Resend...
---
The m41t00 i2c/rtc driver currently uses a tasklet to schedule
interrupt-level writes to the rtc. This patch causes the driver
to use a workqueue instead.
Signed-off-by: Mark A. Greer <mgreer at mvista.com>
---
m41t00.c | 16 +++++++++-------
1 files changed, 9 insertions(+), 7 deletions(-)
---
diff -Nurp linux-2.6.16-mm1/drivers/i2c/chips/m41t00.c linux-2.6.16-mm1-wq/drivers/i2c/chips/m41t00.c
--- linux-2.6.16-mm1/drivers/i2c/chips/m41t00.c 2006-03-23 15:04:55.000000000 -0700
+++ linux-2.6.16-mm1-wq/drivers/i2c/chips/m41t00.c 2006-03-27 15:29:35.000000000 -0700
@@ -25,6 +25,7 @@
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/mutex.h>
+#include <linux/workqueue.h>
#include <asm/time.h>
#include <asm/rtc.h>
@@ -111,7 +112,7 @@ m41t00_get_rtc_time(void)
}
static void
-m41t00_set_tlet(ulong arg)
+m41t00_set(void *arg)
{
struct rtc_time tm;
ulong nowtime = *(ulong *)arg;
@@ -145,9 +146,9 @@ m41t00_set_tlet(ulong arg)
return;
}
-static ulong new_time;
-
-DECLARE_TASKLET_DISABLED(m41t00_tasklet, m41t00_set_tlet, (ulong)&new_time);
+static ulong new_time;
+static struct workqueue_struct *m41t00_wq;
+static DECLARE_WORK(m41t00_work, m41t00_set, &new_time);
int
m41t00_set_rtc_time(ulong nowtime)
@@ -155,9 +156,9 @@ m41t00_set_rtc_time(ulong nowtime)
new_time = nowtime;
if (in_interrupt())
- tasklet_schedule(&m41t00_tasklet);
+ queue_work(m41t00_wq, &m41t00_work);
else
- m41t00_set_tlet((ulong)&new_time);
+ m41t00_set(&new_time);
return 0;
}
@@ -189,6 +190,7 @@ m41t00_probe(struct i2c_adapter *adap, i
return rc;
}
+ m41t00_wq = create_singlethread_workqueue("m41t00");
save_client = client;
return 0;
}
@@ -206,7 +208,7 @@ m41t00_detach(struct i2c_client *client)
if ((rc = i2c_detach_client(client)) == 0) {
kfree(client);
- tasklet_kill(&m41t00_tasklet);
+ destroy_workqueue(m41t00_wq);
}
return rc;
}
