Content-Disposition: inline; filename=i2c-nforce2-add-mcp51-mcp55-support.patch
Add support for the new nForce4 MCP51 (also known as nForce 410 or
430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes
were required because the base I/O address registers have changed in
these versions. Standard BARs are now being used, while the original
nForce2 chips used non-standard ones.
Signed-off-by: Jean Delvare <khali at linux-fr.org>
---
Documentation/i2c/busses/i2c-nforce2 | 2 ++
drivers/i2c/busses/i2c-nforce2.c | 38 ++++++++++++++++++++++++----------
include/linux/pci_ids.h | 2 ++
3 files changed, 31 insertions(+), 11 deletions(-)
--- linux-2.6.17-rc2.orig/drivers/i2c/busses/i2c-nforce2.c 2006-04-24 19:24:01.000000000 +0200
+++ linux-2.6.17-rc2/drivers/i2c/busses/i2c-nforce2.c 2006-04-25 12:22:17.000000000 +0200
@@ -31,6 +31,8 @@
nForce3 250Gb MCP 00E4
nForce4 MCP 0052
nForce4 MCP-04 0034
+ nForce4 MCP51 0264
+ nForce4 MCP55 0368
This driver supports the 2 SMBuses that are included in the MCP of the
nForce2/3/4 chipsets.
@@ -64,6 +66,7 @@
/*
* nVidia nForce2 SMBus control register definitions
+ * (Newer incarnations use standard BARs 4 and 5 instead)
*/
#define NFORCE_PCI_SMB1 0x50
#define NFORCE_PCI_SMB2 0x54
@@ -259,6 +262,8 @@
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS) },
{ 0 }
};
@@ -266,19 +271,29 @@
MODULE_DEVICE_TABLE (pci, nforce2_ids);
-static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg,
- struct nforce2_smbus *smbus, char *name)
+static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
+ int alt_reg, struct nforce2_smbus *smbus, const char *name)
{
- u16 iobase;
int error;
- if (pci_read_config_word(dev, reg, &iobase) != PCIBIOS_SUCCESSFUL) {
- dev_err(&smbus->adapter.dev, "Error reading PCI config for %s\n", name);
- return -1;
+ smbus->base = pci_resource_start(dev, bar);
+ if (smbus->base) {
+ smbus->size = pci_resource_len(dev, bar);
+ } else {
+ /* Older incarnations of the device used non-standard BARs */
+ u16 iobase;
+
+ if (pci_read_config_word(dev, alt_reg, &iobase)
+ != PCIBIOS_SUCCESSFUL) {
+ dev_err(&dev->dev, "Error reading PCI config for %s\n",
+ name);
+ return -1;
+ }
+
+ smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK;
+ smbus->size = 8;
}
- smbus->dev = dev;
- smbus->base = iobase & 0xfffc;
- smbus->size = 8;
+ smbus->dev = dev;
if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
@@ -313,12 +328,13 @@
pci_set_drvdata(dev, smbuses);
/* SMBus adapter 1 */
- res1 = nforce2_probe_smb (dev, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
+ res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
if (res1 < 0) {
dev_err(&dev->dev, "Error probing SMB1.\n");
smbuses[0].base = 0; /* to have a check value */
}
- res2 = nforce2_probe_smb (dev, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
+ /* SMBus adapter 2 */
+ res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
if (res2 < 0) {
dev_err(&dev->dev, "Error probing SMB2.\n");
smbuses[1].base = 0; /* to have a check value */
--- linux-2.6.17-rc2.orig/include/linux/pci_ids.h 2006-04-25 09:44:30.000000000 +0200
+++ linux-2.6.17-rc2/include/linux/pci_ids.h 2006-04-25 12:21:54.000000000 +0200
@@ -1129,9 +1129,11 @@
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS 0x0264
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS 0x0368
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE 0x036E
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA 0x037E
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2 0x037F
--- linux-2.6.17-rc2.orig/Documentation/i2c/busses/i2c-nforce2 2006-04-24 19:24:01.000000000 +0200
+++ linux-2.6.17-rc2/Documentation/i2c/busses/i2c-nforce2 2006-04-25 12:22:26.000000000 +0200
@@ -7,6 +7,8 @@
* nForce3 250Gb MCP 10de:00E4
* nForce4 MCP 10de:0052
* nForce4 MCP-04 10de:0034
+ * nForce4 MCP51 10de:0264
+ * nForce4 MCP55 10de:0368
Datasheet: not publically available, but seems to be similar to the
AMD-8111 SMBus 2.0 adapter.
--
Jean Delvare
