Make the w83792d driver keep quiet when misdetecting a chip. This can
happen, and the user doesn't need to know.
Also renumber the messages, and add one, for consistency.
Signed-off-by: Jean Delvare <khali at linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/hwmon/w83792d.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
ac987c1f65cedd98d953e14ba219db2f8cc009d4
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 6865c64..958602e 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -1161,7 +1161,7 @@ w83792d_detect(struct i2c_adapter *adapt
bank. */
if (kind < 0) {
if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
- dev_warn(dev, "Detection failed at step 3\n");
+ dev_dbg(dev, "Detection failed at step 1\n");
goto ERROR1;
}
val1 = w83792d_read_value(client, W83792D_REG_BANK);
@@ -1170,6 +1170,7 @@ w83792d_detect(struct i2c_adapter *adapt
if (!(val1 & 0x07)) { /* is Bank0 */
if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
((val1 & 0x80) && (val2 != 0x5c))) {
+ dev_dbg(dev, "Detection failed at step 2\n");
goto ERROR1;
}
}
@@ -1177,7 +1178,7 @@ w83792d_detect(struct i2c_adapter *adapt
should match */
if (w83792d_read_value(client,
W83792D_REG_I2C_ADDR) != address) {
- dev_warn(dev, "Detection failed at step 5\n");
+ dev_dbg(dev, "Detection failed at step 3\n");
goto ERROR1;
}
}
--
1.2.6
