OK, I have tried reading documentation, following
the flowchart, and searching the mailing list, the
site, and the entire web to try to figure out what
I have. I just don't get it. :(
I have decided to finally ask for help from the list.
Let me know if I have forgotten anything.
# uname -mpr
2.6.16-gentoo-r6 i686 Pentium III (Coppermine)
# equery list lm_sensors
[ Searching for package 'lm_sensors' in all categories among: ]
* installed packages
[I--] [ ] sys-apps/lm_sensors-2.10.0 (0)
# lsmod
Module Size Used by
hwmon_vid 1984 0
i2c_isa 3072 0
# /usr/sbin/sensors-detect
# sensors-detect revision 1.413 (2006/01/19 20:28:00)
This program will help you determine which I2C/SMBus modules you need
to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things
may
seem a bit confusing, but they will still work.
It is generally safe and recommended to accept the default answers to
all
questions, unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-i810' for device 00:01.0: Intel 82810E GMCH
Use driver `i2c-i801' for device 00:1f.3: Intel 82801AA ICH
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Load `i2c-i810' (say NO if built into your kernel)? (YES/no): n
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): n
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no): n
Well, you will know best. We will just hope you edited
`/etc/modules.conf'
for automatic loading of this module. If not,
you won't be able to open any /dev/i2c-* file (unless youhave it
built-in
into your kernel)
We are now going to do the adapter probings. Some adapters may hang
halfway
through; we can't really help that. Also, some chips will be double
detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address,
you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus I801 adapter at dcd0
Do you want to scan it? (YES/no/selectively):
Client found at address 0x31
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for `DDC monitor'... Failed!
Probing for `Maxim MAX6900'... Failed!
Client found at address 0x51
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x69
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no):
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Failed!
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (0xe411)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0xe411)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0xe411)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Success... but not activated
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87591 Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PC87371 Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PC97371 Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PC8739x Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PCPC87427 Super IO'
Failed! (0xe4)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47M15x/192/997 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47M172 Super IO'
Failed! (0xe4)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0xe4)
Probing for `SMSC SCH5307-NS Super IO'
Failed! (0xe4)
Probing for `VT1211 Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83687THF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0xe4)
Probing for `Winbond W83L517D Super IO'
Failed! (0xe4)
Probing for `Fintek F71805F/FG Super IO Sensors'
Failed! (0xe411)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (0xe411)
Do you want to scan for secondary Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (skipping family)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at dcd0'
Busdriver `i2c-i801', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at dcd0'
Busdriver `i2c-i801', I2C address 0x51
Chip `SPD EEPROM' (confidence: 8)
I will now generate the commands needed to load the I2C modules.
If you want to load the modules at startup, generate a config file
below and make sure lm_sensors gets started at boot time; e.g
$ rc-update add lm_sensors default
To make the sensors modules behave correctly, add these lines to
/etc/modules.d/lm_sensors and run modules-update:
#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----end cut here----
WARNING! If you have some things built into your kernel, the list above
will contain too many modules. Skip the appropriate ones! You really
should
try these commands right now to make sure everything is working
properly.
Monitoring programs won't work until it's done.
To load everything that is needed, execute the commands below...
#----cut here----
# I2C adapter drivers
modprobe i2c-i801
# I2C chip drivers
modprobe eeprom
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----end cut here----
Do you want to generate /etc/conf.d/lm_sensors? Enter s to specify
other file name?
(YES/no/s): n
# modprobe eeprom
# lsmod
Module Size Used by
eeprom 5040 0
hwmon_vid 1984 0
i2c_isa 3072 0
# /usr/sbin/sensors-detect
# sensors-detect revision 1.413 (2006/01/19 20:28:00)
This program will help you determine which I2C/SMBus modules you need
to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things
may
seem a bit confusing, but they will still work.
