Added mention of the CS5535 and CS5536 and noted that the 'base' module parameter is only used for the scx200 and sc1100. Signed-off-by: Ben Gardner <bgardner at wabtec.com> -------------- next part -------------- Documentation/i2c/busses/scx200_acb | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) --- linux-2.6.15-rc5-mm1.orig/Documentation/i2c/busses/scx200_acb +++ linux-2.6.15-rc5-mm1/Documentation/i2c/busses/scx200_acb @@ -6,9 +6,10 @@ Module Parameters ----------------- * base: int - Base addresses for the ACCESS.bus controllers + Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices Description ----------- -Enable the use of the ACCESS.bus controllers of a SCx200 processor. +Enable the use of the ACCESS.bus controllers of SCx200, SC1100, CS5535, and +CS5536 Geode CPU companion devices.
