hwmon: adm9240 update 1/2: cleanups:
o remove i2c read/write wrapper interface as it does nothing,
o change kmalloc + memset to kzalloc
Signed-off-by: Grant Coady <gcoady at gmail.com>
---
adm9240.c | 92 +++++++++++++++++++++++++++++---------------------------------
1 files changed, 44 insertions(+), 48 deletions(-)
--- linux-2.6.14-rc1b/drivers/hwmon/adm9240.c-whitespace 2005-09-14 07:10:45.000000000 +1000
+++ linux-2.6.14-rc1b/drivers/hwmon/adm9240.c 2005-09-15 08:15:18.000000000 +1000
@@ -170,17 +170,6 @@
u8 vrm; /* -- vrm set on startup, no accessor */
};
-/* i2c byte read/write interface */
-static int adm9240_read_value(struct i2c_client *client, u8 reg)
-{
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int adm9240_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
/*** sysfs accessors ***/
/* temperature */
@@ -207,7 +196,7 @@
\
down(&data->update_lock); \
data->value = TEMP_TO_REG(temp); \
- adm9240_write_value(client, reg, data->value); \
+ i2c_smbus_write_byte_data(client, reg, data->value); \
up(&data->update_lock); \
return count; \
}
@@ -249,7 +238,8 @@
down(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val, nr);
- adm9240_write_value(client, ADM9240_REG_IN_MIN(nr), data->in_min[nr]);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(nr),
+ data->in_min[nr]);
up(&data->update_lock);
return count;
}
@@ -263,7 +253,8 @@
down(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val, nr);
- adm9240_write_value(client, ADM9240_REG_IN_MAX(nr), data->in_max[nr]);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(nr),
+ data->in_max[nr]);
up(&data->update_lock);
return count;
}
@@ -341,11 +332,11 @@
{
u8 reg, old, shift = (nr + 2) * 2;
- reg = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
+ reg = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
old = (reg >> shift) & 3;
reg &= ~(3 << shift);
reg |= (fan_div << shift);
- adm9240_write_value(client, ADM9240_REG_VID_FAN_DIV, reg);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg);
dev_dbg(&client->dev, "fan%d clock divider changed from %u "
"to %u\n", nr + 1, 1 << old, 1 << fan_div);
}
@@ -406,7 +397,7 @@
data->fan_div[nr] = new_div;
adm9240_write_fan_div(client, nr, new_div);
}
- adm9240_write_value(client, ADM9240_REG_FAN_MIN(nr),
+ i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr),
data->fan_min[nr]);
up(&data->update_lock);
@@ -483,7 +474,7 @@
down(&data->update_lock);
data->aout = AOUT_TO_REG(val);
- adm9240_write_value(client, ADM9240_REG_ANALOG_OUT, data->aout);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout);
up(&data->update_lock);
return count;
}
@@ -497,7 +488,8 @@
unsigned long val = simple_strtol(buf, NULL, 10);
if (val == 1) {
- adm9240_write_value(client, ADM9240_REG_CHASSIS_CLEAR, 0x80);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_CHASSIS_CLEAR, 0x80);
dev_dbg(&client->dev, "chassis intrusion latch cleared\n");
}
return count;
@@ -518,11 +510,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct adm9240_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct adm9240_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -538,7 +529,7 @@
if (kind < 0) {
/* verify chip: reg address should match i2c address */
- if (adm9240_read_value(new_client, ADM9240_REG_I2C_ADDR)
+ if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR)
!= address) {
dev_err(&adapter->dev, "detect fail: address match, "
"0x%02x\n", address);
@@ -546,8 +537,8 @@
}
/* check known chip manufacturer */
- man_id = adm9240_read_value(new_client, ADM9240_REG_MAN_ID);
-
+ man_id = i2c_smbus_read_byte_data(new_client,
+ ADM9240_REG_MAN_ID);
if (man_id == 0x23) {
kind = adm9240;
} else if (man_id == 0xda) {
@@ -561,7 +552,8 @@
}
/* successful detect, print chip info */
- die_rev = adm9240_read_value(new_client, ADM9240_REG_DIE_REV);
+ die_rev = i2c_smbus_read_byte_data(new_client,
