Convert the sis5595 driver from the nonsensical i2c-isa hack to a
regular platform driver.
Signed-off-by: Jean Delvare <khali at linux-fr.org>
---
Anyone with a SiS5595 chip could please test this patch and the
following one? Thanks.
drivers/hwmon/Kconfig | 3
drivers/hwmon/sis5595.c | 317 +++++++++++++++++++++++++----------------------
2 files changed, 171 insertions(+), 149 deletions(-)
--- linux-2.6.22-rc3.orig/drivers/hwmon/Kconfig 2007-06-03 17:16:09.000000000 +0200
+++ linux-2.6.22-rc3/drivers/hwmon/Kconfig 2007-06-03 17:27:34.000000000 +0200
@@ -431,8 +431,7 @@ config SENSORS_PC87427
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on I2C && PCI && EXPERIMENTAL
- select I2C_ISA
+ depends on PCI
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
--- linux-2.6.22-rc3.orig/drivers/hwmon/sis5595.c 2007-06-03 17:16:09.000000000 +0200
+++ linux-2.6.22-rc3/drivers/hwmon/sis5595.c 2007-06-03 17:33:48.000000000 +0200
@@ -54,8 +54,7 @@
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/init.h>
@@ -72,10 +71,7 @@ module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
-/* Device address
- Note that we can't determine the ISA address until we have initialized
- our module */
-static unsigned short address;
+static struct platform_device *pdev;
/* Many SIS5595 constants specified below */
@@ -165,7 +161,8 @@ static inline u8 DIV_TO_REG(int val)
/* For each registered chip, we need to keep some data in memory.
The structure is dynamically allocated. */
struct sis5595_data {
- struct i2c_client client;
+ unsigned short addr;
+ const char *name;
struct class_device *class_dev;
struct mutex lock;
@@ -189,21 +186,21 @@ struct sis5595_data {
static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */
-static int sis5595_detect(struct i2c_adapter *adapter);
-static int sis5595_detach_client(struct i2c_client *client);
+static int sis5595_probe(struct platform_device *pdev);
+static int sis5595_remove(struct platform_device *pdev);
-static int sis5595_read_value(struct i2c_client *client, u8 reg);
-static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value);
+static int sis5595_read_value(struct sis5595_data *data, u8 reg);
+static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value);
static struct sis5595_data *sis5595_update_device(struct device *dev);
-static void sis5595_init_client(struct i2c_client *client);
+static void sis5595_init_device(struct sis5595_data *data);
-static struct i2c_driver sis5595_driver = {
+static struct platform_driver sis5595_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "sis5595",
},
- .attach_adapter = sis5595_detect,
- .detach_client = sis5595_detach_client,
+ .probe = sis5595_probe,
+ .remove = __devexit_p(sis5595_remove),
};
/* 4 Voltages */
@@ -228,13 +225,12 @@ static ssize_t show_in_max(struct device
static ssize_t set_in_min(struct device *dev, const char *buf,
size_t count, int nr)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
- sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
+ sis5595_write_value(data, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -242,13 +238,12 @@ static ssize_t set_in_min(struct device
static ssize_t set_in_max(struct device *dev, const char *buf,
size_t count, int nr)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
- sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
+ sis5595_write_value(data, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -307,13 +302,12 @@ static ssize_t show_temp_over(struct dev
static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_over = TEMP_TO_REG(val);
- sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over);
+ sis5595_write_value(data, SIS5595_REG_TEMP_OVER, data->temp_over);
mutex_unlock(&data->update_lock);
return count;
}
@@ -326,13 +320,12 @@ static ssize_t show_temp_hyst(struct dev
static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_hyst = TEMP_TO_REG(val);
- sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst);
+ sis5595_write_value(data, SIS5595_REG_TEMP_HYST, data->temp_hyst);
mutex_unlock(&data->update_lock);
return count;
}
@@ -361,13 +354,12 @@ static ssize_t show_fan_min(struct devic
static ssize_t set_fan_min(struct device *dev, const char *buf,
