Howard Wang wrote: > Hi Rudolf, > > I got the scx200_i2c driver working on the second i2c bus, which is acb1, > however, when I use i2cset and i2cdump, it seems that only 128 bytes is > accessible, it repeats after 128 bytes, while my device is: > microchip 24AA128 which is 128K bits (16K bytes). see attached log: > in fact, I just set the first 10 bytes and it repeats after 128 bytes. > > any suggestions ? I'm in hury, must go back to my hometown, so just quick note before I leave: Perhaps it uses two bytes addressing. You will need special driver for it Hoever some driver that works for 16KBit eeproms is here. (somewhere in this thread) http://lists.lm-sensors.org/pipermail/lm-sensors/2005-July/012987.html Maybe you can take a look and extend it to your needs. I can take a look ttoday in evening or at weekend. Regards Rudolf
