Just upgraded my debian box to an Asus M2NPV-VM mainboard with 1GB ram
and a Athlon64-X2 4400+ cpu. I noticed that the k8temp values for the
CPU were off but I've read thats due to a problem with the cpu. I
noticed that lm-sensors (using the stock sensors.conf) reads only 3
fan values when I believe it should be reading 4. It correctly
detects my CPU and PSU fans but there are 2 chassis fan plugs on the
mainboard (currently without fans plugged into them) which would give
me a total of 4. Of the 3 fans lm-sensors outputs values for, one of
them reads 0 which I assume if one of the chassis fan ports. Is it a
bug that the 4th is not there or could I have possibly done something
wrong?
I'm still fairly new to linux, lm-sensors, and this mailing list so
please excuse if this has been addressed in the past at some point.
Many thanks!
Some info...
Debian (sid)
2.6.22-rc3 kernel
Asus M2NPV-VM mainboard
AMD Athlon64-X2 4400+ cpu
lm-sensors version 1:2.10.3-1
some output from sensors-detect:
Probing for PCI bus adapters...
Use driver `i2c-nforce2' for device 0000:00:0a.1: nVidia Corporation
nForce4 SMBus (MCP51)
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'... Yes
Found `ITE IT8716F Super IO Sensors' Success!
(address 0x290, driver `it87')
AMD K8 thermal sensors... Success!
(driver `k8temp')
and lastly, output from lm-sensors:
debian:~$ sensors
it8716-isa-0290
Adapter: ISA adapter
VCore: +1.36 V (min = +0.13 V, max = +4.21 V)
+3.3V: +3.33 V (min = +0.10 V, max = +4.18 V)
+5V: +4.87 V (min = +0.00 V, max = +6.85 V)
+12V: +11.65 V (min = +0.00 V, max = +16.32 V)
5VSB: +4.73 V (min = +0.00 V, max = +6.85 V)
VBat: +2.88 V
CPU Fan: 928 RPM (min = 500 RPM)
fan2: 0 RPM (min = 500 RPM) ALARM
PSU Fan: 1662 RPM (min = 500 RPM)
MB Temp: +25??C (low = -1??C, high = +127??C) sensor = diode
CPU Temp: +28??C (low = -1??C, high = +127??C) sensor = thermistor
?temp: +25??C (low = -1??C, high = +127??C) sensor = thermistor
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+9??C
Core0 Temp:
+0??C
Core1 Temp:
+3??C
Core1 Temp:
+11??C