size_t count, int nr)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+ sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -385,8 +377,7 @@ static ssize_t show_fan_div(struct devic
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
unsigned long min;
unsigned long val = simple_strtoul(buf, NULL, 10);
int reg;
@@ -394,7 +385,7 @@ static ssize_t set_fan_div(struct device
mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
- reg = sis5595_read_value(client, SIS5595_REG_FANDIV);
+ reg = sis5595_read_value(data, SIS5595_REG_FANDIV);
switch (val) {
case 1: data->fan_div[nr] = 0; break;
@@ -402,7 +393,7 @@ static ssize_t set_fan_div(struct device
case 4: data->fan_div[nr] = 2; break;
case 8: data->fan_div[nr] = 3; break;
default:
- dev_err(&client->dev, "fan_div value %ld not "
+ dev_err(dev, "fan_div value %ld not "
"supported. Choose one of 1, 2, 4 or 8!\n", val);
mutex_unlock(&data->update_lock);
return -EINVAL;
@@ -416,10 +407,10 @@ static ssize_t set_fan_div(struct device
reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
break;
}
- sis5595_write_value(client, SIS5595_REG_FANDIV, reg);
+ sis5595_write_value(data, SIS5595_REG_FANDIV, reg);
data->fan_min[nr] =
FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
- sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+ sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -473,6 +464,14 @@ static ssize_t show_alarms(struct device
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sis5595_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
static struct attribute *sis5595_attributes[] = {
&dev_attr_in0_input.attr,
&dev_attr_in0_min.attr,
@@ -495,6 +494,7 @@ static struct attribute *sis5595_attribu
&dev_attr_fan2_div.attr,
&dev_attr_alarms.attr,
+ &dev_attr_name.attr,
NULL
};
@@ -518,65 +518,32 @@ static const struct attribute_group sis5
};
/* This is called when the module is loaded */
-static int sis5595_detect(struct i2c_adapter *adapter)
+static int __devinit sis5595_probe(struct platform_device *pdev)
{
int err = 0;
int i;
- struct i2c_client *new_client;
struct sis5595_data *data;
+ struct resource *res;
char val;
- u16 a;
- if (force_addr)
- address = force_addr & ~(SIS5595_EXTENT - 1);
/* Reserve the ISA region */
- if (!request_region(address, SIS5595_EXTENT,
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, SIS5595_EXTENT,
sis5595_driver.driver.name)) {
err = -EBUSY;
goto exit;
}
- if (force_addr) {
- dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address);
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, SIS5595_BASE_REG, address))
- goto exit_release;
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(s_bridge, SIS5595_BASE_REG, &a))
- goto exit_release;
- if ((a & ~(SIS5595_EXTENT - 1)) != address)
- /* doesn't work for some chips? */
- goto exit_release;
- }
-
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) {
- goto exit_release;
- }
- if ((val & 0x80) == 0) {
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_byte(s_bridge, SIS5595_ENABLE_REG,
- val | 0x80))
- goto exit_release;
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val))
- goto exit_release;
- if ((val & 0x80) == 0)
- /* doesn't work for some chips! */
- goto exit_release;
- }
if (!(data = kzalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- new_client = &data->client;
- new_client->addr = address;
mutex_init(&data->lock);
- i2c_set_clientdata(new_client, data);
- new_client->adapter = adapter;
- new_client->driver = &sis5595_driver;
- new_client->flags = 0;
+ mutex_init(&data->update_lock);
+ data->addr = res->start;
+ data->name = "sis5595";
+ platform_set_drvdata(pdev, data);
/* Check revision and pin registers to determine whether 4 or 5 voltages */
pci_read_config_byte(s_bridge, SIS5595_REVISION_REG, &(data->revision));
@@ -589,47 +556,37 @@ static int sis5595_detect(struct i2c_ada
data->maxins = 4;
}
- /* Fill in the remaining client fields and put it into the global list */
- strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE);
-
- data->valid = 0;
- mutex_init(&data->update_lock);
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Initialize the SIS5595 chip */
- sis5595_init_client(new_client);
+ sis5595_init_device(data);
