Hi,
I've just installed 'lm_sensors' on a dual AMD Opteron 248 on a
motherboard with AMD 8000 chipset. I am concerned about an error
message I get when I run 'sensors'. Is this condition OK or, should I
do anything to fix it?
Here is the output.
[root at argon ~]# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +1.54 V (min = +0.00 V, max = +0.00 V)
VCore 2: +1.54 V (min = +0.00 V, max = +0.00 V)
+3.3V: +3.38 V (min = +3.14 V, max = +3.47 V)
+5V: +5.08 V (min = +4.76 V, max = +5.24 V)
+12V: +4.86 V (min = +10.82 V, max = +13.19 V)
-12V: -1.59 V (min = -13.18 V, max = -10.80 V)
-5V: -3.79 V (min = -5.25 V, max = -4.75 V)
V5SB: +5.73 V (min = +4.76 V, max = +5.24 V)
VBat: +2.42 V (min = +2.40 V, max = +3.60 V)
fan1: 7758 RPM (min = 11065 RPM, div = 2)
fan2: 7500 RPM (min = 3214 RPM, div = 2)
fan3: 4326 RPM (min = 2860 RPM, div = 8)
Ambient: +35?C (high = +40?C, hyst = +37?C) sensor =
thermistor
CPU1: +35.5?C (high = +52?C, hyst = +47?C) sensor =
thermistor
CPU2: +40.5?C (high = +52?C, hyst = +47?C) sensor =
thermistor
ERROR: Can't get VID data!
alarms:
beep_enable:
Sound alarm disabled
