[PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (8/9)
Kill all uses of i2c_is_isa_adapter except for the hybrid drivers (it87,
lm78, w83781d). The i2c-isa adapter not being registered with the i2c
core anymore, drivers don't have to fear being erroneously attached to
it.
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
commit 02ff982c6911de1484e13a1d765d7bd31a0f8fee
tree 94e8c388df0de6561da7f10840f4e87dead18724
parent 5071860aba7fc69279ab822638ed2c2e4549f9fd
author Jean Delvare <khali at linux-fr.org> Wed, 20 Jul 2005 00:05:33 +0200
committer Greg Kroah-Hartman <gregkh at suse.de> Mon, 05 Sep 2005 09:14:12 -0700
Documentation/i2c/writing-clients | 11 +++++------
drivers/hwmon/adm1021.c | 9 ---------
drivers/hwmon/asb100.c | 8 --------
drivers/hwmon/lm75.c | 10 ----------
drivers/hwmon/lm85.c | 5 -----
5 files changed, 5 insertions(+), 38 deletions(-)
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -315,11 +315,10 @@ For now, you can ignore the `flags' para
const char *type_name = "";
int is_isa = i2c_is_isa_adapter(adapter);
- if (is_isa) {
+ /* Do this only if the chip can additionally be found on the ISA bus
+ (hybrid chip). */
- /* If this client can't be on the ISA bus at all, we can stop now
- (call `goto ERROR0'). But for kicks, we will assume it is all
- right. */
+ if (is_isa) {
/* Discard immediately if this ISA range is already used */
if (check_region(address,FOO_EXTENT))
@@ -495,10 +494,10 @@ much simpler than the attachment code, f
return err;
}
- /* SENSORS ONLY START */
+ /* HYBRID SENSORS CHIP ONLY START */
if i2c_is_isa_client(client)
release_region(client->addr,LM78_EXTENT);
- /* SENSORS ONLY END */
+ /* HYBRID SENSORS CHIP ONLY END */
kfree(client); /* Frees client data too, if allocated at the same time */
return 0;
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -198,15 +198,6 @@ static int adm1021_detect(struct i2c_ada
int err = 0;
const char *type_name = "";
- /* Make sure we aren't probing the ISA bus!! This is just a safety check
- at this moment; i2c_detect really won't call us. */
-#ifdef DEBUG
- if (i2c_is_isa_adapter(adapter)) {
- dev_dbg(&adapter->dev, "adm1021_detect called for an ISA bus adapter?!?\n");
- return 0;
- }
-#endif
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto error0;
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -714,14 +714,6 @@ static int asb100_detect(struct i2c_adap
struct i2c_client *new_client;
struct asb100_data *data;
- /* asb100 is SMBus only */
- if (i2c_is_isa_adapter(adapter)) {
- pr_debug("asb100.o: detect failed, "
- "cannot attach to legacy adapter!\n");
- err = -ENODEV;
- goto ERROR0;
- }
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("asb100.o: detect failed, "
"smbus byte data not supported!\n");
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -121,16 +121,6 @@ static int lm75_detect(struct i2c_adapte
int err = 0;
const char *name = "";
- /* Make sure we aren't probing the ISA bus!! This is just a safety check
- at this moment; i2c_detect really won't call us. */
-#ifdef DEBUG
- if (i2c_is_isa_adapter(adapter)) {
- dev_dbg(&adapter->dev,
- "lm75_detect called for an ISA bus adapter?!?\n");
- goto exit;
- }
-#endif
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
goto exit;
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1033,11 +1033,6 @@ int lm85_detect(struct i2c_adapter *adap
int err = 0;
const char *type_name = "";
- if (i2c_is_isa_adapter(adapter)) {
- /* This chip has no ISA interface */
- goto ERROR0 ;
- };
-
if (!i2c_check_functionality(adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
/* We need to be able to do byte I/O */
