Hi Jean,
it seems that the ADT7475 is compatible with an ADT7463, so i have tried to
use the lm85 driver. (The ADT7475 is missing the Vid Inputs.)
My first attempd was to force the ADT7463 with
modprobe lm85 force_adt7463:0,0x2e
but this fails with
=====
FATAL: Error inserting
lm85 /lib/modules/2.6.16.21-0.13-smp/kernel/drivers/hwmon/lm85.ko): Unknown
symbol in module, or unknown parameter (see dmesg)
====
After that i have added the verstep to lm85.c
#define LM85_VERSTEP_ADT7475 0x69
and changed inside lm85_detect ...
} else if( company == LM85_COMPANY_ANALOG_DEV
&& (verstep == LM85_VERSTEP_ADT7463
|| verstep == LM85_VERSTEP_ADT7463C
|| verstep == LM85_VERSTEP_ADT7475) ) {
kind = adt7463 ;
now sensors give me the following infos:
snip===============
adt7463-i2c-1-2e
Adapter: SMBus nForce2 adapter at 1c40
V1.5: +0.000 V (min = +0.00 V, max = +3.32 V)
VCore: +0.000 V (min = +0.00 V, max = +2.99 V) ALARM
V3.3: +3.395 V (min = +0.00 V, max = +4.38 V)
V5: +0.000 V (min = +0.00 V, max = +6.64 V)
V12: +0.000 V (min = +0.00 V, max = +15.94 V)
CPU_Fan: 2019 RPM (min = 0 RPM)
fan2: 1420 RPM (min = 0 RPM)
fan3: 1889 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
CPU Temp: +0.25?C (low = +1?C, high = -1?C) ALARM FAULT
Board Temp:
+87.00?C (low = +1?C, high = -1?C)
Remote Temp:
+0.00?C (low = +1?C, high = -1?C) ALARM FAULT
CPU_PWM: 0
Fan2_PWM: 0
Fan3_PWM: 0
vid: +0.000 V (VRM Version 2.4)
snap===================
What do you think about this ?
===
Juergen
