Hi Jean, On Sun, 4 Sep 2005 15:04:41 +0200, Jean Delvare <khali at linux-fr.org> wrote: > >Oh, did I mention that you needed to load i2c-isa then? root at silly:~# modprobe i2c_isa root at silly:~# sensors lm78-isa-0290 Adapter: ISA adapter VCore 1: +2.03 V (min = +0.13 V, max = +0.77 V) ALARM VCore 2: +1.49 V (min = +0.27 V, max = +0.03 V) ALARM +3.3V: +3.34 V (min = +0.45 V, max = +0.38 V) ALARM +5V: +5.08 V (min = +3.87 V, max = +2.15 V) ALARM +12V: +11.55 V (min = +0.12 V, max = +5.84 V) ALARM -12V: -10.29 V (min = -0.11 V, max = -4.67 V) ALARM -5V: -4.65 V (min = -1.69 V, max = -0.10 V) ALARM fan1: 0 RPM (min = -1 RPM, div = 2) ALARM fan2: 0 RPM (min = -1 RPM, div = 2) ALARM fan3: 0 RPM (min = 337500 RPM, div = 2) ALARM temp: +25.0?C (high = +65?C, hyst = +12?C) vid: +3.50 V alarms: Chassis intrusion detection ALARM ?? me puzzled, I had that in before, but not after the force command you asked for, sorry. Reboot and try again... root at silly:~# modprobe i2c_isa root at silly:~# modprobe lm78 root at silly:~# sensors No sensors found! root at silly:~# rmmod lm78 root at silly:~# modprobe lm78 force_lm78=9191,0x290 root at silly:~# sensors lm78-isa-0290 Adapter: ISA adapter VCore 1: +2.03 V (min = +0.13 V, max = +0.77 V) ALARM VCore 2: +1.49 V (min = +0.27 V, max = +0.03 V) ALARM +3.3V: +3.33 V (min = +0.45 V, max = +0.38 V) ALARM +5V: +5.08 V (min = +3.87 V, max = +2.15 V) ALARM +12V: +11.55 V (min = +0.12 V, max = +5.84 V) ALARM -12V: -10.24 V (min = -0.11 V, max = -4.67 V) ALARM -5V: -4.65 V (min = -1.69 V, max = -0.10 V) ALARM fan1: 0 RPM (min = -1 RPM, div = 2) ALARM fan2: 0 RPM (min = -1 RPM, div = 2) ALARM fan3: 0 RPM (min = 337500 RPM, div = 2) ALARM temp: +25.0?C (high = +65?C, hyst = +12?C) vid: +3.50 V alarms: Chassis intrusion detection ALARM Okay! Thank you. Above is uncalibrated, so it looks good. Perhaps I'll throw in auto-fan-div, whatever, 'cos I can test it now. Cheers, Grant.
