This lets us get rid of macro-generated functions and shrinks the
driver size by about 7%.
Signed-off-by: Jean Delvare <khali at linux-fr.org>
---
drivers/hwmon/smsc47m1.c | 198 ++++++++++++++++++++++------------------------
1 file changed, 95 insertions(+), 103 deletions(-)
--- linux-2.6.21-rc6.orig/drivers/hwmon/smsc47m1.c 2007-04-18 22:57:24.000000000 +0200
+++ linux-2.6.21-rc6/drivers/hwmon/smsc47m1.c 2007-04-19 08:02:02.000000000 +0200
@@ -32,6 +32,7 @@
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/mutex.h>
@@ -157,11 +158,12 @@ static struct platform_driver smsc47m1_d
.remove = __devexit_p(smsc47m1_remove),
};
-/* nr is 0 or 1 in the callback functions below */
-
-static ssize_t get_fan(struct device *dev, char *buf, int nr)
+static ssize_t get_fan(struct device *dev, struct device_attribute
+ *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+ int nr = attr->index;
/* This chip (stupidly) stops monitoring fan speed if PWM is
enabled and duty cycle is 0%. This is fine if the monitoring
and control concern the same fan, but troublesome if they are
@@ -173,42 +175,54 @@ static ssize_t get_fan(struct device *de
return sprintf(buf, "%d\n", rpm);
}
-static ssize_t get_fan_min(struct device *dev, char *buf, int nr)
+static ssize_t get_fan_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+ int nr = attr->index;
int rpm = MIN_FROM_REG(data->fan_preload[nr],
DIV_FROM_REG(data->fan_div[nr]));
return sprintf(buf, "%d\n", rpm);
}
-static ssize_t get_fan_div(struct device *dev, char *buf, int nr)
+static ssize_t get_fan_div(struct device *dev, struct device_attribute
+ *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
- return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
}
-static ssize_t get_pwm(struct device *dev, char *buf, int nr)
+static ssize_t get_pwm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
- return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
+ return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[attr->index]));
}
-static ssize_t get_pwm_en(struct device *dev, char *buf, int nr)
+static ssize_t get_pwm_en(struct device *dev, struct device_attribute
+ *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
- return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr]));
+ return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[attr->index]));
}
-static ssize_t get_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t get_alarms(struct device *dev, struct device_attribute
+ *devattr, char *buf)
{
struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
return sprintf(buf, "%d\n", data->alarms);
}
-static ssize_t set_fan_min(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_fan_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct smsc47m1_data *data = dev_get_drvdata(dev);
+ int nr = attr->index;
long rpmdiv, val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
@@ -231,11 +245,12 @@ static ssize_t set_fan_min(struct device
determined in part by the fan clock divider. This follows the principle
of least surprise; the user doesn't expect the fan minimum to change just
because the divider changed. */
-static ssize_t set_fan_div(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_fan_div(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct smsc47m1_data *data = dev_get_drvdata(dev);
-
+ int nr = attr->index;
long new_div = simple_strtol(buf, NULL, 10), tmp;
u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
@@ -279,11 +294,12 @@ static ssize_t set_fan_div(struct device
return count;
}
-static ssize_t set_pwm(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_pwm(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct smsc47m1_data *data = dev_get_drvdata(dev);
-
+ int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
if (val < 0 || val > 255)
@@ -299,11 +315,12 @@ static ssize_t set_pwm(struct device *de
return count;
}
-static ssize_t set_pwm_en(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_pwm_en(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct smsc47m1_data *data = dev_get_drvdata(dev);
-
+ int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
if (val != 0 && val != 1)
@@ -320,56 +337,16 @@ static ssize_t set_pwm_en(struct device
}
#define fan_present(offset) \
-static ssize_t get_fan##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return get_fan(dev, buf, offset - 1); \
-} \
-static ssize_t get_fan##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return get_fan_min(dev, buf, offset - 1); \
-} \
-static ssize_t set_fan##offset##_min (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_fan_min(dev, buf, count, offset - 1); \
-} \
-static ssize_t get_fan##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return get_fan_div(dev, buf, offset - 1); \
-} \
-static ssize_t set_fan##offset##_div (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_fan_div(dev, buf, count, offset - 1); \
