax[nr], data->temp_max[nr]);
+ vt8231_write_value(data, regtempmax[nr], data->temp_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -419,13 +410,12 @@ static ssize_t set_temp_min(struct devic
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_min[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
- vt8231_write_value(client, regtempmin[nr], data->temp_min[nr]);
+ vt8231_write_value(data, regtempmin[nr], data->temp_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -486,13 +476,12 @@ static ssize_t set_fan_min(struct device
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+ vt8231_write_value(data, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -500,12 +489,11 @@ static ssize_t set_fan_min(struct device
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
unsigned long val = simple_strtoul(buf, NULL, 10);
int nr = sensor_attr->index;
- int old = vt8231_read_value(client, VT8231_REG_FANDIV);
+ int old = vt8231_read_value(data, VT8231_REG_FANDIV);
long min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
@@ -516,7 +504,7 @@ static ssize_t set_fan_div(struct device
case 4: data->fan_div[nr] = 2; break;
case 8: data->fan_div[nr] = 3; break;
default:
- dev_err(&client->dev, "fan_div value %ld not supported."
+ dev_err(dev, "fan_div value %ld not supported."
"Choose one of 1, 2, 4 or 8!\n", val);
mutex_unlock(&data->update_lock);
return -EINVAL;
@@ -524,10 +512,10 @@ static ssize_t set_fan_div(struct device
/* Correct the fan minimum speed */
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
- vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+ vt8231_write_value(data, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
- vt8231_write_value(client, VT8231_REG_FANDIV, old);
+ vt8231_write_value(data, VT8231_REG_FANDIV, old);
mutex_unlock(&data->update_lock);
return count;
}
@@ -551,9 +539,16 @@ static ssize_t show_alarms(struct device
struct vt8231_data *data = vt8231_update_device(dev);
return sprintf(buf, "%d\n", data->alarms);
}
-
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
static struct attribute *vt8231_attributes_temps[6][4] = {
{
&dev_attr_temp1_input.attr,
@@ -648,6 +643,7 @@ static struct attribute *vt8231_attribut
&sensor_dev_attr_fan1_div.dev_attr.attr,
&sensor_dev_attr_fan2_div.dev_attr.attr,
&dev_attr_alarms.attr,
+ &dev_attr_name.attr,
NULL
};
@@ -655,13 +651,13 @@ static const struct attribute_group vt82
.attrs = vt8231_attributes,
};
-static struct i2c_driver vt8231_driver = {
+static struct platform_driver vt8231_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "vt8231",
},
- .attach_adapter = vt8231_detect,
- .detach_client = vt8231_detach_client,
+ .probe = vt8231_probe,
+ .remove = __devexit_p(vt8231_remove),
};
static struct pci_device_id vt8231_pci_ids[] = {
@@ -680,40 +676,18 @@ static struct pci_driver vt8231_pci_driv
.probe = vt8231_pci_probe,
};
-int vt8231_detect(struct i2c_adapter *adapter)
+int vt8231_probe(struct platform_device *pdev)
{
- struct i2c_client *client;
+ struct resource *res;
struct vt8231_data *data;
int err = 0, i;
- u16 val;
-
- /* 8231 requires multiple of 256 */
- if (force_addr) {
- isa_address = force_addr & 0xFF00;
- dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
- isa_address);
- if (PCIBIOS_SUCCESSFUL != pci_write_config_word(s_bridge,
- VT8231_BASE_REG, isa_address))
- return -ENODEV;
- }
-
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(s_bridge, VT8231_ENABLE_REG, &val))
- return -ENODEV;
-
- if (!(val & 0x0001)) {
- dev_warn(&adapter->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VT8231_ENABLE_REG,
- val | 0x0001))
- return -ENODEV;
- }
/* Reserve the ISA region */
- if (!request_region(isa_address, VT8231_EXTENT,
- vt8231_pci_driver.name)) {
- dev_err(&adapter->dev, "region 0x%x already in use!\n",
- isa_address);
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, VT8231_EXTENT,
+ vt8231_driver.driver.name)) {
+ dev_err(&pdev->dev, "Region 0x%lx-0x%lx already in use!\n",
+ (unsigned long)res->start, (unsigned long)res->end);
return -ENODEV;
}
@@ -722,33 +696,23 @@ int vt8231_detect(struct i2c_adapter *ad
goto exit_release;
}
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = isa_address;
- client->adapter = adapter;
- client->driver = &vt8231_driver;
-
