Hi people! To whom it may concern: keep up the excellent work on the
lm_sensors project :)
Here's my tiny contribution, my sensors.conf file. While it is relatively
simple, I had a near-impossible time finding close matches to my own machine
for comparison, so for others with the same/similar machine, I hope that
this helps you :)
The resulting outputs match my BIOS screen perfectly, though I am not 100%
certain what 'Vcore_2' is reading -- either CPU core voltage #2, or maybe
North Bridge voltage?
And all the other readings are available in the BIOS except Rear Case Fan,
which the BIOS doesn't report, but IS readable with lm_sensors.
Enjoy!
# File begins:
# Machine: MSI-6580 i845PE Max V2.0 w/Intel P4 Williamette 1.8 Ghz
# Stock CPU Speed = 1804 Mhz Overclocked to 2410 Mhz
# i82801 ICH4 (North Bridge?)
# BIOS - AMIBIOS 63-4000-001109-00101111-040201-845GE/PE-16580000
# Contrib: Sasha GrapefruiTgirl - tsassgirl at hotmail dot com
#----------------------------------------------------------------
# setting up temp sensor types (thermistor is default):
# 1 = PII/Celeron Diode
# 2 = 3904 transistor;
# 3435 = thermistor with Beta
# adjust vrm if your vid is wrong; see doc/vid
# CPU Temp reading is offset 10'C from BIOS reading; fixed
# 3.0V and 3.3V are switched around in BIOS and LM_sensors; fixed
# Other sensors appear unused; ignore them if desired;
#----------------------------------------------------------------
chip "w83627hf-isa-0290"
set vrm 9.0
label vid "(BIOS) VCore ID"
label clock "CPU MHz"
label temp1 "System Temp"
set temp1_over 45
set temp1_hyst 40
label temp2 "Northbridge Temp"
set temp2_over 55
set temp2_hyst 52
label temp3 "CPU Temp"
compute temp3 (@ - 10),(@ + 10)
set temp3_over 55
set temp3_hyst 52
label fan1 "CPU Fan RPM"
set fan1_div 4
set fan1_min 2000
label fan2 "Rear Fan RPM"
set fan2_div 4
set fan2_min 2000
ignore fan3
label in0 "CPU VCore 1"
set in0_min vid * 0.95
set in0_max vid * 1.025
label in1 "CPU VCore 2"
set in1_min vid * 0.95
set in1_max vid * 1.025
label in2 "+3.0V CMOS Bat"
set in2_min 3.0 * 0.95
set in2_max 3.0 * 1.05
label in3 "+5V"
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
label in4 "+12V"
compute in4 ((28/10)+1)*@ , @/((28/10)+1)
set in4_min 12 * 0.90
set in4_max 12 * 1.10
label in5 "-12V"
compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14
set in5_max -12 * 0.90
set in5_min -12 * 1.10
label in6 "-5V"
compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14
set in6_max -5 * 0.95
set in6_min -5 * 1.05
label in7 "+5.0V SB"
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
set in7_min 5 * 0.95
set in7_max 5 * 1.10
label in8 "+3.3V"
set in8_min 3.3 * 0.980
set in8_max 3.3 * 1.02
# EOF
_________________________________________________________________
http://www.imagine-windowslive.com/Themes/Messenger/Reward/Default.aspx?Locale=en-CA#
