This driver adds support for the Apple Motion Sensor (AMS) as found in
2005 revisions of Apple PowerBooks and iBooks. It implements both the
PMU and I?C variants. The I?C driver and mouse emulation is based on
code by Stelian Pop <stelian at popies.net>, while the PMU driver has been
developped by myself. HD parking support will be added later.
Please apply to -mm for testing.
Signed-off-by: Michael Hanselmann <linux-kernel at hansmi.ch>
---
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams-core.c linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams-core.c
--- linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams-core.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams-core.c 2006-07-15 22:31:18.000000000 +0200
@@ -0,0 +1,255 @@
+/*
+ * Apple Motion Sensor driver
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian at popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel at hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/pmac_pfunc.h>
+
+#include "ams.h"
+
+/* There is only one motion sensor per machine */
+struct ams ams;
+
+static unsigned int verbose;
+module_param(verbose, bool, 0644);
+MODULE_PARM_DESC(verbose, "Show free falls and shocks in kernel output");
+
+/* Call with lock held! */
+void ams_sensors(s8 *x, s8 *y, s8 *z)
+{
+ u32 orient = ams.vflag? ams.orient1 : ams.orient2;
+
+ if (orient & 0x80)
+ /* X and Y swapped */
+ ams.get_xyz(y, x, z);
+ else
+ ams.get_xyz(x, y, z);
+
+ if (orient & 0x04)
+ *z = ~(*z);
+ if (orient & 0x02)
+ *y = ~(*y);
+ if (orient & 0x01)
+ *x = ~(*x);
+}
+
+static ssize_t ams_show_current(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ s8 x, y, z;
+
+ mutex_lock(&ams.lock);
+ ams_sensors(&x, &y, &z);
+ mutex_unlock(&ams.lock);
+
+ return snprintf(buf, PAGE_SIZE, "%d %d %d\n", x, y, z);
+}
+
+static DEVICE_ATTR(current, S_IRUGO, ams_show_current, NULL);
+
+static void ams_handle_irq(void *data)
+{
+ enum ams_irq irq = *((enum ams_irq *)data);
+
+ spin_lock(&ams.irq_lock);
+
+ ams.worker_irqs |= irq;
+ schedule_work(&ams.worker);
+
+ spin_unlock(&ams.irq_lock);
+}
+
+static enum ams_irq ams_freefall_irq_data = AMS_IRQ_FREEFALL;
+static struct pmf_irq_client ams_freefall_client = {
+ .owner = THIS_MODULE,
+ .handler = ams_handle_irq,
+ .data = &ams_freefall_irq_data,
+};
+
+static enum ams_irq ams_shock_irq_data = AMS_IRQ_SHOCK;
+static struct pmf_irq_client ams_shock_client = {
+ .owner = THIS_MODULE,
+ .handler = ams_handle_irq,
+ .data = &ams_shock_irq_data,
+};
+
+/* Once hard disk parking is implemented in the kernel, this function can
+ * trigger it.
