Thanks again Mark;
-Craig
Mark M. Hoffman wrote:
>This patch adds a new ID to the SMSC LPC47B397-NC hardware
>monitoring driver - for a chip that is claimed to be 100%
>compatible otherwise.
>
>Signed-off-by: Bryan Young (Utilitek Systems, Inc.)
>Signed-off-by: Mark M. Hoffman <mhoffman at lightlink.com>
>
>---
>
>Hi Jean: I should have sent this some time ago. Please queue it
>up for 2.6.15.
>
>--- linux-2.6.14-rc2-mm2.orig/drivers/hwmon/smsc47b397.c
>+++ linux-2.6.14-rc2-mm2/drivers/hwmon/smsc47b397.c
>@@ -299,7 +299,7 @@ static int __init smsc47b397_find(unsign
> superio_enter();
> id = superio_inb(SUPERIO_REG_DEVID);
>
>- if (id != 0x6f) {
>+ if ((id != 0x6f) && (id != 0x81)) {
> superio_exit();
> return -ENODEV;
> }
>@@ -310,8 +310,16 @@ static int __init smsc47b397_find(unsign
> *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
> | superio_inb(SUPERIO_REG_BASE_LSB);
>
>- printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC "
>- "(base address 0x%04x, revision %u)\n", *addr, rev);
>+ switch (id) {
>+ case 0x6f:
>+ printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC "
>+ "(base address 0x%04x, revision %u)\n", *addr, rev);
>+ break;
>+ case 0x81:
>+ printk(KERN_INFO "smsc47b397: found SMSC SCH5307-NS"
>+ "(base address 0x%04x, revision %u)\n", *addr, rev);
>+ break;
>+ }
>
> superio_exit();
> return 0;
>
>
--
Craig Kelley
In-Store Broadcasting Network
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20051012/f95f4419/attachment.html
