On Thu, 24 May 2007 09:34:37 -0600, Jim Cromie wrote: > Jean Delvare wrote: > > I finally found some time to convert the pc87360 driver to a platform > > driver. Jim (or anyone else with access to supported hardware), could > > you please give it a try and confirm that it works OK? > > yes it works! > > these are with the conf in debian unstable - > > soekris:~# uname -a > Linux soekris 2.6.22-rc2-sk #2 Mon May 21 19:15:36 MDT 2007 i586 GNU/Linux > soekris:~# > soekris:~# sensors > pc87366-isa-6620 > Adapter: ISA adapter > in0: +3.01 V (min = +0.00 V, max = +3.01 V) > in1: +2.01 V (min = +0.00 V, max = +3.01 V) > in2: +2.48 V (min = +0.00 V, max = +3.01 V) > in3: +0.66 V (min = +0.00 V, max = +3.01 V) > in4: +2.46 V (min = +0.00 V, max = +3.01 V) > in5: +2.49 V (min = +0.00 V, max = +3.01 V) > in6: +0.00 V (min = +0.00 V, max = +3.01 V) > Vsb: +3.31 V (min = +0.00 V, max = +6.03 V) > Vdd: +2.98 V (min = +0.00 V, max = +6.03 V) > Vbat: +3.01 V (min = +0.00 V, max = +3.01 V) > AVdd: +3.28 V (min = +0.00 V, max = +6.03 V) > CPU0 Temp: +127 C (low = -55 C, high = +127 C) OPEN > CPU0 Crit: +127 C ALARM > CPU1 Temp: +127 C (low = -55 C, high = +127 C) OPEN > CPU1 Crit: +127 C ALARM > S-IO Temp: +93 C (low = -55 C, high = +127 C) > S-IO Crit: +127 C Thanks for the report, Jim! Hopefully the output looks the same as without my patch? Did you try unloading and reloading the driver too? This patch is now in -mm. > [ 1903.061714] hwmon-vid: requested unknown VRM version > vid: +0.000 V (VRM Version 0.0) Hmmm, we should probably fix this warning, too. Maybe your CPU doesn't even have VID pins. Patch follows. -- Jean Delvare
