Hi all,
I've recently installed lm_sensors on my ST20G5. sensors-detect seems
to work properly
#sensors-detect
...
Probing for `ITE IT8712F'
Trying address 0x0290... Success!
(confidence 8, driver `it87')
...
Probing for `ITE 8712F Super IO Sensors'
Success... found at address 0x0290
...
but later I get wrong results from the sensors command. Using
an empty config file I get
#sensors -c /dev/null
it8712-isa-0290
Adapter: ISA adapter
...
fan1: 3515 RPM (min = 0 RPM, div = 8)
fan2: 0 RPM (min = 3013 RPM, div = 8)
fan3: 0 RPM (min = 3013 RPM, div = 8)
M/B Temp: +44 C (low = +15 C, high = +40 C) sensor = thermistor
CPU Temp: -55 C (low = -83 C, high = +7 C) sensor = thermistor
Temp3: -55 C (low = +15 C, high = +45 C) sensor = thermistor
notice that using the default sensors.conf I get the same results.
In the BIOS I typically have
MB temp 45 C
CPU temp 56 C
System temp 43 C
CPU fan speed 1432 RPM
FAN 2 speed 0 RPM
FAN 3 speed 3443 RPM
Any suggestion?
Thanks,
Giulio.
