I'll paste in what my motherboard reports for the readings with alarm status. On 2/18/06, Jean Delvare <khali at linux-fr.org> wrote: > > -5V: -5.35 V (min = -5.25 V, max = -4.75 V) ALARM -5.0V: -5.327V > > V5SB: +5.56 V (min = +4.76 V, max = +5.24 V) ALARM +5V SB: 5.042V > This will still not make it for 5VSB though; it would need 15%, which I > admit is a bit too much. Are there values displayed for these voltages > in the BIOS setup screen? If so, do the values there match the ones > displayed by "sensors"? I re-ran sensors and it still reports 5.59 V for V5SB but my BIOS says 5.042V. > > temp1: +30?C (high = -86?C, hyst = +59?C) sensor = > thermistor > I'd guess the limits for temp1 were simply never initialized. I checked and there is only a section for CPU critical temperature. I cannot set the system temperature limit. Thanks!