+ ADM9240_REG_DIE_REV);
dev_info(&adapter->dev, "found %s revision %u\n",
man_id == 0x23 ? "ADM9240" :
man_id == 0xda ? "DS1780" : "LM81", die_rev);
@@ -659,8 +651,8 @@
static void adm9240_init_client(struct i2c_client *client)
{
struct adm9240_data *data = i2c_get_clientdata(client);
- u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG);
- u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3;
+ u8 conf = i2c_smbus_read_byte_data(client, ADM9240_REG_CONFIG);
+ u8 mode = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_CONF) & 3;
data->vrm = vid_which_vrm(); /* need this to report vid as mV */
@@ -677,18 +669,22 @@
for (i = 0; i < 6; i++)
{
- adm9240_write_value(client,
+ i2c_smbus_write_byte_data(client,
ADM9240_REG_IN_MIN(i), 0);
- adm9240_write_value(client,
+ i2c_smbus_write_byte_data(client,
ADM9240_REG_IN_MAX(i), 255);
}
- adm9240_write_value(client, ADM9240_REG_FAN_MIN(0), 255);
- adm9240_write_value(client, ADM9240_REG_FAN_MIN(1), 255);
- adm9240_write_value(client, ADM9240_REG_TEMP_HIGH, 127);
- adm9240_write_value(client, ADM9240_REG_TEMP_HYST, 127);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_FAN_MIN(0), 255);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_FAN_MIN(1), 255);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_TEMP_HIGH, 127);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_TEMP_HYST, 127);
/* start measurement cycle */
- adm9240_write_value(client, ADM9240_REG_CONFIG, 1);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1);
dev_info(&client->dev, "cold start: config was 0x%02x "
"mode %u\n", conf, mode);
@@ -709,25 +705,25 @@
for (i = 0; i < 6; i++) /* read voltages */
{
- data->in[i] = adm9240_read_value(client,
+ data->in[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_IN(i));
}
- data->alarms = adm9240_read_value(client,
+ data->alarms = i2c_smbus_read_byte_data(client,
ADM9240_REG_INT(0)) |
- adm9240_read_value(client,
+ i2c_smbus_read_byte_data(client,
ADM9240_REG_INT(1)) << 8;
/* read temperature: assume temperature changes less than
* 0.5'C per two measurement cycles thus ignore possible
* but unlikely aliasing error on lsb reading. --Grant */
- data->temp = ((adm9240_read_value(client,
+ data->temp = ((i2c_smbus_read_byte_data(client,
ADM9240_REG_TEMP) << 8) |
- adm9240_read_value(client,
+ i2c_smbus_read_byte_data(client,
ADM9240_REG_TEMP_CONF)) / 128;
for (i = 0; i < 2; i++) /* read fans */
{
- data->fan[i] = adm9240_read_value(client,
+ data->fan[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_FAN(i));
/* adjust fan clock divider on overflow */
@@ -752,30 +748,30 @@
for (i = 0; i < 6; i++)
{
- data->in_min[i] = adm9240_read_value(client,
+ data->in_min[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_IN_MIN(i));
- data->in_max[i] = adm9240_read_value(client,
+ data->in_max[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_IN_MAX(i));
}
for (i = 0; i < 2; i++)
{
- data->fan_min[i] = adm9240_read_value(client,
+ data->fan_min[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_FAN_MIN(i));
}
- data->temp_high = adm9240_read_value(client,
+ data->temp_high = i2c_smbus_read_byte_data(client,
ADM9240_REG_TEMP_HIGH);
- data->temp_hyst = adm9240_read_value(client,
+ data->temp_hyst = i2c_smbus_read_byte_data(client,
ADM9240_REG_TEMP_HYST);
/* read fan divs and 5-bit VID */
- i = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
+ i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
data->fan_div[0] = (i >> 4) & 3;
data->fan_div[1] = (i >> 6) & 3;
data->vid = i & 0x0f;
- data->vid |= (adm9240_read_value(client,
+ data->vid |= (i2c_smbus_read_byte_data(client,
ADM9240_REG_VID4) & 1) << 4;
/* read analog out */
- data->aout = adm9240_read_value(client,
+ data->aout = i2c_smbus_read_byte_data(client,
ADM9240_REG_ANALOG_OUT);
data->last_updated_config = jiffies;