+ */
+static void ams_worker(void *data)
+{
+ mutex_lock(&ams.lock);
+
+ if (ams.has_device) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ams.irq_lock, flags);
+
+ if (ams.worker_irqs & AMS_IRQ_FREEFALL) {
+ if (verbose)
+ printk(KERN_INFO "ams: freefall detected!\n");
+
+ ams.worker_irqs &= ~AMS_IRQ_FREEFALL;
+
+ /* we must call this with interrupts enabled */
+ spin_unlock_irqrestore(&ams.irq_lock, flags);
+ ams.clear_irq(AMS_IRQ_FREEFALL);
+ spin_lock_irqsave(&ams.irq_lock, flags);
+ }
+
+ if (ams.worker_irqs & AMS_IRQ_SHOCK) {
+ if (verbose)
+ printk(KERN_INFO "ams: shock detected!\n");
+
+ ams.worker_irqs &= ~AMS_IRQ_SHOCK;
+
+ /* we must call this with interrupts enabled */
+ spin_unlock_irqrestore(&ams.irq_lock, flags);
+ ams.clear_irq(AMS_IRQ_SHOCK);
+ spin_lock_irqsave(&ams.irq_lock, flags);
+ }
+
+ spin_unlock_irqrestore(&ams.irq_lock, flags);
+ }
+
+ mutex_unlock(&ams.lock);
+}
+
+/* Call with lock held! */
+int ams_sensor_attach(void)
+{
+ int result;
+ u32 *prop;
+
+ /* Get orientation */
+ prop = (u32*)get_property(ams.of_node, "orientation", NULL);
+ if (!prop)
+ return -ENODEV;
+ ams.orient1 = *prop;
+ ams.orient2 = *(prop + 1);
+
+ /* Register freefall interrupt handler */
+ result = pmf_register_irq_client(ams.of_node,
+ "accel-int-1",
+ &ams_freefall_client);
+ if (result < 0)
+ return -ENODEV;
+
+ /* Reset saved irqs */
+ ams.worker_irqs = 0;
+
+ /* Register shock interrupt handler */
+ result = pmf_register_irq_client(ams.of_node,
+ "accel-int-2",
+ &ams_shock_client);
+ if (result < 0) {
+ pmf_unregister_irq_client(&ams_freefall_client);
+ return -ENODEV;
+ }
+
+ /* Create device */
+ ams.of_dev = of_platform_device_create(ams.of_node, "ams", NULL);
+ if (!ams.of_dev) {
+ pmf_unregister_irq_client(&ams_shock_client);
+ pmf_unregister_irq_client(&ams_freefall_client);
+ return -ENODEV;
+ }
+
+ /* Create attributes */
+ device_create_file(&ams.of_dev->dev, &dev_attr_current);
+
+ ams.vflag = !!(ams.get_vendor() & 0x10);
+
+ /* Init mouse device */
+ ams_mouse_init();
+
+ return 0;
+}
+
+int __init ams_init(void)
+{
+ struct device_node *np;
+
+ spin_lock_init(&ams.irq_lock);
+ mutex_init(&ams.lock);
+ INIT_WORK(&ams.worker, ams_worker, NULL);
+
+#ifdef CONFIG_SENSORS_AMS_I2C
+ np = of_find_node_by_name(NULL, "accelerometer");
+ if (np && device_is_compatible(np, "AAPL,accelerometer_1"))
+ /* Found I2C motion sensor */
+ return ams_i2c_init(np);
+#endif
+
+#ifdef CONFIG_SENSORS_AMS_PMU
+ np = of_find_node_by_name(NULL, "sms");
+ if (np && device_is_compatible(np, "sms"))
+ /* Found PMU motion sensor */
+ return ams_pmu_init(np);
+#endif
+
+ printk(KERN_ERR "ams: No motion sensor found.\n");
+
+ return -ENODEV;
+}
+
+void ams_exit(void)
+{
+ mutex_lock(&ams.lock);
+
+ if (ams.has_device) {
+ /* Remove mouse device */
+ ams_mouse_exit();
+
+ /* Shut down implementation */
+ ams.exit();
+
+ /* Cancel interrupt worker
+ *
+ * We do this after ams.exit(), because an interrupt might
+ * have arrived before disabling them.
+ */
+ cancel_delayed_work(&ams.worker);
+ flush_scheduled_work();
+
+ /* Remove attributes */
+ device_remove_file(&ams.of_dev->dev, &dev_attr_current);
+
+ /* Remove device */
+ of_device_unregister(ams.of_dev);
+
+ /* Remove handler */
+ pmf_unregister_irq_client(&ams_shock_client);
+ pmf_unregister_irq_client(&ams_freefall_client);
+ }
+
+ mutex_unlock(&ams.lock);
+}
+
+MODULE_AUTHOR("Stelian Pop, Michael Hanselmann");
+MODULE_DESCRIPTION("Apple Motion Sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(ams_init);
+module_exit(ams_exit);
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams.h linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams.h
--- linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams.h 2006-07-15 22:28:59.000000000 +0200
@@ -0,0 +1,72 @@
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <asm/of_device.h>
+
+enum ams_irq {
+ AMS_IRQ_FREEFALL = 0x01,
+ AMS_IRQ_SHOCK = 0x02,
+ AMS_IRQ_GLOBAL = 0x04,
+ AMS_IRQ_ALL =
+ AMS_IRQ_FREEFALL |
+ AMS_IRQ_SHOCK |
+ AMS_IRQ_GLOBAL,
+};
+
+struct ams {
+ /* Locks */
+ spinlock_t irq_lock;
+ struct mutex lock;
+
+ /* General properties */
+ struct device_node *of_node;
+ struct of_device *of_dev;
+ char has_device;
+ char vflag;
+ u32 orient1;
+ u32 orient2;
+
+ /* Interrupt worker */
+ struct work_struct worker;
+ u8 worker_irqs;
+
+ /* Implementation
+ *
+ * Only call these functions with the main lock held.
