Fix debug messages in w83781d at detection time. We can't use dev_dbg()
on an i2c client's device before calling i2c_attach_client() on that
client.
Signed-off-by: Jean Delvare <khali at linux-fr.org>
---
drivers/hwmon/w83781d.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
This patch is for 2.6.19.
--- linux-2.6.19-rc1.orig/drivers/hwmon/w83781d.c 2006-10-09 23:54:30.000000000 +0200
+++ linux-2.6.19-rc1/drivers/hwmon/w83781d.c 2006-10-10 09:19:00.000000000 +0200
@@ -1099,7 +1099,8 @@
bank. */
if (kind < 0) {
if (w83781d_read_value(client, W83781D_REG_CONFIG) & 0x80) {
- dev_dbg(dev, "Detection failed at step 3\n");
+ dev_dbg(&adapter->dev, "Detection of w83781d chip "
+ "failed at step 3\n");
err = -ENODEV;
goto ERROR2;
}
@@ -1109,7 +1110,8 @@
if ((!(val1 & 0x07)) &&
(((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
|| ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
- dev_dbg(dev, "Detection failed at step 4\n");
+ dev_dbg(&adapter->dev, "Detection of w83781d chip "
+ "failed at step 4\n");
err = -ENODEV;
goto ERROR2;
}
@@ -1119,7 +1121,8 @@
((val1 & 0x80) && (val2 == 0x5c)))) {
if (w83781d_read_value
(client, W83781D_REG_I2C_ADDR) != address) {
- dev_dbg(dev, "Detection failed at step 5\n");
+ dev_dbg(&adapter->dev, "Detection of w83781d "
+ "chip failed at step 5\n");
err = -ENODEV;
goto ERROR2;
}
@@ -1141,8 +1144,8 @@
else if (val2 == 0x12)
vendid = asus;
else {
- dev_dbg(dev, "Chip was made by neither "
- "Winbond nor Asus?\n");
+ dev_dbg(&adapter->dev, "w83781d chip vendor is "
+ "neither Winbond nor Asus\n");
err = -ENODEV;
goto ERROR2;
}
@@ -1161,10 +1164,9 @@
kind = as99127f;
else {
if (kind == 0)
- dev_warn(dev, "Ignoring 'force' "
+ dev_warn(&adapter->dev, "Ignoring 'force' "
"parameter for unknown chip at "
- "adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
+ "address 0x%02x\n", address);
err = -EINVAL;
goto ERROR2;
}
--
Jean Delvare