It is generally safe and recommended to accept the default answers to
all
questions, unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-i810' for device 00:01.0: Intel 82810E GMCH
Use driver `i2c-i801' for device 00:1f.3: Intel 82801AA ICH
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Load `i2c-i810' (say NO if built into your kernel)? (YES/no): n
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): n
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no): n
Well, you will know best. We will just hope you edited
`/etc/modules.conf'
for automatic loading of this module. If not,
you won't be able to open any /dev/i2c-* file (unless youhave it
built-in
into your kernel)
We are now going to do the adapter probings. Some adapters may hang
halfway
through; we can't really help that. Also, some chips will be double
detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address,
you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus I801 adapter at dcd0
Do you want to scan it? (YES/no/selectively):
Client found at address 0x31
Client at address 0x50 can not be probed - unload all client drivers
first!
Client at address 0x51 can not be probed - unload all client drivers
first!
Client found at address 0x69
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no):
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Failed!
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (0xe411)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0xe411)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0xe411)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Success... but not activated
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `Nat. Semi. PC87591 Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PC87371 Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PC97371 Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PC8739x Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0xe4)
Probing for `Nat. Semi. PCPC87427 Super IO'
Failed! (0xe4)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47M15x/192/997 Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0xe4)
Probing for `SMSC 47M172 Super IO'
Failed! (0xe4)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0xe4)
Probing for `SMSC SCH5307-NS Super IO'
Failed! (0xe4)
Probing for `VT1211 Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83687THF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0xe4)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0xe4)
Probing for `Winbond W83L517D Super IO'
Failed! (0xe4)
Probing for `Fintek F71805F/FG Super IO Sensors'
Failed! (0xe411)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (0xe411)
Do you want to scan for secondary Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (skipping family)
Sorry, no chips were detected.
Either your sensors are not supported, or they are
connected to an I2C bus adapter that we do not support.
See doc/FAQ, doc/lm_sensors-FAQ.html, or
http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/doc/lm_sensors-FAQ.html
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, see
http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
# i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and
worse!
I will probe file /dev/i2c/0.
I will probe address range 0x03-0x77.
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: XX XX XX XX XX XX XX XX XX XX XX XX XX
10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
30: XX 31 XX XX XX XX XX XX XX XX XX XX XX XX XX XX
40: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
50: UU UU XX XX XX XX XX XX XX XX XX XX XX XX XX XX
60: XX XX XX XX XX XX XX XX XX 69 XX XX XX XX XX XX
70: XX XX XX XX XX XX XX XX
# /usr/sbin/i2cdump 0 0x50
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and
worse!
I will probe file /dev/i2c/0, address 0x50, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 80 08 04 0c 0a 02 40 00 01 a0 60 00 80 08 00 01 ??????@.??`.??.?
10: 8f 04 06 01 01 00 0e a0 60 00 00 14 14 14 32 20 ?????.??`..???2
20: 20 10 20 10 00 00 00 00 00 00 00 00 00 00 00 00 ? ?............
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 17 ..............??
40: 7f 98 00 00 00 00 00 00 04 20 33 32 4d 58 36 34 ??......? 32MX64
50: 50 43 31 30 30 43 4c 32 31 36 38 50 20 03 02 04 PC100CL2168P ???
60: 0f 9b 07 00 00 00 00 00 00 00 00 00 00 00 00 00 ???.............
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 f7 ..............d?
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: 39 39 30 35 31 32 31 2d 30 32 35 2e 61 30 32 00 9905121-025.a02.
# /usr/sbin/i2cdump 0 0x51
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and
worse!
I will probe file /dev/i2c/0, address 0x51, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 80 08 04 0c 09 02 40 00 01 a0 60 00 80 08 00 01 ??????@.??`.??.?
10: 8f 04 06 01 01 00 0e a0 60 ff ff 14 10 14 2d 10 ?????.??`..???-?
20: 20 10 20 10 ff ff ff ff ff ff ff ff ff ff ff ff ? ?............
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 12 e1 ..............??
40: c1 49 4e 46 49 4e 45 4f 09 48 59 53 36 34 56 31 ?INFINEO?HYS64V1
50: 36 32 32 30 47 55 2d 38 ff ff ff 01 02 00 22 01 6220GU-8...??."?
60: 06 c4 86 ff ff ff ff ff ff ff ff ff ff ff ff ff ???.............
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 64 ff ..............d.
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
Thank you in advance for your help.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