+ */
+ void (*exit)(void);
+
+ void (*get_xyz)(s8 *x, s8 *y, s8 *z);
+ u8 (*get_vendor)(void);
+
+ void (*clear_irq)(enum ams_irq reg);
+
+#ifdef CONFIG_SENSORS_AMS_I2C
+ /* I2C properties */
+ int i2c_bus;
+ int i2c_address;
+ struct i2c_client i2c_client;
+#endif
+
+ /* Mouse emulation */
+ struct task_struct *kthread;
+ struct input_dev *idev;
+ __u16 bustype;
+
+ /* calibrated null values */
+ int xcalib, ycalib, zcalib;
+};
+
+extern struct ams ams;
+
+extern void ams_sensors(s8 *x, s8 *y, s8 *z);
+extern int ams_sensor_attach(void);
+
+extern int ams_pmu_init(struct device_node *np);
+extern int ams_i2c_init(struct device_node *np);
+
+extern void ams_mouse_init(void);
+extern void ams_mouse_exit(void);
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams-i2c.c linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams-i2c.c
--- linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams-i2c.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams-i2c.c 2006-07-15 22:28:59.000000000 +0200
@@ -0,0 +1,289 @@
+/*
+ * Apple Motion Sensor driver (I2C variant)
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian at popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel at hansmi.ch)
+ *
+ * Clean room implementation based on the reverse engineered Mac OS X driver by
+ * Johannes Berg <johannes at sipsolutions.net>, documentation available at
+ * http://johannes.sipsolutions.net/PowerBook/Apple_Motion_Sensor_Specification
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "ams.h"
+
+/* AMS registers */
+#define AMS_COMMAND 0x00 /* command register */
+#define AMS_STATUS 0x01 /* status register */
+#define AMS_CTRL1 0x02 /* read control 1 (number of values) */
+#define AMS_CTRL2 0x03 /* read control 2 (offset?) */
+#define AMS_CTRL3 0x04 /* read control 3 (size of each value?) */
+#define AMS_DATA1 0x05 /* read data 1 */
+#define AMS_DATA2 0x06 /* read data 2 */
+#define AMS_DATA3 0x07 /* read data 3 */
+#define AMS_DATA4 0x08 /* read data 4 */
+#define AMS_DATAX 0x20 /* data X */
+#define AMS_DATAY 0x21 /* data Y */
+#define AMS_DATAZ 0x22 /* data Z */
+#define AMS_FREEFALL 0x24 /* freefall int control */
+#define AMS_SHOCK 0x25 /* shock int control */
+#define AMS_SENSLOW 0x26 /* sensitivity low limit */
+#define AMS_SENSHIGH 0x27 /* sensitivity high limit */
+#define AMS_CTRLX 0x28 /* control X */
+#define AMS_CTRLY 0x29 /* control Y */
+#define AMS_CTRLZ 0x2A /* control Z */
+#define AMS_UNKNOWN1 0x2B /* unknown 1 */
+#define AMS_UNKNOWN2 0x2C /* unknown 2 */
+#define AMS_UNKNOWN3 0x2D /* unknown 3 */
+#define AMS_VENDOR 0x2E /* vendor */
+
+/* AMS commands - use with the AMS_COMMAND register */
+enum ams_i2c_cmd {
+ AMS_CMD_NOOP = 0,
+ AMS_CMD_VERSION,
+ AMS_CMD_READMEM,
+ AMS_CMD_WRITEMEM,
+ AMS_CMD_ERASEMEM,
+ AMS_CMD_READEE,
+ AMS_CMD_WRITEEE,
+ AMS_CMD_RESET,
+ AMS_CMD_START,
+};
+
+static int ams_i2c_attach(struct i2c_adapter *adapter);
