scx200_acb: Minimal documentation update Signed-off-by: Ben Gardner <bgardner at wabtec.com> --- New and improved - now includes Kconfig updates! -------------- next part -------------- Documentation/i2c/busses/scx200_acb | 5 +++-- drivers/i2c/busses/Kconfig | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) --- linux-2.6.15-rc5-mm3.orig/Documentation/i2c/busses/scx200_acb +++ linux-2.6.15-rc5-mm3/Documentation/i2c/busses/scx200_acb @@ -6,9 +6,10 @@ Module Parameters ----------------- * base: int - Base addresses for the ACCESS.bus controllers + Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices Description ----------- -Enable the use of the ACCESS.bus controllers of a SCx200 processor. +Enable the use of the ACCESS.bus controller on the Geode SCx200 and +SC1100 processors and the CS5535 and CS5536 Geode companion devices. --- linux-2.6.15-rc5-mm3.orig/drivers/i2c/busses/Kconfig +++ linux-2.6.15-rc5-mm3/drivers/i2c/busses/Kconfig @@ -398,10 +398,11 @@ config SCx200_I2C_SDA also be specified with a module parameter. config SCx200_ACB - tristate "NatSemi SCx200 ACCESS.bus" + tristate "Geode ACCESS.bus support" depends on I2C && PCI help - Enable the use of the ACCESS.bus controllers of a SCx200 processor. + Enable the use of the ACCESS.bus controllers on the Geode SCx200 and + SC1100 processors and the CS5535 and CS5536 Geode companion devices. If you don't know what to do here, say N.
