On Tue, Apr 17, 2007 at 11:27:51PM +0200, Jan van Tiggelen wrote: > At the moment, schematics for both the 83627DHG and the ICH7 and also the > full bios changelog for this board are in the request queue at MSI again. > > Probably this time it does make sense to use the PECI interface for giving > more system controls to the ICH7. Let's see what the schematics will tell > us. Hmm, I read that the ICH8 supports PECI (in the kernel documents for the ehf driver) however I never read anything about ICH7 supporting it...in either case I'm not very familiar with it. > Jordan, meanwhile, could you post your current BIOS version? And did you > check the other outputs from your sensors, such as voltages, etc.... Are > they all reading correctly? > OK, so I got the isadumps and the bios version. I made sure the driver didn't get loaded. I did a diff on the dumps, it does seem that the output changes, although I'm assuming this could be the voltages/temperatures/etc which are changing, so I'm not going to make any assumptions just yet. bios is 7.3b7 infact it seems i'm one version out of date. it doesn't even list 7.3 on their official bios page here, which is strange... http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=267 and here are the isadumps: smart fan in bios off: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 04 ff 04 7f 03 00 00 00 01 01 01 01 3c 3c 0a 0a 10: 04 ff 00 00 00 01 01 3c 42 17 00 00 ff ff ff c4 20: 99 ec cd cd ff b5 c3 22 3a 12 35 da 00 96 18 9e 30: 5b 44 34 04 60 38 b6 0f 23 51 08 87 a4 2a 05 ff 40: 01 2e 1f fe ff ff 01 05 2d 00 00 04 58 95 00 a3 50: ff ff 00 ff ff ff 00 80 c1 70 ff ff 19 e5 04 05 60: 04 7f 40 00 01 01 3c ff 01 ff 01 ff ff ff ff ff 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 80: 04 ff 04 7f 03 00 00 00 01 01 01 01 3c 3c 0a 0a 90: 04 ff 00 00 00 01 01 3c 42 17 00 00 ff ff ff c6 a0: 99 ec cd cd ff b5 c3 22 3a 12 35 da 00 96 18 9e b0: 5b 44 34 04 60 38 b6 0f 23 51 08 87 a4 2a 05 ff c0: 01 00 10 fe ff ff 01 05 2d 00 00 04 58 95 00 a3 d0: ff ff 00 ff ff ff 00 80 c1 70 ff ff 19 e5 04 05 e0: 04 7f 40 00 01 01 3c ff 01 ff 01 ff ff ff ff ff f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff smart fan in bios on: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 04 ff 04 7f 03 00 00 00 01 01 01 01 3c 3c 0a 0a 10: 04 ff 00 00 00 01 01 3c 42 17 00 00 ff ff ff c8 20: 98 ec cd cd ff b5 c3 22 38 27 34 da 00 9e 18 9e 30: 1b 44 34 04 60 78 96 1f 23 51 08 86 a4 2a 04 ff 40: 01 6e 1f fe ff ff 01 05 2d 00 00 04 58 95 00 a3 50: ff ff 00 ff ff ff 00 80 c1 70 ff ff 19 e5 04 05 60: 04 7f 40 00 01 01 3c ff 01 ff 01 ff ff ff ff ff 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 80: 04 ff 04 7f 03 00 00 00 01 01 01 01 3c 3c 0a 0a 90: 04 ff 00 00 00 01 01 3c 42 17 00 00 ff ff ff ca a0: 98 ec cd cd ff b5 c3 22 38 28 34 da 00 9e 18 9e b0: 1b 44 34 04 60 78 96 1f 23 51 08 86 a4 2a 04 ff c0: 01 00 10 fe ff ff 01 05 2d 00 00 04 58 95 00 a3 d0: ff ff 00 ff ff ff 00 80 c1 70 ff ff 19 e5 04 05 e0: 04 7f 40 00 01 01 3c ff 01 ff 01 ff ff ff ff ff f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff As far as I can tell, voltages/temperatures/etc are all working correctly. Although I did initially have an issue with 3 temperature sensors showing up, where as my bios only shows 2. I'm guessing this motherboard just doesn't use the one, so it was constantly reporting ridiculous values. I just added an ignore line in my sensors.conf for that. For reference, here's the output of sensors: w83627dhg-isa-0290 Adapter: ISA adapter VCore: +1.21 V (min = +0.00 V, max = +1.74 V) in1: +12.51 V (min = +1.27 V, max = +8.34 V) ALARM AVCC: +3.28 V (min = +0.43 V, max = +2.53 V) ALARM 3VCC: +3.28 V (min = +0.83 V, max = +1.09 V) ALARM in4: +2.04 V (min = +0.77 V, max = +0.03 V) ALARM in5: +1.45 V (min = +1.20 V, max = +0.96 V) ALARM in6: +4.99 V (min = +0.90 V, max = +0.79 V) ALARM VSB: +3.25 V (min = +0.13 V, max = +1.25 V) ALARM VBAT: +3.09 V (min = +2.13 V, max = +1.15 V) ALARM Case Fan: 1480 RPM (min = 629 RPM, div = 16) CPU Fan: 2109 RPM (min = 514 RPM, div = 16) Aux Fan: 1591 RPM (min = 2008 RPM, div = 16) ALARM Sys Temp: +33 C (high = +81 C, hyst = +8 C) CPU Temp: +33.5 C (high = +120.0 C, hyst = +115.0 C) coretemp-isa-0000 Adapter: ISA adapter temp1: +29 C (high = +85 C) coretemp-isa-0001 Adapter: ISA adapter temp1: +24 C (high = +85 C)
