On Fri, Dec 02, 2005 at 09:57:51AM +0100, Rudolf Marek wrote:
> Hello,
>
> Now I'm suspecting the miniBMC is watching the chip ;)
Hmm, I thought so for a while as well. Now I'm not that sure any
longer...
> Please have you some CD with windows health utillity?
Sorry, no. I actually don't even have Windows on this machine at
all... I suppose I could add another drive to the system and install
Windows just for this purpose, but that it quite the task to I'd
rather avoid it unless you know this will tell us something that is
impossible to get some other way...
> Can you share output of sensors-detect with us?
> (please use CVS version of it, you dont need to install just run ./sensors-detect)
>
Sure, that's a lot easier...
# sensors-detect revision 1.404 (2005/11/26 11:28:44)
This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.
It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 00:1f.3: Intel ICH7
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Module `i2c-i801' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is already loaded.
We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus I801 adapter at 3080
Do you want to scan it? (YES/no/selectively):
Client found at address 0x08
Client found at address 0x2c
Probing for `Myson MTP008'... Failed!
Probing for `National Semiconductor LM78'... Failed!
Probing for `National Semiconductor LM78-J'... Failed!
Probing for `National Semiconductor LM79'... Failed!
Probing for `National Semiconductor LM80'... Failed!
Probing for `National Semiconductor LM85 or LM96000'... Failed!
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... Failed!
Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... Failed!
Probing for `Analog Devices ADT7476'... Failed!
Probing for `National Semiconductor LM87'... Failed!
Probing for `National Semiconductor LM93'... Failed!
Probing for `Winbond W83781D'... Failed!
Probing for `Winbond W83782D'... Failed!
Probing for `Winbond W83791D'... Failed!
Probing for `Winbond W83792D'... Success!
(confidence 7, driver `w83792d'), other addresses: 0x48 0x4c
Probing for `Winbond W83791SD'... Failed!
Probing for `Winbond W83627HF'... Failed!
Probing for `Winbond W83627EHF'... Failed!
Probing for `Asus AS99127F (rev.1)'... Failed!
Probing for `Asus AS99127F (rev.2)'... Failed!
Probing for `Asus ASB100 Bach'... Failed!
Probing for `Genesys Logic GL518SM Revision 0x00'... Failed!
Probing for `Genesys Logic GL518SM Revision 0x80'... Failed!
Probing for `Genesys Logic GL520SM'... Failed!
Probing for `Analog Devices ADM9240'... Failed!
Probing for `Dallas Semiconductor DS1780'... Failed!
Probing for `National Semiconductor LM81'... Failed!
Probing for `Analog Devices ADM1026'... Failed!
Probing for `Analog Devices ADM1025'... Failed!
Probing for `Philips NE1619'... Failed!
Probing for `Analog Devices ADM1024'... Failed!
Probing for `Analog Devices ADM1029'... Failed!
Probing for `Analog Devices ADM1030'... Failed!
Probing for `Analog Devices ADM1031'... Failed!
Probing for `Analog Devices ADM1022'... Failed!
Probing for `Texas Instruments THMC50'... Failed!
Probing for `ITE IT8712F'... Failed!
Probing for `ALi M5879'... Failed!
Probing for `SMSC LPC47M15x, LPC47M192 or LPC47M997'... Failed!
Client found at address 0x31
Client found at address 0x33
Client found at address 0x44
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Client found at address 0x48
Probing for `National Semiconductor LM75'... Failed!
Probing for `National Semiconductor LM77'... Failed!
Probing for `Dallas Semiconductor DS1621'... Failed!
Probing for `Maxim MAX6650/MAX6651'... Failed!
Probing for `National Semiconductor LM92'... Failed!
Probing for `National Semiconductor LM76'... Failed!
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Client found at address 0x4c
Probing for `National Semiconductor LM75'... Failed!
Probing for `Dallas Semiconductor DS1621'... Failed!
Probing for `Analog Devices ADM1021'... Failed!
Probing for `Analog Devices ADM1021A/ADM1023'... Failed!
Probing for `Maxim MAX1617'... Failed!