+static int ams_i2c_detach(struct i2c_adapter *adapter);
+
+static struct i2c_driver ams_i2c_driver = {
+ .driver = {
+ .name = "ams",
+ .owner = THIS_MODULE,
+ },
+ .attach_adapter = ams_i2c_attach,
+ .detach_adapter = ams_i2c_detach,
+};
+
+static s32 ams_i2c_read(u8 reg)
+{
+ return i2c_smbus_read_byte_data(&ams.i2c_client, reg);
+}
+
+static int ams_i2c_write(u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(&ams.i2c_client, reg, value);
+}
+
+static int ams_i2c_cmd(enum ams_i2c_cmd cmd)
+{
+ s32 result;
+ int i;
+
+ ams_i2c_write(AMS_COMMAND, cmd);
+ for (i = 0; i < 10; i++) {
+ mdelay(5);
+ result = ams_i2c_read(AMS_COMMAND);
+ if (result == 0 || result & 0x80)
+ return 0;
+ }
+ return -1;
+}
+
+static void ams_i2c_set_irq(enum ams_irq reg, char enable)
+{
+ if (reg & AMS_IRQ_FREEFALL) {
+ u8 val = ams_i2c_read(AMS_CTRLX);
+ if (enable) val |= 0x80;
+ else val &= ~0x80;
+ ams_i2c_write(AMS_CTRLX, val);
+ }
+
+ if (reg & AMS_IRQ_SHOCK) {
+ u8 val = ams_i2c_read(AMS_CTRLY);
+ if (enable) val |= 0x80;
+ else val &= ~0x80;
+ ams_i2c_write(AMS_CTRLY, val);
+ }
+
+ if (reg & AMS_IRQ_GLOBAL) {
+ u8 val = ams_i2c_read(AMS_CTRLZ);
+ if (enable) val |= 0x80;
+ else val &= ~0x80;
+ ams_i2c_write(AMS_CTRLZ, val);
+ }
+}
+
+static void ams_i2c_clear_irq(enum ams_irq reg)
+{
+ if (reg & AMS_IRQ_FREEFALL)
+ ams_i2c_write(AMS_FREEFALL, 0);
+
+ if (reg & AMS_IRQ_SHOCK)
+ ams_i2c_write(AMS_SHOCK, 0);
+}
+
+static u8 ams_i2c_get_vendor(void)
+{
+ return ams_i2c_read(AMS_VENDOR);
+}
+
+static void ams_i2c_get_xyz(s8 *x, s8 *y, s8 *z)
+{
+ *x = ams_i2c_read(AMS_DATAX);
+ *y = ams_i2c_read(AMS_DATAY);
+ *z = ams_i2c_read(AMS_DATAZ);
+}
+
+static int ams_i2c_attach(struct i2c_adapter *adapter)
+{
+ unsigned long bus;
+ int vmaj, vmin;
+ int result;
+
+ /* There can be only one */
+ if (unlikely(ams.has_device))
+ return -ENODEV;
+
+ if (strncmp(adapter->name, "uni-n", 5))
+ return -ENODEV;
+
+ bus = simple_strtoul(adapter->name + 6, NULL, 10);
+ if (bus != ams.i2c_bus)
+ return -ENODEV;
+
+ ams.i2c_client.addr = ams.i2c_address;
+ ams.i2c_client.adapter = adapter;
+ ams.i2c_client.driver = &ams_i2c_driver;
+ strcpy(ams.i2c_client.name, "Apple Motion Sensor");
+
+ if (ams_i2c_cmd(AMS_CMD_RESET)) {
+ printk(KERN_INFO "ams: Failed to reset the device\n");
+ return -ENODEV;
+ }
+
+ if (ams_i2c_cmd(AMS_CMD_START)) {
+ printk(KERN_INFO "ams: Failed to start the device\n");
+ return -ENODEV;
+ }
+
+ /* get version/vendor information */
+ ams_i2c_write(AMS_CTRL1, 0x02);
+ ams_i2c_write(AMS_CTRL2, 0x85);
+ ams_i2c_write(AMS_CTRL3, 0x01);
+
+ ams_i2c_cmd(AMS_CMD_READMEM);
+
+ vmaj = ams_i2c_read(AMS_DATA1);
+ vmin = ams_i2c_read(AMS_DATA2);
+ if (vmaj != 1 || vmin != 52) {
+ printk(KERN_INFO "ams: Incorrect device version (%d.%d)\n",
+ vmaj, vmin);
+ return -ENODEV;
+ }
+
+ ams_i2c_cmd(AMS_CMD_VERSION);
+
+ vmaj = ams_i2c_read(AMS_DATA1);
+ vmin = ams_i2c_read(AMS_DATA2);
+ if (vmaj != 0 || vmin != 1) {