- /* Fill in the remaining client fields and put into the global list */
- strlcpy(client->name, "vt8231", I2C_NAME_SIZE);
+ platform_set_drvdata(pdev, data);
+ data->addr = res->start;
+ data->name = "vt8231";
mutex_init(&data->update_lock);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
- vt8231_init_client(client);
+ vt8231_init_device(data);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&client->dev.kobj, &vt8231_group)))
- goto exit_detach;
+ if ((err = sysfs_create_group(&pdev->dev.kobj, &vt8231_group)))
+ goto exit_free;
/* Must update device information to find out the config field */
- data->uch_config = vt8231_read_value(client, VT8231_REG_UCH_CONFIG);
+ data->uch_config = vt8231_read_value(data, VT8231_REG_UCH_CONFIG);
for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++) {
if (ISTEMP(i, data->uch_config)) {
- if ((err = sysfs_create_group(&client->dev.kobj,
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
&vt8231_group_temps[i])))
goto exit_remove_files;
}
@@ -756,13 +720,13 @@ int vt8231_detect(struct i2c_adapter *ad
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++) {
if (ISVOLT(i, data->uch_config)) {
- if ((err = sysfs_create_group(&client->dev.kobj,
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
&vt8231_group_volts[i])))
goto exit_remove_files;
}
}
- data->class_dev = hwmon_device_register(&client->dev);
+ data->class_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_remove_files;
@@ -771,56 +735,51 @@ int vt8231_detect(struct i2c_adapter *ad
exit_remove_files:
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++)
- sysfs_remove_group(&client->dev.kobj, &vt8231_group_volts[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_volts[i]);
for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++)
- sysfs_remove_group(&client->dev.kobj, &vt8231_group_temps[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_temps[i]);
+
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group);
- sysfs_remove_group(&client->dev.kobj, &vt8231_group);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
+
exit_release:
- release_region(isa_address, VT8231_EXTENT);
+ release_region(res->start, VT8231_EXTENT);
return err;
}
-static int vt8231_detach_client(struct i2c_client *client)
+static int vt8231_remove(struct platform_device *pdev)
{
- struct vt8231_data *data = i2c_get_clientdata(client);
- int err, i;
+ struct vt8231_data *data = platform_get_drvdata(pdev);
+ int i;
hwmon_device_unregister(data->class_dev);
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++)
- sysfs_remove_group(&client->dev.kobj, &vt8231_group_volts[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_volts[i]);
for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++)
- sysfs_remove_group(&client->dev.kobj, &vt8231_group_temps[i]);
-
- sysfs_remove_group(&client->dev.kobj, &vt8231_group);
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_temps[i]);
- if ((err = i2c_detach_client(client))) {
- return err;
- }
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group);
- release_region(client->addr, VT8231_EXTENT);
+ release_region(data->addr, VT8231_EXTENT);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
-
return 0;
}
-static void vt8231_init_client(struct i2c_client *client)
+static void vt8231_init_device(struct vt8231_data *data)
{
- vt8231_write_value(client, VT8231_REG_TEMP1_CONFIG, 0);
- vt8231_write_value(client, VT8231_REG_TEMP2_CONFIG, 0);
+ vt8231_write_value(data, VT8231_REG_TEMP1_CONFIG, 0);
+ vt8231_write_value(data, VT8231_REG_TEMP2_CONFIG, 0);
}
static struct vt8231_data *vt8231_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct vt8231_data *data = i2c_get_clientdata(client);
+ struct vt8231_data *data = dev_get_drvdata(dev);
int i;
u16 low;
@@ -830,41 +789,41 @@ static struct vt8231_data *vt8231_update
|| !data->valid) {
for (i = 0; i < 6; i++) {
if (ISVOLT(i, data->uch_config)) {
- data->in[i] = vt8231_read_value(client,
+ data->in[i] = vt8231_read_value(data,
regvolt[i]);
- data->in_min[i] = vt8231_read_value(client,
+ data->in_min[i] = vt8231_read_value(data,
regvoltmin[i]);
- data->in_max[i] = vt8231_read_value(client,
+ data->in_max[i] = vt8231_read_value(data,
regvoltmax[i]);
}
}
for (i = 0; i < 2; i++) {
