On Mon, 2005-08-01 at 16:09, Eric J. Bowersox wrote: > I haven't tested this particular code yet, but that will happen shortly, > once our production engineers find me an X6DHP box to tinker with. Well, that's changed...I *have* tested it now on an X6DHP box running SuSE Enterprise 9 with the 2.6.13-rc3-mm3 kernel (plus the lm93 driver) and lm_sensors 2.9.1. When loaded normally, the driver puts these messages into the system log: Aug 2 12:53:58 cr0219en kernel: i801_smbus 0000:00:1f.3: I2C_SMBUS_I2C_BLOCK_READ not DB! Aug 2 12:53:58 cr0219en kernel: lm93 0-002e: lm93: block read data failed, command 0xf5. (This gets repeated over and over, with the "command" value in the message changing to values like 0xf9, 0xf6, 0xf7, and 0xf4.) And, under these circumstances, the sensor readings are essentially blank; all 0's for voltage, all -1's for fan speed, and all 0's for temperature. I unloaded the module and reloaded it with disable_block=1 (thank you Mark for thinking of that option!), and the sensor readings looked more reasonable. Any idea what's going on here? Obviously, the block operations in the driver are hosed somehow, I'm just not sure where to look for the source of the hosation... Eric -- Eric J. Bowersox, Software Engineer Aspen Systems, Inc. <ericb at aspsys.com> 3900 Youngfield Street Tel: +01 303 431 4606 x113 Wheat Ridge, CO 80033, USA Fax: +01 303 431 7196 <http://www.aspsys.com>