+ printk(KERN_INFO "ams: Incorrect firmware version (%d.%d)\n",
+ vmaj, vmin);
+ return -ENODEV;
+ }
+
+ /* Disable interrupts */
+ ams_i2c_set_irq(AMS_IRQ_ALL, 0);
+
+ result = ams_sensor_attach();
+ if (result < 0)
+ return result;
+
+ /* Set default values */
+ ams_i2c_write(AMS_SENSLOW, 0x15);
+ ams_i2c_write(AMS_SENSHIGH, 0x60);
+ ams_i2c_write(AMS_CTRLX, 0x08);
+ ams_i2c_write(AMS_CTRLY, 0x0F);
+ ams_i2c_write(AMS_CTRLZ, 0x4F);
+ ams_i2c_write(AMS_UNKNOWN1, 0x14);
+
+ /* Clear interrupts */
+ ams_i2c_clear_irq(AMS_IRQ_ALL);
+
+ ams.has_device = 1;
+
+ /* Enable interrupts */
+ ams_i2c_set_irq(AMS_IRQ_ALL, 1);
+
+ printk(KERN_INFO "ams: Found I2C based motion sensor\n");
+
+ return 0;
+}
+
+static int ams_i2c_detach(struct i2c_adapter *adapter)
+{
+ if (ams.has_device) {
+ /* Disable interrupts */
+ ams_i2c_set_irq(AMS_IRQ_ALL, 0);
+
+ /* Clear interrupts */
+ ams_i2c_clear_irq(AMS_IRQ_ALL);
+
+ printk(KERN_INFO "ams: Unloading\n");
+
+ ams.has_device = 0;
+ }
+
+ return 0;
+}
+
+static void ams_i2c_exit(void)
+{
+ i2c_del_driver(&ams_i2c_driver);
+}
+
+int __init ams_i2c_init(struct device_node *np)
+{
+ char *tmp_bus;
+ int result;
+ u32 *prop;
+
+ mutex_lock(&ams.lock);
+
+ /* Set implementation stuff */
+ ams.of_node = np;
+ ams.exit = ams_i2c_exit;
+ ams.get_vendor = ams_i2c_get_vendor;
+ ams.get_xyz = ams_i2c_get_xyz;
+ ams.clear_irq = ams_i2c_clear_irq;
+ ams.bustype = BUS_I2C;
+
+ /* look for bus either using "reg" or by path */
+ prop = (u32*)get_property(ams.of_node, "reg", NULL);
+ if (!prop) {
+ result = -ENODEV;
+
+ goto exit;
+ }
+
+ tmp_bus = strstr(ams.of_node->full_name, "/i2c-bus@");
+ if (tmp_bus)
+ ams.i2c_bus = *(tmp_bus + 9) - '0';
+ else
+ ams.i2c_bus = ((*prop) >> 8) & 0x0f;
+ ams.i2c_address = ((*prop) & 0xff) >> 1;
+
+ result = i2c_add_driver(&ams_i2c_driver);
+
+exit:
+ mutex_unlock(&ams.lock);
+
+ return result;
+}
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams-mouse.c linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams-mouse.c
--- linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams-mouse.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams-mouse.c 2006-07-15 22:28:59.000000000 +0200
@@ -0,0 +1,145 @@
+/*
+ * Apple Motion Sensor driver (mouse emulation)
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian at popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel at hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "ams.h"
+
+static unsigned int mouse;
+module_param(mouse, bool, 0644);
+MODULE_PARM_DESC(mouse, "Enable the input class device on module load");
+
+static int ams_mouse_kthread(void *data)
+{
+ s8 x, y, z;
+
+ while (!kthread_should_stop()) {
+ mutex_lock(&ams.lock);
+
+ ams_sensors(&x, &y, &z);
+
+ input_report_abs(ams.idev, ABS_X, x - ams.xcalib);
+ input_report_abs(ams.idev, ABS_Y, y - ams.ycalib);
+ input_report_abs(ams.idev, ABS_Z, z - ams.zcalib);
+
+ input_sync(ams.idev);
+
+ mutex_unlock(&ams.lock);
+
