On Sunday 09 July 2006 15:38, lm-sensors wrote: > #2090: Request for support of winbon pc87591 chipset > ----------------------------------+---------------------------------------- >- Reporter: mcbrides9 at comcast.net | Owner: somebody > Type: enhancement | Status: closed > Priority: major | Component: hardware > Version: | Resolution: wontfix > Keywords: | > ----------------------------------+---------------------------------------- >- Changes (by ruik): > > * status: new => closed > * resolution: => wontfix > > Comment: > > Hello, > > Well bad news for you. We found out that we cannot support the chip. The > sensors are connected to the embedded controller, but the interface to > host CPU of sensors is not standtized - it depends of embedded cotroller > programming. > > I would suggest to use ACPI module called "thermal" > modprobe thermal > acpi -V > > Those command should show you the CPU temp. > I hope it helps, > > Regards > Rudolf Yep. I dug around and pretty much found the same thing. I was hoping that someone on lm-sensors knew how to program the controller... Thank you, for your time Jerry