Content-Disposition: inline; filename=i2c-drop-frodo.patch
Drop the i2c-frodo bus driver. It isn't referenced by the build
system, and depends on code which was never included in 2.6 kernels.
Signed-off-by: Jean Delvare <khali at linux-fr.org>
---
drivers/i2c/busses/i2c-frodo.c | 85 ----------------------------------------
include/linux/i2c-id.h | 1 -
2 files changed, 86 deletions(-)
--- linux-2.6.16-rc1.orig/drivers/i2c/busses/i2c-frodo.c 2006-01-21 10:42:40.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,85 +0,0 @@
-
-/*
- * linux/drivers/i2c/i2c-frodo.c
- *
- * Author: Abraham van der Merwe <abraham at 2d3d.co.za>
- *
- * An I2C adapter driver for the 2d3D, Inc. StrongARM SA-1110
- * Development board (Frodo).
- *
- * This source code is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/hardware.h>
-
-
-static void frodo_setsda (void *data,int state)
-{
- if (state)
- FRODO_CPLD_I2C |= FRODO_I2C_SDA_OUT;
- else
- FRODO_CPLD_I2C &= ~FRODO_I2C_SDA_OUT;
-}
-
-static void frodo_setscl (void *data,int state)
-{
- if (state)
- FRODO_CPLD_I2C |= FRODO_I2C_SCL_OUT;
- else
- FRODO_CPLD_I2C &= ~FRODO_I2C_SCL_OUT;
-}
-
-static int frodo_getsda (void *data)
-{
- return ((FRODO_CPLD_I2C & FRODO_I2C_SDA_IN) != 0);
-}
-
-static int frodo_getscl (void *data)
-{
- return ((FRODO_CPLD_I2C & FRODO_I2C_SCL_IN) != 0);
-}
-
-static struct i2c_algo_bit_data bit_frodo_data = {
- .setsda = frodo_setsda,
- .setscl = frodo_setscl,
- .getsda = frodo_getsda,
- .getscl = frodo_getscl,
- .udelay = 80,
- .mdelay = 80,
- .timeout = HZ
-};
-
-static struct i2c_adapter frodo_ops = {
- .owner = THIS_MODULE,
- .id = I2C_HW_B_FRODO,
- .algo_data = &bit_frodo_data,
- .dev = {
- .name = "Frodo adapter driver",
- },
-};
-
-static int __init i2c_frodo_init (void)
-{
- return i2c_bit_add_bus(&frodo_ops);
-}
-
-static void __exit i2c_frodo_exit (void)
-{
- i2c_bit_del_bus(&frodo_ops);
-}
-
-MODULE_AUTHOR ("Abraham van der Merwe <abraham at 2d3d.co.za>");
-MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo");
-MODULE_LICENSE ("GPL");
-
-module_init (i2c_frodo_init);
-module_exit (i2c_frodo_exit);
-
--- linux-2.6.16-rc1.orig/include/linux/i2c-id.h 2006-01-18 18:29:23.000000000 +0100
+++ linux-2.6.16-rc1/include/linux/i2c-id.h 2006-01-21 10:43:27.000000000 +0100
@@ -172,7 +172,6 @@
#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */
#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */
#define I2C_HW_B_TSUNA 0x010012 /* DEC Tsunami chipset */
-#define I2C_HW_B_FRODO 0x010013 /* 2d3D SA-1110 Development Board */
#define I2C_HW_B_OMAHA 0x010014 /* Omaha I2C interface (ARM) */
#define I2C_HW_B_GUIDE 0x010015 /* Guide bit-basher */
#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */
--
Jean Delvare