Probing for `Maxim MAX1617A'... Failed!
Probing for `TI THMC10'... Failed!
Probing for `National Semiconductor LM84'... Failed!
Probing for `Genesys Logic GL523SM'... Failed!
Probing for `Onsemi MC1066'... Failed!
Probing for `Maxim MAX1619'... Failed!
Probing for `National Semiconductor LM82/LM83'... Failed!
Probing for `National Semiconductor LM90'... Failed!
Probing for `National Semiconductor LM89/LM99'... Failed!
Probing for `National Semiconductor LM86'... Failed!
Probing for `Analog Devices ADM1032'... Failed!
Probing for `Maxim MAX6657/MAX6658/MAX6659'... Failed!
Probing for `National Semiconductor LM63'... Failed!
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Probing for `Analog Devices ADT7461'... Failed!
Client found at address 0x51
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x53
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x60
Client found at address 0x61
Probing for `SMBus 2.0 ARP-Capable Device'... Success!
(confidence 1, driver `smbus-arp')
Client found at address 0x69
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no):
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Success!
(confidence 8, driver `it87')
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (0x8712)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0x8712)
Probing for `ITE 8712F Super IO Sensors'
Success... found at address 0x0290
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (skipping family)
Do you want to scan for secondary Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (skipping family)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83792d' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 3080'
Busdriver `i2c-i801', I2C address 0x2c (and 0x48 0x4c)
Chip `Winbond W83792D' (confidence: 7)
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 3080'
Busdriver `i2c-i801', I2C address 0x51
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at 3080'
Busdriver `i2c-i801', I2C address 0x53
Chip `SPD EEPROM' (confidence: 8)
Driver `smbus-arp' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 3080'
Busdriver `i2c-i801', I2C address 0x61
Chip `SMBus 2.0 ARP-Capable Device' (confidence: 1)
Driver `it87' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `ITE 8712F Super IO Sensors' (confidence: 9)
I will now generate the commands needed to load the I2C modules.
Sometimes, a chip is available both through the ISA bus and an I2C bus.
ISA bus access is faster, but you need to load an additional driver module
for it. If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)?
To make the sensors modules behave correctly, add these lines to
/etc/modules.conf:
#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----
To load everything that is needed, add this to some /etc/rc* file:
#----cut here----
# I2C adapter drivers
modprobe i2c-i801
modprobe i2c-isa
# I2C chip drivers
modprobe w83792d
modprobe eeprom
# Warning: the required module smbus-arp is not currently installed on your system.
# For status of 2.6 kernel ports see http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the following line.
modprobe smbus-arp
modprobe it87
# sleep 2 # optional
/usr/local/bin/sensors -s # recommended
#----cut here----
WARNING! If you have some things built into your kernel, the list above
will contain too many modules. Skip the appropriate ones! You really should
try these commands right now to make sure everything is working properly.
Monitoring programs won't work until it's done.
Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO):
> Also can you confirm if you have onboard the PC87431 chip?
I've been looking, but I can't find such a chip... I actually don't
think that this mini BMC think is more then a software feature of the
BIOS that can read the sensor limits. But then again I may be wrong...
Here's a pointer to the manual:
http://us.giga-byte.com/Download/Download.asp?DownloadPath=/Server/FileList/Manual/4mxsv_1001.pdf
This is from the manual:
Hardware Monitor
*Winbond 83792D controller
*Enhanced features with CPU Vcore, 1.5V reference, VCC3 (3.3V),
VCC5V, +12V, 2.5V,VBAT3V, +5V SB, CPU Temperature, and
System Temperature Values viewing by
*Support basic ASF remote transaction through CSA Bus with hardware
circuit
BIOS
*Phoenix BIOS on 8Mb flash RAM
*Software mini BMC
Note that second bullet under Hardware Monitor actually ends in
"by"... I don't know what this CSA bus thing is though?
I received an answer from Gigabyte, they told me to refer to the
system block diagram in the manual for the W83792D chip is connected
in my system. Well that's not very useful since the W82792D isn't even
on the system block diagram...
Thanks
Daniel Nilsson
