Hi guys!
I trying with fancontrol on my Tyan S2466N motherboard.
Sensors work properly but I can't control the FANs, this example both of
the fans speed is 0 because they disconnected atm :)
w83782d-i2c-0-2d
Adapter: SMBus AMD768 adapter at 80e0
VCore 1: +1.63 V (min = +1.57 V, max = +1.73 V)
VCore 2: +1.68 V (min = +1.57 V, max = +1.73 V)
+3.3V: +1.54 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +4.84 V (min = +4.73 V, max = +5.24 V)
+12V: +4.62 V (min = +10.82 V, max = +13.19 V) ALARM
-12V: -2.33 V (min = -13.18 V, max = -10.88 V) ALARM
-5V: +2.64 V (min = -5.25 V, max = -4.75 V) ALARM
V5SB: +4.25 V (min = +4.73 V, max = +5.24 V) ALARM
VBat: +3.26 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 21093 RPM, div = 4) ALARM
fan2: 0 RPM (min = -1 RPM, div = 4) ALARM
fan3: 0 RPM (min = 168750 RPM, div = 4) ALARM
temp1: +81 C (high = +8 C, hyst = -62 C) sensor =
thermistor ALARM
temp2: +79.5 C (high = +80 C, hyst = +75 C) sensor =
thermistor
temp3: +79.0 C (high = +80 C, hyst = +75 C) sensor =
thermistor
vid: +1.650 V (VRM Version 9.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm enabled
w83627hf-isa-0c00
Adapter: ISA adapter
VCore 1: +1.62 V (min = +0.00 V, max = +0.00 V) ALARM
VCore 2: +1.65 V (min = +0.00 V, max = +0.00 V) ALARM
+3.3V: +3.34 V (min = +3.14 V, max = +3.47 V)
+5V: +5.08 V (min = +4.76 V, max = +5.24 V)
+12V: +9.42 V (min = +10.82 V, max = +13.19 V) ALARM
-12V: -11.95 V (min = -13.18 V, max = -10.80 V)
-5V: +0.33 V (min = -5.25 V, max = -4.75 V) ALARM
V5SB: +5.59 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +2.32 V (min = +2.40 V, max = +3.60 V) ALARM
fan1: 0 RPM (min = 7670 RPM, div = 2) ALARM
fan2: 0 RPM (min = 3479 RPM, div = 2) ALARM
fan3: 0 RPM (min = 4623 RPM, div = 2) ALARM
temp1: +77 C (high = +53 C, hyst = +80 C) sensor =
thermistor
temp2: +79.0 C (high = +80 C, hyst = +75 C) sensor =
thermistor
temp3: +76.5 C (high = +80 C, hyst = +75 C) sensor =
thermistor
Is there anyone who can make it work with my motherboard or somethink
like this from tyan?
The problem not lm-sensors specific because I get the same with speedfan
or motherboard monitor app in windows. I tryed to search but I go
nowhere with google. Bios upgrade also impossible if it would be the
problem, because tyan doesn't support this board anymore. The board has
6 fan connectors and I tried all but still the same results.
Regards,
Jax