+ msleep(25);
+ }
+
+ return 0;
+}
+
+/* Call with lock held! */
+static void ams_mouse_enable(void)
+{
+ s8 x, y, z;
+
+ if (ams.idev)
+ return;
+
+ ams_sensors(&x, &y, &z);
+ ams.xcalib = x;
+ ams.ycalib = y;
+ ams.zcalib = z;
+
+ ams.idev = input_allocate_device();
+ if (!ams.idev)
+ return;
+
+ ams.idev->name = "Apple Motion Sensor";
+ ams.idev->id.bustype = ams.bustype;
+ ams.idev->id.vendor = 0;
+ ams.idev->cdev.dev = &ams.of_dev->dev;
+
+ input_set_abs_params(ams.idev, ABS_X, -50, 50, 3, 0);
+ input_set_abs_params(ams.idev, ABS_Y, -50, 50, 3, 0);
+ input_set_abs_params(ams.idev, ABS_Z, -50, 50, 3, 0);
+
+ set_bit(EV_ABS, ams.idev->evbit);
+ set_bit(EV_KEY, ams.idev->evbit);
+
+ if (input_register_device(ams.idev)) {
+ input_free_device(ams.idev);
+ ams.idev = NULL;
+ return;
+ }
+
+ ams.kthread = kthread_run(ams_mouse_kthread, NULL, "kams");
+ if (IS_ERR(ams.kthread)) {
+ input_unregister_device(ams.idev);
+ ams.idev = NULL;
+ return;
+ }
+}
+
+/* Call with lock held! */
+static void ams_mouse_disable(void)
+{
+ if (ams.idev) {
+ kthread_stop(ams.kthread);
+ input_unregister_device(ams.idev);
+ ams.idev = NULL;
+ }
+}
+
+static ssize_t ams_mouse_show_mouse(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", mouse);
+}
+
+static ssize_t ams_mouse_store_mouse(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ if (sscanf(buf, "%d\n", &mouse) != 1)
+ return -EINVAL;
+
+ mouse = !!mouse;
+
+ mutex_lock(&ams.lock);
+
+ if (mouse)
+ ams_mouse_enable();
+ else
+ ams_mouse_disable();
+
+ mutex_unlock(&ams.lock);
+
+ return count;
+}
+
+static DEVICE_ATTR(mouse, S_IRUGO | S_IWUSR,
+ ams_mouse_show_mouse, ams_mouse_store_mouse);
+
+/* Call with lock held! */
+void ams_mouse_init()
+{
+ device_create_file(&ams.of_dev->dev, &dev_attr_mouse);
+
+ if (mouse)
+ ams_mouse_enable();
+}
+
+/* Call with lock held! */
+void ams_mouse_exit()
+{
+ ams_mouse_disable();
+ device_remove_file(&ams.of_dev->dev, &dev_attr_mouse);
+}
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams-pmu.c linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams-pmu.c
--- linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/ams-pmu.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.18-rc1-git10/drivers/hwmon/ams/ams-pmu.c 2006-07-15 22:28:59.000000000 +0200
@@ -0,0 +1,202 @@
+/*
+ * Apple Motion Sensor driver (PMU variant)
+ *
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel at hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+
+#include "ams.h"
+
+/* Attitude */
+#define AMS_X 0x00
+#define AMS_Y 0x01
+#define AMS_Z 0x02
+
+/* Not exactly known, maybe chip vendor */
+#define AMS_VENDOR 0x03
+
+/* Freefall registers */
+#define AMS_FF_CLEAR 0x04
+#define AMS_FF_ENABLE 0x05
+#define AMS_FF_LOW_LIMIT 0x06
+#define AMS_FF_DEBOUNCE 0x07
+
+/* Shock registers */
+#define AMS_SHOCK_CLEAR 0x08
+#define AMS_SHOCK_ENABLE 0x09
+#define AMS_SHOCK_HIGH_LIMIT 0x0a
+#define AMS_SHOCK_DEBOUNCE 0x0b
+