-} \
-static ssize_t get_pwm##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return get_pwm(dev, buf, offset - 1); \
-} \
-static ssize_t set_pwm##offset (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_pwm(dev, buf, count, offset - 1); \
-} \
-static ssize_t get_pwm##offset##_en (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return get_pwm_en(dev, buf, offset - 1); \
-} \
-static ssize_t set_pwm##offset##_en (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return set_pwm_en(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset, \
- NULL); \
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- get_fan##offset##_min, set_fan##offset##_min); \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
- get_fan##offset##_div, set_fan##offset##_div); \
-static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
- get_pwm##offset, set_pwm##offset); \
-static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
- get_pwm##offset##_en, set_pwm##offset##_en);
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan, \
+ NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ get_fan_min, set_fan_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ get_fan_div, set_fan_div, offset - 1); \
+static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ get_pwm, set_pwm, offset - 1); \
+static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+ get_pwm_en, set_pwm_en, offset - 1)
fan_present(1);
fan_present(2);
@@ -390,22 +367,22 @@ static DEVICE_ATTR(name, S_IRUGO, show_n
setup so we create them individually. It is still convenient to define a
group to remove them all at once. */
static struct attribute *smsc47m1_attributes[] = {
- &dev_attr_fan1_input.attr,
- &dev_attr_fan1_min.attr,
- &dev_attr_fan1_div.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_fan2_min.attr,
- &dev_attr_fan2_div.attr,
- &dev_attr_fan3_input.attr,
- &dev_attr_fan3_min.attr,
- &dev_attr_fan3_div.attr,
-
- &dev_attr_pwm1.attr,
- &dev_attr_pwm1_enable.attr,
- &dev_attr_pwm2.attr,
- &dev_attr_pwm2_enable.attr,
- &dev_attr_pwm3.attr,
- &dev_attr_pwm3_enable.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_div.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_div.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
&dev_attr_alarms.attr,
&dev_attr_name.attr,
@@ -547,46 +524,61 @@ static int __devinit smsc47m1_probe(stru
/* Register sysfs hooks */
if (fan1) {
- if ((err = device_create_file(dev, &dev_attr_fan1_input))
- || (err = device_create_file(dev, &dev_attr_fan1_min))
- || (err = device_create_file(dev, &dev_attr_fan1_div)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_fan1_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan1_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan1_div.dev_attr)))
goto error_remove_files;
} else
dev_dbg(dev, "Fan 1 not enabled by hardware, skipping\n");
if (fan2) {
- if ((err = device_create_file(dev, &dev_attr_fan2_input))
- || (err = device_create_file(dev, &dev_attr_fan2_min))
- || (err = device_create_file(dev, &dev_attr_fan2_div)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_fan2_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan2_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan2_div.dev_attr)))
goto error_remove_files;
} else
dev_dbg(dev, "Fan 2 not enabled by hardware, skipping\n");
if (fan3) {
- if ((err = device_create_file(dev, &dev_attr_fan3_input))
- || (err = device_create_file(dev, &dev_attr_fan3_min))
- || (err = device_create_file(dev, &dev_attr_fan3_div)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_fan3_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_div.dev_attr)))
goto error_remove_files;
} else
dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n");
if (pwm1) {
- if ((err = device_create_file(dev, &dev_attr_pwm1))
- || (err = device_create_file(dev, &dev_attr_pwm1_enable)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm1.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm1_enable.dev_attr)))
goto error_remove_files;
} else
dev_dbg(dev, "PWM 1 not enabled by hardware, skipping\n");
if (pwm2) {
- if ((err = device_create_file(dev, &dev_attr_pwm2))
- || (err = device_create_file(dev, &dev_attr_pwm2_enable)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm2.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2_enable.dev_attr)))
goto error_remove_files;
} else
dev_dbg(dev, "PWM 2 not enabled by hardware, skipping\n");
if (pwm3) {
- if ((err = device_create_file(dev, &dev_attr_pwm3))
- || (err = device_create_file(dev, &dev_attr_pwm3_enable)))
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm3.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm3_enable.dev_attr)))
goto error_remove_files;
} else
dev_dbg(dev, "PWM 3 not enabled by hardware, skipping\n");
--
Jean Delvare