/* A few vars need to be filled upon startup */
for (i = 0; i < 2; i++) {
- data->fan_min[i] = sis5595_read_value(new_client,
+ data->fan_min[i] = sis5595_read_value(data,
SIS5595_REG_FAN_MIN(i));
}
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &sis5595_group)))
- goto exit_detach;
+ if ((err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group)))
+ goto exit_free;
if (data->maxins == 4) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(&pdev->dev,
&dev_attr_in4_input))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(&pdev->dev,
&dev_attr_in4_min))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(&pdev->dev,
&dev_attr_in4_max)))
goto exit_remove_files;
} else {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(&pdev->dev,
&dev_attr_temp1_input))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(&pdev->dev,
&dev_attr_temp1_max))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(&pdev->dev,
&dev_attr_temp1_max_hyst)))
goto exit_remove_files;
}
- data->class_dev = hwmon_device_register(&new_client->dev);
+ data->class_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_remove_files;
@@ -638,32 +595,26 @@ static int sis5595_detect(struct i2c_ada
return 0;
exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &sis5595_group);
- sysfs_remove_group(&new_client->dev.kobj, &sis5595_group_opt);
-exit_detach:
- i2c_detach_client(new_client);
+ sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
+ sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_opt);
exit_free:
kfree(data);
exit_release:
- release_region(address, SIS5595_EXTENT);
+ release_region(res->start, SIS5595_EXTENT);
exit:
return err;
}
-static int sis5595_detach_client(struct i2c_client *client)
+static int __devexit sis5595_remove(struct platform_device *pdev)
{
- struct sis5595_data *data = i2c_get_clientdata(client);
- int err;
+ struct sis5595_data *data = platform_get_drvdata(pdev);
hwmon_device_unregister(data->class_dev);
- sysfs_remove_group(&client->dev.kobj, &sis5595_group);
- sysfs_remove_group(&client->dev.kobj, &sis5595_group_opt);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- release_region(client->addr, SIS5595_EXTENT);
+ sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
+ sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_opt);
+ release_region(data->addr, SIS5595_EXTENT);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
@@ -671,41 +622,37 @@ static int sis5595_detach_client(struct
/* ISA access must be locked explicitly. */
-static int sis5595_read_value(struct i2c_client *client, u8 reg)
+static int sis5595_read_value(struct sis5595_data *data, u8 reg)
{
int res;
- struct sis5595_data *data = i2c_get_clientdata(client);
mutex_lock(&data->lock);
- outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
- res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET);
+ outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
+ res = inb_p(data->addr + SIS5595_DATA_REG_OFFSET);
mutex_unlock(&data->lock);
return res;
}
-static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value)
+static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value)
{
- struct sis5595_data *data = i2c_get_clientdata(client);
mutex_lock(&data->lock);
- outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
- outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET);
+ outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
+ outb_p(value, data->addr + SIS5595_DATA_REG_OFFSET);
mutex_unlock(&data->lock);
- return 0;
}
/* Called when we have found a new SIS5595. */
-static void sis5595_init_client(struct i2c_client *client)
+static void __devinit sis5595_init_device(struct sis5595_data *data)
{
- u8 config = sis5595_read_value(client, SIS5595_REG_CONFIG);
+ u8 config = sis5595_read_value(data, SIS5595_REG_CONFIG);
if (!(config & 0x01))
- sis5595_write_value(client, SIS5595_REG_CONFIG,
+ sis5595_write_value(data, SIS5595_REG_CONFIG,
(config & 0xf7) | 0x01);
}
static struct sis5595_data *sis5595_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct sis5595_data *data = i2c_get_clientdata(client);
+ struct sis5595_data *data = dev_get_drvdata(dev);
int i;
mutex_lock(&data->update_lock);
@@ -715,35 +662,35 @@ static struct sis5595_data *sis5595_upda