+/* Global interrupt and power control register */
+#define AMS_CONTROL 0x0c
+
+static u8 ams_pmu_cmd;
+
+static void ams_pmu_req_complete(struct adb_request *req)
+{
+ complete((struct completion *)req->arg);
+}
+
+/* Only call this function from task context */
+static void ams_pmu_set_register(u8 reg, u8 value)
+{
+ static struct adb_request req;
+ DECLARE_COMPLETION(req_complete);
+
+ req.arg = &req_complete;
+ if (pmu_request(&req, ams_pmu_req_complete, 4, ams_pmu_cmd, 0x00, reg, value))
+ return;
+
+ wait_for_completion(&req_complete);
+}
+
+/* Only call this function from task context */
+static u8 ams_pmu_get_register(u8 reg)
+{
+ static struct adb_request req;
+ DECLARE_COMPLETION(req_complete);
+
+ req.arg = &req_complete;
+ if (pmu_request(&req, ams_pmu_req_complete, 3, ams_pmu_cmd, 0x01, reg))
+ return 0;
+
+ wait_for_completion(&req_complete);
+
+ if (req.reply_len > 0)
+ return req.reply[0];
+ else
+ return 0;
+}
+
+/* Enables or disables the specified interrupts */
+static void ams_pmu_set_irq(enum ams_irq reg, char enable)
+{
+ if (reg & AMS_IRQ_FREEFALL) {
+ u8 val = ams_pmu_get_register(AMS_FF_ENABLE);
+ if (enable) val |= 0x80;
+ else val &= ~0x80;
+ ams_pmu_set_register(AMS_FF_ENABLE, val);
+ }
+
+ if (reg & AMS_IRQ_SHOCK) {
+ u8 val = ams_pmu_get_register(AMS_SHOCK_ENABLE);
+ if (enable) val |= 0x80;
+ else val &= ~0x80;
+ ams_pmu_set_register(AMS_SHOCK_ENABLE, val);
+ }
+
+ if (reg & AMS_IRQ_GLOBAL) {
+ u8 val = ams_pmu_get_register(AMS_CONTROL);
+ if (enable) val |= 0x80;
+ else val &= ~0x80;
+ ams_pmu_set_register(AMS_CONTROL, val);
+ }
+}
+
+static void ams_pmu_clear_irq(enum ams_irq reg)
+{
+ if (reg & AMS_IRQ_FREEFALL)
+ ams_pmu_set_register(AMS_FF_CLEAR, 0x00);
+
+ if (reg & AMS_IRQ_SHOCK)
+ ams_pmu_set_register(AMS_SHOCK_CLEAR, 0x00);
+}
+
+static u8 ams_pmu_get_vendor(void)
+{
+ return ams_pmu_get_register(AMS_VENDOR);
+}
+
+static void ams_pmu_get_xyz(s8 *x, s8 *y, s8 *z)
+{
+ *x = ams_pmu_get_register(AMS_X);
+ *y = ams_pmu_get_register(AMS_Y);
+ *z = ams_pmu_get_register(AMS_Z);
+}
+
+static void ams_pmu_exit(void)
+{
+ /* Disable interrupts */
+ ams_pmu_set_irq(AMS_IRQ_ALL, 0);
+
+ /* Clear interrupts */
+ ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+ ams.has_device = 0;
+
+ printk(KERN_INFO "ams: Unloading\n");
+}
+
+/* Call with lock held! */
+int __init ams_pmu_init(struct device_node *np)
+{
+ u32 *prop;
+ int result;
+
+ mutex_lock(&ams.lock);
+
+ /* Set implementation stuff */
+ ams.of_node = np;
+ ams.exit = ams_pmu_exit;
+ ams.get_vendor = ams_pmu_get_vendor;
+ ams.get_xyz = ams_pmu_get_xyz;
+ ams.clear_irq = ams_pmu_clear_irq;
+ ams.bustype = BUS_HOST;
+
+ /* Get PMU command, should be 0x4e, but we can never know */
+ prop = (u32*)get_property(ams.of_node, "reg", NULL);
+ if (!prop) {
+ result = -ENODEV;
+ goto exit;
+ }
+ ams_pmu_cmd = ((*prop) >> 8) & 0xff;
+
+ /* Disable interrupts */
+ ams_pmu_set_irq(AMS_IRQ_ALL, 0);
+
