On 1/6/07, Alexander Syring <noreply at asyring.homeip.net> wrote: > Am Sonntag, 7. Januar 2007 00:33 schrieb Salatiel Filho: > > Hi , i have a hp pavillion dv8000. > > > > sensors-detect build this file: > > > > > > #----cut here---- > > # I2C adapter drivers > > # modprobe unknown adapter NVIDIA i2c adapter 0 at 1:00.0 > > # modprobe unknown adapter NVIDIA i2c adapter 1 at 1:00.0 > > # modprobe unknown adapter NVIDIA i2c adapter 2 at 1:00.0 > > modprobe i2c-i801 > > # Chip drivers > > # Warning: the required module ds1621 is not currently installed > > # on your system. For status of 2.6 kernel ports check > > # http://www.lm-sensors.org/wiki/Devices. If driver is built > > # into the kernel, or unavailable, comment out the following line. > look there ^^^^^^^^^^^^^^^^^^ > you have to compile the ds1621 kernel modul to load it and then senors find > your sensor values > > > modprobe ds1621 > > # Warning: the required module eeprom is not currently installed > > # on your system. For status of 2.6 kernel ports check > > # http://www.lm-sensors.org/wiki/Devices. If driver is built > > # into the kernel, or unavailable, comment out the following line. > > modprobe eeprom > > # sleep 2 # optional > > /usr/local/bin/sensors -s # recommended > > #----cut here---- > > > > > > but after all modules be SUCCESSFULLY loaded sensors -s still returns : > > > > No sensors found! > > Make sure you loaded all the kernel drivers you need. > > Try sensors-detect to find out which these are. > > > > What is the problem ??? > > > > Thanks in advice ... > > _______________________________________________ > lm-sensors mailing list > lm-sensors at lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > Ok. sensors-detect now changed to : #----cut here---- # I2C adapter drivers # modprobe unknown adapter NVIDIA i2c adapter 0 at 1:00.0 # modprobe unknown adapter NVIDIA i2c adapter 1 at 1:00.0 # modprobe unknown adapter NVIDIA i2c adapter 2 at 1:00.0 modprobe i2c-i801 # Chip drivers modprobe ds1621 modprobe eeprom # sleep 2 # optional /usr/local/bin/sensors -s # recommended but i still get the same error loading sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. One odd thing that i notice is that it doesn`t exist i2c-i801 , it does exit i2c_i801 so i have to change manually. any other ideas ? Thanks ... -- []'s Salatiel "O maior prazer do inteligente ? bancar o idiota diante de um idiota que banca o inteligente".
