Hello,
This patch adds the VIA CENTAUR CPUs to detection table.
Table was updated to treat future Intel x86 CPUs as VRD10.
Stepping field was added, because some VIA CPUs have
different VRM specs across stepping.
Please apply.
Signed-Off-By: Rudolf Marek <r.marek at sh.cvut.cz>
Thanks,
Regards
Rudolf
diff -Naur a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
--- a/drivers/hwmon/hwmon-vid.c 2005-10-28 02:02:08.000000000 +0200
+++ b/drivers/hwmon/hwmon-vid.c 2005-11-05 19:35:58.306905250 +0100
@@ -49,6 +49,11 @@
. . . .
11110 = 0.800 V
11111 = 0.000 V (off)
+
+ The 1718 specification is in fact Intel Mobile Voltage Positioning -
+ (IMVP-II). You can find more information in the datasheet of Max1718
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
+
*/
/* vrm is the VRM/VRD document version multiplied by 10.
@@ -60,9 +65,6 @@
switch(vrm) {
- case 0:
- return 0;
-
case 100: /* VRD 10.0 */
if((val & 0x1f) == 0x1f)
return 0;
@@ -91,10 +93,16 @@
case 84: /* VRM 8.4 */
val &= 0x0f;
/* fall through */
- default: /* VRM 8.2 */
+ case 82: /* VRM 8.2 */
return(val == 0x1f ? 0 :
val & 0x10 ? 5100 - (val) * 100 :
2050 - (val) * 50);
+ case 1718: /* Intel IMVP-II */
+ return(val & 0x10 ? 975 - (val & 0xF) * 25 :
+ 1750 - val * 50);
+ default: /* report 0 for unknown */
+ printk(KERN_INFO "hwmon-vid: requested unknown VRM version\n");
+ return 0;
}
}
@@ -108,6 +116,7 @@
u8 vendor;
u8 eff_family;
u8 eff_model;
+ u8 eff_stepping;
int vrm_type;
};
@@ -115,23 +124,28 @@
#ifdef CONFIG_X86
+/* the stepping parameter is highest acceptable stepping for current line */
+
static struct vrm_model vrm_models[] = {
- {X86_VENDOR_AMD, 0x6, ANY, 90}, /* Athlon Duron etc */
- {X86_VENDOR_AMD, 0xF, ANY, 24}, /* Athlon 64, Opteron */
- {X86_VENDOR_INTEL, 0x6, 0x9, 85}, /* 0.13um too */
- {X86_VENDOR_INTEL, 0x6, 0xB, 85}, /* Tualatin */
- {X86_VENDOR_INTEL, 0x6, ANY, 82}, /* any P6 */
- {X86_VENDOR_INTEL, 0x7, ANY, 0}, /* Itanium */
- {X86_VENDOR_INTEL, 0xF, 0x0, 90}, /* P4 */
- {X86_VENDOR_INTEL, 0xF, 0x1, 90}, /* P4 Willamette */
- {X86_VENDOR_INTEL, 0xF, 0x2, 90}, /* P4 Northwood */
- {X86_VENDOR_INTEL, 0xF, 0x3, 100}, /* P4 Prescott */
- {X86_VENDOR_INTEL, 0xF, 0x4, 100}, /* P4 Prescott */
- {X86_VENDOR_INTEL, 0x10,ANY, 0}, /* Itanium 2 */
- {X86_VENDOR_UNKNOWN, ANY, ANY, 0} /* stop here */
+ {X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */
+ {X86_VENDOR_AMD, 0xF, ANY, ANY, 24}, /* Athlon 64, Opteron and above VRM 24 */
+ {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 85}, /* 0.13um too */
+ {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */
+ {X86_VENDOR_INTEL, 0x6, ANY, ANY, 82}, /* any P6 */
+ {X86_VENDOR_INTEL, 0x7, ANY, ANY, 0}, /* Itanium */
+ {X86_VENDOR_INTEL, 0xF, 0x0, ANY, 90}, /* P4 */
+ {X86_VENDOR_INTEL, 0xF, 0x1, ANY, 90}, /* P4 Willamette */
+ {X86_VENDOR_INTEL, 0xF, 0x2, ANY, 90}, /* P4 Northwood */
+ {X86_VENDOR_INTEL, 0xF, ANY, ANY, 100}, /* Prescott and above assume VRD 10 */
+ {X86_VENDOR_INTEL, 0x10, ANY, ANY, 0}, /* Itanium 2 */
+ {X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */
+ {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */
+ {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nemiah */
+ {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 1718}, /* C3-M */
+ {X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0} /* stop here */
};
-static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
+static int find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
{
int i = 0;
@@ -139,7 +153,8 @@
if (vrm_models[i].vendor==vendor)
if ((vrm_models[i].eff_family==eff_family)
&& ((vrm_models[i].eff_model==eff_model) ||
- (vrm_models[i].eff_model==ANY)))
+ (vrm_models[i].eff_model==ANY)) &&
+ (eff_stepping <= vrm_models[i].eff_stepping))
return vrm_models[i].vrm_type;
i++;
}
@@ -151,7 +166,7 @@
{
struct cpuinfo_x86 *c = cpu_data;
u32 eax;
- u8 eff_family, eff_model;
+ u8 eff_family, eff_model, eff_stepping;
int vrm_ret;
if (c->x86 < 6) /* Any CPU with family lower than 6 */
@@ -160,18 +175,19 @@
eax = cpuid_eax(1);
eff_family = ((eax & 0x00000F00)>>8);
eff_model = ((eax & 0x000000F0)>>4);
+ eff_stepping = eax & 0xF;
if (eff_family == 0xF) { /* use extended model & family */
eff_family += ((eax & 0x00F00000)>>20);
eff_model += ((eax & 0x000F0000)>>16)<<4;
}
- vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor);
+ vrm_ret = find_vrm(eff_family, eff_model, eff_stepping, c->x86_vendor);
if (vrm_ret == 0)
printk(KERN_INFO "hwmon-vid: Unknown VRM version of your "
"x86 CPU\n");
return vrm_ret;
}
-/* and now something completely different for the non-x86 world */
+/* and now for something completely different for the non-x86 world */
#else
int vid_which_vrm(void)
{