+ /* Clear interrupts */
+ ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+ result = ams_sensor_attach();
+ if (result < 0)
+ goto exit;
+
+ /* Set default values */
+ ams_pmu_set_register(AMS_FF_LOW_LIMIT, 0x15);
+ ams_pmu_set_register(AMS_FF_ENABLE, 0x08);
+ ams_pmu_set_register(AMS_FF_DEBOUNCE, 0x14);
+
+ ams_pmu_set_register(AMS_SHOCK_HIGH_LIMIT, 0x60);
+ ams_pmu_set_register(AMS_SHOCK_ENABLE, 0x0f);
+ ams_pmu_set_register(AMS_SHOCK_DEBOUNCE, 0x14);
+
+ ams_pmu_set_register(AMS_CONTROL, 0x4f);
+
+ /* Clear interrupts */
+ ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+ ams.has_device = 1;
+
+ /* Enable interrupts */
+ ams_pmu_set_irq(AMS_IRQ_ALL, 1);
+
+ printk(KERN_INFO "ams: Found PMU based motion sensor\n");
+
+ result = 0;
+
+exit:
+ mutex_unlock(&ams.lock);
+
+ return result;
+}
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/Makefile linux-2.6.18-rc1-git10/drivers/hwmon/ams/Makefile
--- linux-2.6.18-rc1-git10.orig/drivers/hwmon/ams/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.18-rc1-git10/drivers/hwmon/ams/Makefile 2006-07-15 22:28:59.000000000 +0200
@@ -0,0 +1,8 @@
+#
+# Makefile for Apple Motion Sensor driver
+#
+
+ams-y := ams-core.o ams-mouse.o
+ams-$(CONFIG_SENSORS_AMS_PMU) += ams-pmu.o
+ams-$(CONFIG_SENSORS_AMS_I2C) += ams-i2c.o
+obj-$(CONFIG_SENSORS_AMS) += ams.o
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1-git10.orig/drivers/hwmon/Kconfig linux-2.6.18-rc1-git10/drivers/hwmon/Kconfig
--- linux-2.6.18-rc1-git10.orig/drivers/hwmon/Kconfig 2006-07-15 22:23:35.000000000 +0200
+++ linux-2.6.18-rc1-git10/drivers/hwmon/Kconfig 2006-07-15 22:36:20.000000000 +0200
@@ -94,6 +94,29 @@ config SENSORS_ADM9240
This driver can also be built as a module. If so, the module
will be called adm9240.
+config SENSORS_AMS
+ tristate "Apple Motion Sensor driver"
+ depends on HWMON && PPC_PMAC && INPUT && EXPERIMENTAL
+ default y
+ help
+ Support for the motion sensor included in PowerBooks. Includes
+ implementations for PMU and I2C.
+
+config SENSORS_AMS_PMU
+ bool "PMU variant"
+ depends on SENSORS_AMS && ADB_PMU
+ default y
+ help
+ PMU variant of motion sensor, found in late 2005 PowerBooks.
+
+config SENSORS_AMS_I2C
+ bool "I2C variant"
+ depends on SENSORS_AMS && I2C
+ default y
+ help
+ I2C variant of motion sensor, found in early 2005 PowerBooks and
+ iBooks.
+
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on HWMON && I2C && EXPERIMENTAL
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1-git10.orig/drivers/hwmon/Makefile linux-2.6.18-rc1-git10/drivers/hwmon/Makefile
--- linux-2.6.18-rc1-git10.orig/drivers/hwmon/Makefile 2006-07-15 22:23:35.000000000 +0200
+++ linux-2.6.18-rc1-git10/drivers/hwmon/Makefile 2006-07-15 22:28:59.000000000 +0200
@@ -18,6 +18,7 @@ obj-$(CONFIG_SENSORS_ADM1025) += adm1025
obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
+obj-$(CONFIG_SENSORS_AMS) += ams/
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