for (i = 0; i <= data->maxins; i++) {
data->in[i] =
- sis5595_read_value(client, SIS5595_REG_IN(i));
+ sis5595_read_value(data, SIS5595_REG_IN(i));
data->in_min[i] =
- sis5595_read_value(client,
+ sis5595_read_value(data,
SIS5595_REG_IN_MIN(i));
data->in_max[i] =
- sis5595_read_value(client,
+ sis5595_read_value(data,
SIS5595_REG_IN_MAX(i));
}
for (i = 0; i < 2; i++) {
data->fan[i] =
- sis5595_read_value(client, SIS5595_REG_FAN(i));
+ sis5595_read_value(data, SIS5595_REG_FAN(i));
data->fan_min[i] =
- sis5595_read_value(client,
+ sis5595_read_value(data,
SIS5595_REG_FAN_MIN(i));
}
if (data->maxins == 3) {
data->temp =
- sis5595_read_value(client, SIS5595_REG_TEMP);
+ sis5595_read_value(data, SIS5595_REG_TEMP);
data->temp_over =
- sis5595_read_value(client, SIS5595_REG_TEMP_OVER);
+ sis5595_read_value(data, SIS5595_REG_TEMP_OVER);
data->temp_hyst =
- sis5595_read_value(client, SIS5595_REG_TEMP_HYST);
+ sis5595_read_value(data, SIS5595_REG_TEMP_HYST);
}
- i = sis5595_read_value(client, SIS5595_REG_FANDIV);
+ i = sis5595_read_value(data, SIS5595_REG_FANDIV);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
data->alarms =
- sis5595_read_value(client, SIS5595_REG_ALARM1) |
- (sis5595_read_value(client, SIS5595_REG_ALARM2) << 8);
+ sis5595_read_value(data, SIS5595_REG_ALARM1) |
+ (sis5595_read_value(data, SIS5595_REG_ALARM2) << 8);
data->last_updated = jiffies;
data->valid = 1;
}
@@ -774,10 +721,50 @@ static int blacklist[] __devinitdata = {
PCI_DEVICE_ID_SI_5598,
0 };
+static int __devinit sis5595_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + SIS5595_EXTENT - 1,
+ .name = "sis5595",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc("sis5595", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR "sis5595: Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR "sis5595: Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR "sis5595: Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
static int __devinit sis5595_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
- u16 val;
+ u16 address;
+ u8 enable;
int *i;
for (i = blacklist; *i != 0; i++) {
@@ -790,26 +777,61 @@ static int __devinit sis5595_pci_probe(s
}
}
+ force_addr &= ~(SIS5595_EXTENT - 1);
+ if (force_addr) {
+ dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", force_addr);
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, SIS5595_BASE_REG, force_addr))
+ return -ENODEV;
+ }
+
if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(dev, SIS5595_BASE_REG, &val))
+ pci_read_config_word(dev, SIS5595_BASE_REG, &address))
return -ENODEV;
- address = val & ~(SIS5595_EXTENT - 1);
- if (address == 0 && force_addr == 0) {
+ address &= ~(SIS5595_EXTENT - 1);
+ if (!address) {
dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
+ if (force_addr && address != force_addr) {
+ /* doesn't work for some chips? */
+ dev_warn(&dev->dev, "Failed to force ISA address\n");
+ return -ENODEV;
+ }
- s_bridge = pci_dev_get(dev);
- if (i2c_isa_add_driver(&sis5595_driver)) {
- pci_dev_put(s_bridge);
- s_bridge = NULL;
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) {
+ return -ENODEV;
+ }
+ if (!(enable & 0x80)) {
+ if ((PCIBIOS_SUCCESSFUL !=
+ pci_write_config_byte(dev, SIS5595_ENABLE_REG,
+ enable | 0x80))
+ || (PCIBIOS_SUCCESSFUL !=
+ pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable))
+ || (!(enable & 0x80)))
+ /* doesn't work for some chips! */
+ return -ENODEV;
}
+ if (platform_driver_register(&sis5595_driver))
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ if (sis5595_device_add(address))
+ goto exit_unregister;
+
/* Always return failure here. This is to allow other drivers to bind
* to this pci device. We don't really want to have control over the
* pci device, we only wanted to read as few register values from it.
*/
+ s_bridge = pci_dev_get(dev);
+ return -ENODEV;
+
+exit_unregister:
+ platform_driver_unregister(&sis5595_driver);
+exit:
return -ENODEV;
}
@@ -828,7 +850,8 @@ static void __exit sm_sis5595_exit(void)
{
pci_unregister_driver(&sis5595_pci_driver);
if (s_bridge != NULL) {
- i2c_isa_del_driver(&sis5595_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&sis5595_driver);
pci_dev_put(s_bridge);
s_bridge = NULL;
}
--
Jean Delvare