- data->fan[i] = vt8231_read_value(client,
+ data->fan[i] = vt8231_read_value(data,
VT8231_REG_FAN(i));
- data->fan_min[i] = vt8231_read_value(client,
+ data->fan_min[i] = vt8231_read_value(data,
VT8231_REG_FAN_MIN(i));
}
- low = vt8231_read_value(client, VT8231_REG_TEMP_LOW01);
+ low = vt8231_read_value(data, VT8231_REG_TEMP_LOW01);
low = (low >> 6) | ((low & 0x30) >> 2)
- | (vt8231_read_value(client, VT8231_REG_TEMP_LOW25) << 4);
+ | (vt8231_read_value(data, VT8231_REG_TEMP_LOW25) << 4);
for (i = 0; i < 6; i++) {
if (ISTEMP(i, data->uch_config)) {
- data->temp[i] = (vt8231_read_value(client,
+ data->temp[i] = (vt8231_read_value(data,
regtemp[i]) << 2)
| ((low >> (2 * i)) & 0x03);
- data->temp_max[i] = vt8231_read_value(client,
+ data->temp_max[i] = vt8231_read_value(data,
regtempmax[i]);
- data->temp_min[i] = vt8231_read_value(client,
+ data->temp_min[i] = vt8231_read_value(data,
regtempmin[i]);
}
}
- i = vt8231_read_value(client, VT8231_REG_FANDIV);
+ i = vt8231_read_value(data, VT8231_REG_FANDIV);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
- data->alarms = vt8231_read_value(client, VT8231_REG_ALARM1) |
- (vt8231_read_value(client, VT8231_REG_ALARM2) << 8);
+ data->alarms = vt8231_read_value(data, VT8231_REG_ALARM1) |
+ (vt8231_read_value(data, VT8231_REG_ALARM2) << 8);
/* Set alarm flags correctly */
if (!data->fan[0] && data->fan_min[0]) {
@@ -888,33 +847,102 @@ static struct vt8231_data *vt8231_update
return data;
}
+static int __devinit vt8231_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + VT8231_EXTENT - 1,
+ .name = "vt8231",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc("vt8231", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR "vt8231: Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR "vt8231: Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR "vt8231: Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
static int __devinit vt8231_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
- u16 val;
+ u16 address, val;
+ if (force_addr) {
+ address = force_addr & 0xff00;
+ dev_warn(&dev->dev, "Forcing ISA address 0x%x\n",
+ address);
+
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VT8231_BASE_REG, address | 1))
+ return -ENODEV;
+ }
if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_BASE_REG,
&val))
return -ENODEV;
- isa_address = val & ~(VT8231_EXTENT - 1);
- if (isa_address == 0 && force_addr == 0) {
+ address = val & ~(VT8231_EXTENT - 1);
+ if (address == 0) {
dev_err(&dev->dev, "base address not set -\
upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
- s_bridge = pci_dev_get(dev);
+ if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_ENABLE_REG,
+ &val))
+ return -ENODEV;
- if (i2c_isa_add_driver(&vt8231_driver)) {
- pci_dev_put(s_bridge);
- s_bridge = NULL;
+ if (!(val & 0x0001)) {
+ dev_warn(&dev->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VT8231_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
}
+ if (platform_driver_register(&vt8231_driver))
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ if (vt8231_device_add(address))
+ goto exit_unregister;
+
/* Always return failure here. This is to allow other drivers to bind
* to this pci device. We don't really want to have control over the
* pci device, we only wanted to read as few register values from it.
*/
+
+ /* We do, however, mark ourselves as using the PCI device to stop it
+ getting unloaded. */
+ s_bridge = pci_dev_get(dev);
+ return -ENODEV;
+
+exit_unregister:
+ platform_driver_unregister(&vt8231_driver);
+exit:
return -ENODEV;
}
@@ -927,7 +955,8 @@ static void __exit sm_vt8231_exit(void)
{
pci_unregister_driver(&vt8231_pci_driver);
if (s_bridge != NULL) {
- i2c_isa_del_driver(&vt8231_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&vt8231_driver);
pci_dev_put(s_bridge);
s_bridge = NULL;
}
--- linux-2.6.22-rc4.orig/drivers/hwmon/Kconfig 2007-06-12 10:15:52.000000000 +0200
+++ linux-2.6.22-rc4/drivers/hwmon/Kconfig 2007-06-12 20:48:30.000000000 +0200
@@ -517,9 +517,8 @@ config SENSORS_VT1211
config SENSORS_VT8231
tristate "VIA VT8231"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on PCI
select HWMON_VID
- select I2C_ISA
help
If you say yes here then you get support for the integrated sensors
in the VIA VT8231 device.
--
Jean Delvare
